those caps on the end are out of this world. I'm still skeptical about the Titebond, but I can't say it won't work!!. I would have loved to see this installed, but I guess you have the owner to contend with. Great idea, and about your router table: It ain't stupid if it works.
Thanks for watching and commenting on this video. FWIW you can learn how to make those end caps that 'are out of this world' here: th-cam.com/video/d6qdzzbb-ns/w-d-xo.html Where Titebond III is concerned, I can tell you straight up: if it makes you skeptical, you're doing it wrong! I've never once had a glue joint fail from failure of the glue. My client would have been fine with me doing a video of the install (which turned out great BTW) but it just didn't work to produce a video during that phase of the project.
After 30 years of being a carpenter, I’ve learned that guys that need elaborate set ups are no different than guys who drive big trucks…they like to stroke their own egos! Simple and smart saves time and money and is much more satisfying in the end! Your the best carpenter on the tube! Keep the “getto” setups coming Mr. Jackson!
I like your videos because they're not "Hey look at what my brand new $15,000 machine can do for me!". You do practical and efficient work. There's nothing here that's just you trying to show off, this is what real woodworking is. There are too many videos/channels that glamourize it past practicality, making things overly complex just for the sake of showing off what they (or often their equipment) can do. This is true craftsmanship, keep it up!
I hear you, there are a lot of makers that I have liked. I do want to see them thrive and prosper but there gets to be this point where it goes from being something you can learn from an imitate to being like a tour of a 10 million dollar home, alien and unrelatable.
It’s what I call the Napkin Holder Effect. How many TH-cam woodworkers ever build different types of napkin holders? I think maybe Carmichael Woodworks and Steve Ramsey have maybe done one and that’s it. In reality I think we end up making far more napkin holders. It’s an easy project.
Love your show, those corporate sponsored rookies have nothing on you! I am just starting wood working at 62yrs old, the genius you teach is so amazing. Please never stop.
I really appreciate your comment about not being a bought off mouthpiece of a corporate sponsor. Thank you for being a truthful unbiased content provider.
When my dad worked as a boat engineer in a local fishing village, he watched an old-hand spend several hours sizing up a 12 foot length of oak beam. He needed to pass a propeller transmission bore through it. Finally, he picked up an adze and squared the beam into shape between his feet, then bored a straight hole through the whole damned thing using a hand-cranked auger. We're talking the late 1960's here. I still have difficulties comprehending dad's account, but as a man whose history involved working to 1/1000ths inch as a machinist, he wasn't the sort to exaggerate his testimony. To him, this was the finest display of engineering accuracy he had ever seen. To be fair I believe it to be the ballsiest. I think he saw the last of the old shipwrights draw the last breath in the new era. In this new era, you have done justice to an old-hand's way. Wonderful video. Best wishes from Ireland.
Matt Jackson, you are a carpentry and woodworking wizard. The whole intro I'm trying to guess how you "drilled" those holes and then when I saw the solution coming I said, he's not going to ....no, he's not...he can't possibly...he is...he is going to do that! I've seen every one of your videos and all your patron videos and I have to tell you this one is one of the best. There's so much here .....a well thought out project, a genius solution to having to do a build/breakdown/reassemble and perfect execution. So good. Thank you Matt.
Thanks Rick... it was an enjoyable video project all the way through. I appreciate your comment here and, judging by gently applied "thumbs ups" to your comment, others do too! Best, Matt FWIW The next Patron-only video has a bit of in-depth info showing more about the mortising and drilling procedure along with insight into the dedicated jigs created to make those steps quick, accurate and repeatable...
Hello Matt, I am known as Boyd. I have a little over 60 years in this woodworking trade, everything from from the ground up home building to furniture. No matter where the sawdust is from I love it. New in the trade folks are sometimes cruel but that is just a form of flattery, jealousy is painful so they must act childish. I am sure you have heard the old adage " when you do the best you can with what you have, no one, anywhere. can do better". At or around age 70 I found myself believing the only person I absolutely must impress is me, life is sure easier that way. Keep up the good work, some of us appreciate quality when we see it.
no snarky comments about your workshop from me. as a retired one man shop, professional furniture maker, i can honestly tell you i have less gear than the youtube amateurs. money put into needless tools in the workshop is money that doesn't go into your pocket. i was interested in your drilling method till you announced how it was done. its a trick i have used myself many times to run wires through desks etc. your right it may be simple but not many amateurs know it.
