🟢 Drill STRAIGHT Holes (5 Easy Ways without a Drill Press)
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- I'm going to go through 5 easy ways to drill straight / perfectly perpendicular holes WITHOUT a drill press or making drilling jigs that take hours to make. I'll show how to drill straight holes with different methods and tools that are fast, easy and reliable. We'll discuss options like an easy to make guide, drilling tricks and a couple of commercial alternatives to help you keep your drill bits straight when making holes.
Here are links to tools I talked about in this video.
Milescraft Drill Block:
www.homedepot....
www.amazon.com...
Other Drill Guides that are Block-like (apparently Milescraft has a trademark on Drill Block)
www.amazon.com...
DrillMate Portable Power Drill Guide
www.homedepot....
www.amazon.com...
Other portable drill guides:
www.amazon.com...
My legal disclaimer.
DIY and Home Improvement involve risk of personal injury and should be done with care. Please adhere to all safety recommendations from material and tool manufacturers and check your local codes. Some work may involve permits and it is your responsibility to comply with your local building officials.
My videos are for entertainment purposes only. Although I hope you learn something, I'm not a professional and you are responsible for making sure you know what you are doing before taking on any home improvement task. If you do something dumb that results in personal injury or property damage, that's on you. I'm in no way responsible for your workmanship and results if they are terrible, or even if they come out great. That said, I wish you much success in your DIY projects.
How dare you make an informative video in under four minutes? Great info and to the point.
I know right... I should have babbled on and on.
@@DIYWithAaron Where was the ad for Square Space?
And no annoying background music.
I'm new to drilling. I actually thought I was a failure for failing to drill a straight hole. Nice to know that this problem is so common that products have been made to solve it.
Have seen too many videos on this topic and almost gave this one a pass, but then, glad I watched it. Very nice video, no fuss, straight to the point and most importantly, very nice options listed out.
Do post more tips&tricks for DIY'ers..
Thanks... I'm glad I hit the mark with this one. I'll be sure to keep posting more vids.
Agreed. Best part, no stupid, loud guitar riff intro like most creators use.
Just used the two blocks of scrap wood in the clamp option. Fantastic result. You will make experts of us all 😀
Thank you for making this as straightforward as possible
A major plus for the drill block you showed is the V shaped cutout in the bottom that allows you to drill crosswise through the centre of a dowel or pipe.
Definitely!
Thank you for sharing this. I used a speed square with mixed results. A drill block is in my future. Thanks man.
I've used a drill block for years, and it's great. My top pick.
Yeah, I really like them too. Cheap and effective for most tasks.
The clamping together of 2 pieces of wood is a great idea since it is quick and the surfaces can be shifted/re-sawn as they become worn.
You are a great teacher! Looking forward to see your channel grow exponentially! 💪👏
I love the CD trick, I'll try it next time
Excellent video. Great ideas, clearly presented. Very helpful. Thanks.
Thank you! The portable drill guide looks perfect for drilling horizontally - it's so easy to get this wrong if the hole is a different height than you are, or if drilling into brick etc. Off to buy one now.
Glad it helped!
The only cutting faces on a drill bit are the two leading edges so once you've got the hole started the rest will follow, so removing the drill block to drill deeper or thorugh a peice is no issue so long as you let the hole guide the bit. Nice post by the way.
This is why I love youtube. Thanks for posting this.
You're welcome
The offset blocks are a great idea. Great info!
Since I have a drill press, I drilled a hole into a block of wood, put it on the bench and made sure it was level. Then I chucked the bit into my hand drill and stuck it into the hole. Then I glued a circular level to the back of the drill and made sure it was level. Now, I can free-hand a vertical hole pretty well by keeping the bubble centered in the level as I drill.
What if you need to drill a hole straight into the face of a board that is attached at and angle or at least not perfectly level? Your method is good for things like anchor bolts but the video is much more practical for the things most people will encounter.
@@joshcowden6163 If that is the unfortunate situation that you find yourself in, then I cannot help you. I would consider hiding under the bed, or, better, changing your name and moving out of town.
