Nice! What’s your plan for rear window? The can am sight shows the rear window doesn’t work with XMR, but I think from looking at the install instructions on their website that it should work. Or was there another rear window you were going use?
It’s not easy as clamps are aluminum and I used a pinch and a hammer to slowly knock it out of its clips. It will mark up the clamps unfortunately. Any dirt that got between the clamps from riding make more friction. When I replaced the window I made sure it was all cleaned off, but still needed the pinch and hammer to tap it back in place. It only needs to move about 1 inch I believe to release
I’m not sure the size, but there is a nut already on the terminals, so I reused it. Just the one nut without a second jam nut. It has held for last 1000 miles no issues
in this video it is the can am glass windshield with wiper. I have since broken it in a rollover. It has been replaced with Super ATV coated poly windshield which works with the can am wiper system.
Just bought one, it’s being shipped. Really appreciate the video. Good job lining out the steps and sht needing to be removed and how to remove them. I’m notorious for snapping the hidden brackets! One small critique… go easier on whipping the camera from the subject item back to your face to talk. It’s hard on the eyes…not your face😂 …the actual blur and movement of the video 😵💫
Sorry about camera…was trying to be quick so folks didn’t lose attention. I realized while editing the effect. I’ll keep that in mind in future! Good luck with the install!
Just want to let you know, that’s how most ball valves are, if it’s straight in line with the flow, means it’s open, thanks for the video
Great video. I'm getting the Maverick XMR. I've got the heater, W/S,top and doors on order.
Nice! What’s your plan for rear window? The can am sight shows the rear window doesn’t work with XMR, but I think from looking at the install instructions on their website that it should work. Or was there another rear window you were going use?
Can I get a copy of your instructions
Mine didn’t come with any
running the coolant line the way you did would you still need to remove the shock?
Nope, I did not have to do anything with shocks since all the cutting and such was under the dash area
Any update on the way you tan the coolant lines? Leaks does it work as good?
Haven’t had an issue with coolant lines, works well
@@Bullyveldthey what size was the coolant line and what size is the line that comes off the T to heater?
hey man.. your windshield.. it came with two clamps to hold the sides.. howd you installed those. i cant manage to do it. and its kickin my butt.
It’s not easy as clamps are aluminum and I used a pinch and a hammer to slowly knock it out of its clips. It will mark up the clamps unfortunately. Any dirt that got between the clamps from riding make more friction. When I replaced the window I made sure it was all cleaned off, but still needed the pinch and hammer to tap it back in place. It only needs to move about 1 inch I believe to release
@@Bullyveldt its a pain.. mine they appear they both right side.. they are identicall
What size Jam nut did u use for the accessory terminals ?
I’m not sure the size, but there is a nut already on the terminals, so I reused it. Just the one nut without a second jam nut. It has held for last 1000 miles no issues
Nice installation! Which windshield do you have?
in this video it is the can am glass windshield with wiper. I have since broken it in a rollover. It has been replaced with Super ATV coated poly windshield which works with the can am wiper system.
How long did the entire install take?
Did it all in one full day. So maybe 8hours alone?
Just bought one, it’s being shipped. Really appreciate the video. Good job lining out the steps and sht needing to be removed and how to remove them. I’m notorious for snapping the hidden brackets! One small critique… go easier on whipping the camera from the subject item back to your face to talk. It’s hard on the eyes…not your face😂 …the actual blur and movement of the video 😵💫
Sorry about camera…was trying to be quick so folks didn’t lose attention. I realized while editing the effect. I’ll keep that in mind in future! Good luck with the install!