My goal is to make woodworking productive, profitable and enjoyable but if I've also made it cool in the process that's... well.... COOL! 😎 Thanks for watching and commenting Thomas... much appreciated! Best, Matt
This is exactly how I figured out to route cables in my lighting projects a few months ago. I'm creating 1" square milled stock and then using a jig to 'drill' a wire channel using a palm router (my channels are 1/4" for comparison). Thanks for sharing, Matt! BTW - I think your router table is freaking brilliant.
Matt does better work in his smaller shop with fewer older tools then a fully sponsored larger shop completely equipped with the latest tools. Gives me hope. I really love this channel. You got me with creating the holes, I was expecting to see a long boring bar, long drill bit or other clever Mcguyver type setup. After all he previously showed us all how to bore through an 8 inch wall with a piece of wire. Nicely done, thanks for sharing.
That's neat, and I like your approach and style. Not just the technique but the little finishes. I noticed your sign that "efficiency is intelligent laziness." Guess you gave an admirable demonstration of that. Well done and thank you.
Nice job. It's far better to watch useful information on a typical $100 router then to watch non repeatable information on a $3000 shaper that the typical person doesn't have access to. That handsaw trick is a golden nugget.
Thanks Joel... I'm known to say "it's not what you got that counts but how you use it". Fancy equipment is great and all but is just an embarrassment to those who have it and know so little about using it IMHO.
@@NextLevelCarpentry your absolutely right. That right there is wisdom. I have several of my grandpa's tools in my garage that are nothing more then a motor, and belt. Every time I use them to sharpen my knives or sand a piece of wood it's a lesson remembered. Keep being yourself and us youngsters might learn a thing or two and recall those lessons later on in life. Hopefully also passing them on.
You know... I've never even considered using this kind of method... I didn't even guess what you were going to do until the router was mentioned, then it clicked. Awesome tip. You earned my like.
That's quite a compliment Steven... thank you! I think you will find other videos at Next Level carpentry equally informative but also equally produced by a non-professional video producer. 😉😎
Practical, workman-like, repeatable advice is what you are all about. It comes through that you are making a living off of the carpentry. I love many of the content makers, but I like watching a professional do the work. Ballet in the shop!!
I spent a couple nights trying to figure how to work this one out on a couple floor lamps...heaven sent...looking at it this morning, thank you so much for the tip....yes sir...I´m drinking a cold one on your behalf... thanks for the videos
Should work like a charm for a floor lamp! FWIW it's fun to make an extra piece to show people when the project is done to see if they can figure out how you did it😎 have fun with your project... Best, Matt
No complaints about the joinery or engineering. Excellent way to make it happen Matt. In my climate we still dig up a few pump logs, cedar logs five inch around with a two inch hole drilled end to end, typically a ring of inch by eighth mild steel is driven onto the ends to keep them from splitting when driven together. My neighbor has the the ' cast in place bearings' machine that among its multiple functions has a PTO at knee hieght to drive these auger bits 54" into the log.
You, sir, just earned yourself another subscriber. Love your style and your techniques are smart and really accessible by novice woodworkers like myself. We need more like you. I mean I also like the ones of have two million dollars worth of top end tools, but I think we all know, most of the time we're just watching those for what we WISH we could have and do. It's guys like you who show us how to get things done in our own shops.
New sub . Love the channel 👍👍. . 45 years of experience . We do what works . Make yer own stuff 👍👍🙄. Safety first beginners , safety first . It’s good for the soul and good for your wallet . A good carpenter nowadays can always stay busy and make a cpl grand a week if yer smart . The world needs some more skilled trades . I m not seeing young men enter the trades but more smaller companies doing one thing . I want the whole thing . It takes years and years to learn and continually doing so . This man is a treasure to share this knowledge . Everything can be done dofeerently but it’s awesome to get different viewpoints form many people . This man knows too. He learned form many and now we lean form him . Thanks !
I enjoy this channel because it reflects a man's knowledge learned on the job. As an engineer I've seen many fellow engineers that felt no need to get into the "shop". Calculate, model, check, draw and release. Yep, all good but so many times manufacturing requires a tool and often a one of. Your site employs learned adaption to get it done without gargantuan expense. ( like sending planks to Ithaca to bore on their barrel driller). In shipyards, the tool and dye maker is one of the most skilled and valuable artisans.
Very clever way to "bore" perfect holes in long stocks. Yout techniques are very unique and most often the best option to achieve what appears to be a difficult task. Your videos are not only informative but also very funny too
I love your bunk bed ladder design. And your core drilling solution, and your pyramid plug, and your HD router table design. I guess you could say I love your video!
Unreal, those are some pretty good tricks. I'm like, three months and two exams away from finishing my cabinetmaking apprenticeship here and they're starting to give me my own jobs. I've managed to impress them a couple times by breaking out some Next Level ideas, so thanks for that.