Super helpful!!! Thanks for putting this out there for us perfectionists…
You can also use a plunge router to start a straight hole at least. It has the flat bottom plate to align it with the material you want to drill. It functions similar to the alignment tool. Just the travel is pretty limited. .. :o)
Trick no 3 is GODLIKE!
Dude, thank you so much. Im here because I made a mistake, more than once. Headed to Lowe's for both a drill block and drill guide.
I have one of those Drill Blocks I bought a few years ago. They work great. Better than trying to eyeball the drill. Yes you cant drill a deep as you would like, but the hole becomes your guide to finish drilling.
Excellent and well researched advice.
Comprehensively explained in clear concise language. Many thanks! 🙏🏼
Thanks for the reminder. I have a drill block, now just locate it 😅
this is really helpful for guitar builders on a budget, thank you so much
Happy to help!
Exactly the video I was hoping for. Thanks Aaron.
Excellent. While I am sure that drilling straight into a block of wood siting on your bench maybe easy for some, these tips have really helped me drilling straight into wood where I have very poor access. A small scrap wood 90o jig was a brilliant idea. Thank you.
#4 works great. They even make ones for drill and tapping holes in pipes that had a curved base.
great video, used your link and bought the drill block
Awesome, thank you!
well finally --never knew there was such a gadget as a drill block ==love your two wood guide for straight drilling --90 degrees -----thankyou --many of us cannot afford a fancy drill post guide ----well done--- from the poor artisans club !
Short and to the point. I like it. Thanks for the good information.
I use an drill block or guide made by Big Gator Tools. It has the v shape cutout on the bottom for drilling in round pieces. It works very well. I bought it online from USA. And this purchase has a little funny story. At customs office when I received the package and opened it for inspection the customs dude was stunned. He had never saw something lile this until then and called a coleague to look at the guide, to make sure it's not a firearm part. I was prepared for that and I pulled out an drill bit from my pocket and showed them how it works. They asked why I bought it from USA, because there are some taxes I have to pay. I told them that their reaction to seeing it is the answer. There was nothing like that guide, to be found on Romania's tools market, and the EU sellers asked more than double the price in the US. This happened more than 10 years ago. Now there are several options to buy, locally, but all are polymer body with metal bushing, not solid hardened steel like the Gator guide.
Wow... I didn't realize the drill blocks were so hard to get in other countries. If I had to go though all that hassle to get one at a reasonable price I would have went for an all metal one too. Good thing you thought ahead and had a drill bit handy for explaining it to customs.
New to the channel, but based on how great this video was, I will be checking out more of your content!
Awesome, thank you!
Great video. I will make that jig with the 2 pieces of wood but those drill blocks look pretty sweet too.
Thanks man! High value, straight to the point
Excellent info thanks
Best video on the subject.
The DrillBlock is for me. I appreciate your to-the-point videos minus stupid blasting music and an audition.
Thank you very good job
Thank you for your video. (That scrap wood jig has worked well for me. But I think I'd like to graduate to a drill block. I may purchase one soon. Thank you again for your video). God[Bible] Bless.
Great info, thanks
Great tips! Have a project I've been working on that stumped me about how to drill some holes straight. Now I know how- Thanks! Liked and subscribed.
Excellent info, exactly what I was looking for! Thanks 👍
This video helped a lot. I'm building an end table and I realized after doing the glue-up that it's not going to fit in my drill press. I have an old Craftsman drill guide with drill permanently attached drill but it has the smallest jacobs chuck I have ever seen and can't take the bit I need.
Awesome thank you 😊
This is extremely useful. Thanks
Wow a speed square actually works really well, thanks
That was just what I needed! Thank you for sharing!
There is hope for my project. Thank you.
Nice video mate, it's really helpful...
For the second con of the drill block (drill bit not matching the hole), you can drill a hole one size smaller, and then widen it with a bigger drill bit.
Big gator tools drill guides, they make a few varieties. I use them for attaching door hardware either mag locks or door holders.
