Toyota Rav4 - Dash Cam VIOFO A229 PRO Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2024

ความคิดเห็น • 12

  • @fog10101
    @fog10101 2 หลายเดือนก่อน +3

    the wire is in the way of the side airbags..you can remove those panels to set the cable clear of the airbags.

  • @xpert1241
    @xpert1241 19 วันที่ผ่านมา

    For the RAV4, what fuses did you tap into for both ACC & Battery? Also with the specific fuses that you tapped into, have you experienced any random shutdowns during parking mode? For my RAV4, after the 90 second delay to start Parking Mode, my camera ends up shutting off.

  • @motobombay8895
    @motobombay8895 5 หลายเดือนก่อน +1

    Hello sir, did he mention the reason behind not hard wiring the dashcam ? One of the reasons i m thinking of buying the A229 Pro is the parking recording feature but you cant use it with the usb power. Does the hard wiring effect the other electronics or battery of the car ?

    • @4am4life-cc3oh
      @4am4life-cc3oh  5 หลายเดือนก่อน +1

      Hello...the reason being he does not want to void his warranty, since it is a new vehicle

    • @4am4life-cc3oh
      @4am4life-cc3oh  5 หลายเดือนก่อน

      Hello..there are a few options in hard wiring...since the dash cam will be on if you hard wire, it will consume battery voltage of the existing car battery...a option would be to run a external battery

  • @shawnay9106
    @shawnay9106 2 หลายเดือนก่อน

    How did he remove the camera from the stand in 7:33? Is it deattachable?

    • @4am4life-cc3oh
      @4am4life-cc3oh  2 หลายเดือนก่อน

      Hello...yes the camera is detachable from the base plate

  • @angieCity90
    @angieCity90 3 หลายเดือนก่อน

    Man I wanted to like this but you cut out the most crucial wiring part for the front dash cam.

    • @4am4life-cc3oh
      @4am4life-cc3oh  3 หลายเดือนก่อน

      Hi..the front cam just has the power and the rear/interior plug in for the camera, the power is also a plug in

    • @angieCity90
      @angieCity90 3 หลายเดือนก่อน

      @@4am4life-cc3oh my issue concerns is where theres supposed to be a hole in the center counsel to run the wire through. My issue is that mine has a light connected there haha so I am unable to go that route it seems like

  • @takerrn
    @takerrn 5 หลายเดือนก่อน

    Illegally mounted in driver's view. Why in the world would you install it down there?

    • @4am4life-cc3oh
      @4am4life-cc3oh  5 หลายเดือนก่อน +1

      Hello...it may appear to be mounted low..but it's just beneath the front sensors, as my colleague is a new and sole driver ,safety is a primary concern and his visibility outward is not blocked by this unit