They say that person needs 7 seconds to like or dislike someone.. Will,it's truth..I knew that i'm gonna gently press that like and subscribe buttons...Love your whole style..Greetings from Croatia!
I as well spent 45 years as a 3rd generation carpenter and really like your videos! I've learned a few things from watching your videos! I love learning more!
Thanks for watching and commenting... I really try to pack as much a real-world practical Woodworking and Carpentry information into videos here on the channel as I can with hopes it will benefit viewers like you...
@@NextLevelCarpentry These tricks are logical, but one might have trouble coming up with them in the first place. With woodworking profession fading away (sadly), your efforts might help others learn stuff by themselves, or at least get some useful inspiration.
Outstanding video, Matt. Not only do you have a simple way of making those holes but the clamping, glue clean-up inside and outside the board is smart. Thanks for adding to my knowledge.
Allthough all the steps you make to get a good result are relatively easy, and are actually nothing new, the proces as a whole is very elegant and ensure a perfect end result! Amazing video, thanks for sharing😁👍
I am always taught something new whenever I watch. You commentary lightens up the SERIOUSNESS. I remodel homes for a career. Cool stuff is always needed. I looked around for a 6 foot long spade bit. Hmmm? No I don't need one. Thanks. On to the next level.
At 78 years of age, I'm more into smaller projects but will file this idea in my brain, just in case. I want to build a chair designed for my infirmities and I think this will be helpful. You've gained another subscriber.
As others have said thank you for the way real woodworkers accomplish a task by using the tool between their ears also the fact you are a craftsman rather than a latest and greatest tool hacker . Skill and knowledge make the difference
Awesome! I thought that I was going to see magic and, instead, saw ingenuity (or, at least, efficiency and bad spelling). Great idea and I love your ghetto router table.
Glad to hear it... FWIW there's a lot of other videos on the Next Level Carpentry Channel so I hope you find more that you like to watch 'over and over'? Best, Matt
"Ghetto" router table lol. This is so simple and BRILLANT! I would have pondered this one for days/weeks I'm sure and never have come up with the fix. The mortise and tendon is cool as well. Thanks Matt.
@@NextLevelCarpentry I've also been using this ghetto router table for years, if not worse (getting the router in the vice, using my hands and a prayer to make a rabbet, etc) it's not the prettiest thing in the world, but it gets the job done. Sometimes the space in the shop Is the number one issue, and there simply isn't any real estate to keep a router table at all times. Good job on the holes, and the video, it was enjoyable to see the process.
This is actually one of the best channels I have seen. There are many good instructional channels and videos out there but what sets you apart is you show how to solve the tasks in an environment not bolstered by a myriad of high-end,expensive machinery, tools and fixtures. You show that you can improvise e.g. a router table and get a fantastic result, you don’t have to invest in everything to get started. Oh, and it is evident that you definitely know what you are talking about. So appreciation and a greeting from Sweden, a country where woodworking is thriving.
Brilliant! And so personable! Killer job! When I was a young man (kid, basically, forty couple years ago), I built an elevated bed for our home to bring my new wife to. I put it together with lags, and you know what? That bed's upstairs in one of the bedrooms in this house I built. Cheers!
I have been a work worker for many years and you never know it all. It's nice to be able to see an excellent wood worker solve a sound method of assembly after a great design. Keep up the great work and videos.
Never stop teaching... so I can never stop learning! Always appreciated, and FYI, bad one-liners are part of the reason I'm here. I like many of the other channels too, but very few can touch your craftsmanship.
Michael... using find sawdust and a putty knife is definitely a paradigm shift for glue cleanup compared to water and Rags but once I made the shift I never looked back...
You are proud of your self and your solutions to various problems, and you should be. The values we get from your channel with your clever ideas and very good explanations! It is very generous of you. That router table set up, for instance, adds value, not the opposite. Many of us cannot afford anything else. Thank you Matt.
Excellent method, excellent video, excellent instructor. My favorite instructor BTW. Another method not requiring a router table setup (I'm lazy): For holes that are less than 2x length of your long drill bit...it is faster to split wood (as in video), run a center grove the entire length of both boards (not too deep), join pieces (as in video) then drill using the newly made square hole from each end.
Such an incredible video. So much that is so good about this video that I don't even know where to begin. I'll keep it short and simply give it a 100 out of 10. Production value of video is super high quality. Whoever does your editing gets a gold star. So good!!! Thanks for posting!
Matt Excellent Video. Appreciate your creativity in these projects but especially what I call the Old Way of life. Demonstrating you don’t need expensive equipment to do these projects. You have helped me on my learning curve and approach to other methods by showing me/us a few life tricks. Again Thank You.