Drill blocks are used expensively in the aircraft industry but with a little foot on each corner to accommodate the curvatures
I did not know that... you mean extensively not expensively right?
@@DIYWithAaron yes extensively I used them nearly everyday as aircraft Fitter with Airbus
Very helpful video! Thank you!
You can start with drill block then use the wood blocks to keep you straight. 🎸. Great video. Thanks. I'm putting handles on cabinets not sure if a portable drill press is necessary. If holes are less than 1" inch deep then ill be okay without a press.
Thanks for the video, very informative and helpful; will try finding a precision drill guide.
thanks for the tips!
Thanks for the video
Great tips! Thank you!
Nice video. Very helpful!
CD was interesting to say the least. Thank you
The drill guides usually have a V shaped groove in the base so you can put a pipe or other cylinder in it to drill centered holes.
Good point... I probably should have mentioned that in the video. The portable mini drill press also has a V machined into it's base for the same purpose.
#3 is awesome
Great video! Thanks for sharing bro. I have a little recommendation to save some money. It will either be for free pretty much or really cheap! and all it takes is a little effort and scrap metal. you can make your own drill blocks! if you already own a drill press, mill or even a metal lathe or maybe can get access to one of the above. All you really need is a scrap piece of steel, cast iron, Aluminum, possibly bronze or even a hard wood a could work in a pinch. So bring your most used drill bit sizes with you. Simply drill a series of all your most used Drills and then you have a drill press accurate Drill block that works great! And youll save alot of money! The gator brand drill blocks are pretty pricey for all sizes. so i did this to save money. I had some scrap metal so i didnt spend a dime on it. You may ask why would someone need this if you have a drill press? Well the short answer is the portability of the drill block. Sometimes i have to go to sites and need to drill fairly accurate holes but only have a power drill. So this works great for those situatuons, Or maybe you just need one hole and dont want to go in your shop to drill it lol (ive been this lazy many times!) Lol anyways its useful and youll find yourself using it almost anytime you need to drill holes. If you use hardwood it will not last as long or stay as accurate as steel, cast iron or even Aluminum or some other harder metals maybe even softer like bronze could work for a while. Well good luck everyone and i hope you all have a nice day. Thanks for reading my free book lol
Thanks for the positive feedback. I totally agree that making your own drill block is a lot cheaper if you already have a drill press. I was specifically thinking of those who didn't have a drill press and needed to be able to make a straight hole on occasion. Good tips though for making a drill block for those times when a drill press is unfeasible or inconvenient.
Nice tips!
Great tips!
Thanks for this you are a top man! 👌😀
Great video! Excellent tips.
Thanks fot demonstration. I already subscribed.
Most useful video!!
Glad it was helpful!
DUDE... Thia video is exciting ! Thanks fir the tips.... this old man 74 can use etc. make more video's please ! Mike Hendershot, Beaumont, California. Oct. 23. 2021
Thanks Mike! Glad you liked it... I'll try to get more vids out soon.
Very nice
Thanks a lot!
Really useful, thanks man
i use the chin metod its pretty reliable
Excellent 👌
Great video man
I bought a Cheap drillpress 14 years ago, 30 euros, 350 Watts; still fine and accurate, wood or metal, semi_pro use. Cheaper than your handbill and lots of fiddling
Wish I had a cheap drill press, but I still don't have one. Spent too much on my drill I guess.
genius!
Great video, I subscribed immediately, thanks for the great tips
Great video bruh❤🔥
Great video brother. Good job!
Appreciate it!
I epoxied two 1 inch spirit levels to my drill. One for level and one for plumb. Or I use a drill guide.
I glue a small round bubble level to the back of the drill. Not perfect results but helps a lot if I want to quickly drill free hand
That's a good idea. I used to have an old drill with a level in built into the head although it was vial style so no side to side accuracy unfortunately. I could see your way with a bubble level being much more useful then what I had.
