I am currently working on placing company/business/organizational branding on a curved, 3-Dimensional surface; However, the brand logo is simply an extruded, planar image. My goal is to effectively 'drape' the logo and brand text over the 3-Dimensional surface. Is this achieved using the Soap Skin and Bubble extension, or should I use a different extension?
You are quite literally the best! Thank you for always explaining everything in a clear and easy-for-my-brain-to-take-in way 🙏 You have saved me so many hours of work.
Like you I use this extensively for fixing holes in terrain geometry or to berm up and berm down into pedestrian paths. One time I built a whole 12 acre site for a school using only this tool. It is amazing.
I cannot seem to get the PRESSURE box draw a circle, delete center, highlight edge lay down mesh (grid) hit enter, press soap bubble...no pressure box appears, though the word appears upper left. no value, area turns white and is flat. any thoughts/ reinstall?
👍 I always liked this plugin very much! Important to know: It has a determinate runtime however and is from then on no longer usable anymore. I never managed to find out how or if you can somehow reactivate this plugin again... (I hoped so much you had illuminated this small but very important aspect 😉)
@@Thesketchupessentials Thank you for encouraging me for the 100th time to repeat this reinstall procedure - obviously you have magical powers because actually: for the first time I had success 🤣😮👍 thanks again and I will continue to trust your magic when I do not get ahead 😂
Hi Justin, I am new to your channel and really like to watch your show and your tips. Great job. I wonder though what kind/year of Sketchup you are using. 😊
Amazing tool-- I'm having issues with soapskin actually fully "healing" a hole in a non-coplanar surface. It's close, but it doesn't perfectly close the hole. I can't seem to figure out how to do that and was hoping your video covered that. At about 10:49 in your video you change the divisions from 10 to 20 and it appears to take your flat soapskin and curve it to match the surface with the hole in it. But I can't replicate this behavior. Help.
Sir please make a video on how to use the cursor properly and know where your lines are going... I always feel confused where my line is going... either horizontal or vertical in case of 3d... not flat structure
Hi everyone! Let me know what you're using Soap Skin and Bubble for in the comments below! :)
I am currently working on placing company/business/organizational branding on a curved, 3-Dimensional surface; However, the brand logo is simply an extruded, planar image. My goal is to effectively 'drape' the logo and brand text over the 3-Dimensional surface. Is this achieved using the Soap Skin and Bubble extension, or should I use a different extension?
heey.... i have put the value but its not effecting..please hlp
You are quite literally the best! Thank you for always explaining everything in a clear and easy-for-my-brain-to-take-in way 🙏 You have saved me so many hours of work.
Glad it helped!
Like you I use this extensively for fixing holes in terrain geometry or to berm up and berm down into pedestrian paths. One time I built a whole 12 acre site for a school using only this tool. It is amazing.
It is definitely amazing!
it does not work for me whenever i try using skin bubble i get a notification saying that there's time limit is there any solution ?
I cannot seem to get the PRESSURE box draw a circle, delete center, highlight edge lay down mesh (grid) hit enter, press soap bubble...no pressure box appears, though the word appears upper left. no value, area turns white and is flat. any thoughts/ reinstall?
Justin: Thanks for the update. Interesting. JB McGee
👍 I always liked this plugin very much!
Important to know: It has a determinate runtime however and is from then on no longer usable anymore. I never managed to find out how or if you can somehow reactivate this plugin again...
(I hoped so much you had illuminated this small but very important aspect 😉)
Just uninstall it and reinstall a new copy from the extension warehouse. Meant to talk about this and forgot to
@@Thesketchupessentials Thank you for encouraging me for the 100th time to repeat this reinstall procedure - obviously you have magical powers because actually: for the first time I had success 🤣😮👍 thanks again and I will continue to trust your magic when I do not get ahead 😂
HI SIR, I CANT USE SOAP SKIN BUBBLE FOR IT ALWAYS APPEARS "TIME LIMIT FINISH". WHAT IS THE PROBLEM?
PLEASE ADVISE
same problem! how to solve it??
Justin seni seviyoruz .💪👍😍
Best guy
Hi Justin, I am new to your channel and really like to watch your show and your tips. Great job. I wonder though what kind/year of Sketchup you are using. 😊
2022 Pro
Amazing tool-- I'm having issues with soapskin actually fully "healing" a hole in a non-coplanar surface. It's close, but it doesn't perfectly close the hole. I can't seem to figure out how to do that and was hoping your video covered that. At about 10:49 in your video you change the divisions from 10 to 20 and it appears to take your flat soapskin and curve it to match the surface with the hole in it. But I can't replicate this behavior. Help.
Is the hole really small? Try scaling the object up 10x, running the tool, then scaling it back down to .1
do the sketchup extensions work for the 2017 free version or is it only applicable for the full versions of the newer editions?
Extensions will work for the 2017 free version just fine, so long as the extension lists 2017 among its compatible versions!
Mine just only flat. Can't be pressured up😭
press enter after creating a skin, i had the same problem.
Im using skp 2021, when i install soapskin and bubble the toolbar wont show. Please help
Did you enable it?
@@Thesketchupessentials it wont show in the extensions management window.
Can anyone help me, the skin keeps having voids in it and idk how to solve this problem. If I just draw lines it doesn’t become as smooth
I love you bro thank you
Can work it on Sk2023 bro ??
hi .any idea about how draw hydrofoil wing based in naca profile using this plugin?
Wow..
:)
Sir please make a video on how to use the cursor properly and know where your lines are going... I always feel confused where my line is going... either horizontal or vertical in case of 3d... not flat structure
I can't get the download from the link, can someone please send me the plugin file
Me too. I can't find that both in 3D warehouse and sketchucation.