I was going to make a floating shelf out of a 1 inch board and I needed to drill on the thickness of the board so this is what I did to make my whole straight I got a another piece of board and cut out A straight piece and made it 1 and 1/2 in in width 6 in in length after drilling the straight hole into the middle of the thickness of the wood I then glued a piece of wood on top that was 1 in thick 6in log 6 in width top and bottom so that it slides it looks like a c-channel like a letter C if you look on the side of it and that slides into the board because the one and a half inches will guide your drill bit nice and straight and Improvement to the idea you could add a piece of pipe so that you don't mess up the hole that's made out of wood since the drill could go sideways a little and then make the whole crooked so that's why you would put a piece of pipe but since I had steady hands I just did it this way I didn't feel like doing extra work with the pipe plus I didn't have a tool to cut the pipe ended up not using that wood cuz it was too heavy so I ended up using quarter of an inch plywood some high density spray foam and I just put a hole using some Square Dill rods to create the holes that the pipe with or the spike or whatever you call it that goes through the holes to hold it up and I glue those in there where all the holes needed to be at and the rest I just sprayed it was pray foam to keep the spray foam from bending the wood I just made another floating shelf out of thicker wood and then that would fit inside that that's keeping from warping it and that's how I did it and then I just shaved off a chunk with an utility knife those ones that you can pull it out more and more blade a light weight strong making a lightweight floating shelf i did not needit to hold heavy thing it worked out fin
I didn't quite follow your entire description of what you did, but I think I got the gist. I'm glad it worked out for you.
CC is a good thing...
Great guide! I am wondering , if there is a home-made jig for a forstner drill bit at all?
You could make a 90 degree scrap jig with a notch at the bottom for the bit head to fit. As long as the shaft of the drill bit is nestled in the corner, it would probably work.
Howdy.
Bewilders me that drill manufactures have not thought of furnishing drills with bubble levels ...
Regards.
I have an old Ryobi with spirit levels built into it. Not a bubble level, but adding levels did cross at least one manufacturer's mind.
Plunge routers work really well too, if you have one that is.
Good call!
The two pieces of wood clamped together, save me! Thank you
I knew I should have kept all of those AOL CDs.
Wow. You're right. It must have been a diabolical plan to improve the drilling accuracy of the entire nation. Brilliant.😂
I’ve always wondered why manufacturers don’t include.a flat surface to the top of their machines which lies parallel to the axis of the drill bit? This surface could then be lined up with anything that would give the required straight hole. Also a spirit level, perhaps two lying at right angles to each other could guide when drilling holes in walls.
I know some manufacturers, like Ryobi, have added bubble and/or spirit levels to their drills in the past to help you line things up. Drilling perfectly perpendicular holes to a work surface is a pretty specific requirement most cordless drill owners probably won't care much about when buying a drill so I'm not surprised manufacturers don't focus on it much.
Great video help. I tried one of your methods and struck oil.
This is how videos should be done.
I have an old Ryobi battery drill that has a centre bubble level on the end of it, so, when you drill you just watch the bubble.
Love the content bro!! First time watching, definitely subbing and smashing the bell!!🤙
Appreciate it!!
for me it's a homemade drill block made from an off-cut of hardwood. 8 bucks cheaper than buying one but you do need access to a drill press 👍
If you got access to a drill press then yeah definitely save yourself the money. But if you don't, then $8 is a no brainer for a drill block.
I was about to order a drill block, luckily i remembered that i have a printer, so i just 3d printed one lol
Thanks awesome.
What's a CD
It's an arciac music playback storage medium once used by the ancients in the long, long ago before digital music. If you can't find one, a DVD (slightly less stone-age) will work too.
@@DIYWithAaron 🤣
The best method for me is to mount the work in a vertical position. then you use a square L ruler to put your drill vertically straight, you then have to maintain that position while moving your head back, a great way to do that is to keep your left hand in touch/between the battery of your drill and the workpiece (so the motion of moving your head is not going to disturb the vertical alignment). Then after you just horizontally center it by eyeballing, which is the easiest part. Also, you would want you left hand on the back of the motor of your drill to maintain precision
Sounds like you perfected that method. Mounting the workpeice vertically seems like it would help quite a bit with the precision.