It is clear that you really enjoyed this project. This is one of your best. A simple elegant solution nicely executed with loads of nice added touches. The end caps for joinery and the saw techniques go into my mental files for future projects Near as I can tell, what you do has provided you with a good living so you owe no one any justifications. None.
Well Matt, you sold me about three minutes in. I subscribed and will be watching your new shows, and going through your video archive. I've done woodworking all my life, and every time I touch a piece of wood, learn something new. You've already made me better at what I enjoy.
Wonderful video. A fine looking project. You are going to have one happy customer. And right not you have one happy viewer...I liked your work and your video. Thank you. Dr. G.W.
Nice design and presentation Matt, this bed will definitely last forever. When you started i was intrigued and anxious to see the magic way you're going to drill a hole in such a long member.
Splendid answer to a nice design. Well done. I used a hole saw to cut slugs in very dense wood (1 5/8 cuts a 1 1/2 slug). Bored and glued into the end grain to receive the slug. And used a lag bolt (two 3/8) to secure a head/ foot board. Holding up for over 15 years.
those caps on the end are out of this world. I'm still skeptical about the Titebond, but I can't say it won't work!!. I would have loved to see this installed, but I guess you have the owner to contend with. Great idea, and about your router table: It ain't stupid if it works.
Thanks for watching and commenting on this video. FWIW you can learn how to make those end caps that 'are out of this world' here: th-cam.com/video/d6qdzzbb-ns/w-d-xo.html Where Titebond III is concerned, I can tell you straight up: if it makes you skeptical, you're doing it wrong! I've never once had a glue joint fail from failure of the glue. My client would have been fine with me doing a video of the install (which turned out great BTW) but it just didn't work to produce a video during that phase of the project.
1 minute tips and tricks videos would send this channel to the top
After 30 years of being a carpenter, I’ve learned that guys that need elaborate set ups are no different than guys who drive big trucks…they like to stroke their own egos! Simple and smart saves time and money and is much more satisfying in the end! Your the best carpenter on the tube! Keep the “getto” setups coming Mr. Jackson!
Thank you for your sharing your 45yrs experience in all your videos for all of us that do not have all that knowledge
You're quite welcome.. it's what I do. 😎
I like your videos because they're not "Hey look at what my brand new $15,000 machine can do for me!". You do practical and efficient work. There's nothing here that's just you trying to show off, this is what real woodworking is. There are too many videos/channels that glamourize it past practicality, making things overly complex just for the sake of showing off what they (or often their equipment) can do. This is true craftsmanship, keep it up!
Don't you mean the ... "$15,000 machine that my corporate sponsor gave me"...
I hear you, there are a lot of makers that I have liked. I do want to see them thrive and prosper but there gets to be this point where it goes from being something you can learn from an imitate to being like a tour of a 10 million dollar home, alien and unrelatable.
Showing off a festool tracksaw gets a do not recommend channel.
It’s what I call the Napkin Holder Effect. How many TH-cam woodworkers ever build different types of napkin holders? I think maybe Carmichael Woodworks and Steve Ramsey have maybe done one and that’s it. In reality I think we end up making far more napkin holders. It’s an easy project.
@@gregac1984 heello sir
It’s awesome to see someone who thinks and makes it easier for people without thousands of dollars worth of tools. Keep the videos coming. Great job.
Love your show, those corporate sponsored rookies have nothing on you! I am just starting wood working at 62yrs old, the genius you teach is so amazing. Please never stop.
I really appreciate your comment about not being a bought off mouthpiece of a corporate sponsor. Thank you for being a truthful unbiased content provider.
I love that router table, simple, cheap and does the job perfectly. Simple is beautiful!
When my dad worked as a boat engineer in a local fishing village, he watched an old-hand spend several hours sizing up a 12 foot length of oak beam. He needed to pass a propeller transmission bore through it. Finally, he picked up an adze and squared the beam into shape between his feet, then bored a straight hole through the whole damned thing using a hand-cranked auger. We're talking the late 1960's here. I still have difficulties comprehending dad's account, but as a man whose history involved working to 1/1000ths inch as a machinist, he wasn't the sort to exaggerate his testimony. To him, this was the finest display of engineering accuracy he had ever seen. To be fair I believe it to be the ballsiest. I think he saw the last of the old shipwrights draw the last breath in the new era.
In this new era, you have done justice to an old-hand's way. Wonderful video.
Best wishes from Ireland.
Loss of knowledge that dies any time a ledgendary shipwright passes is sad indeed!
thank-you for your tips and tricks I like your instructions and your witty comments. thank-you very Much. :)
Matt Jackson, you are a carpentry and woodworking wizard. The whole intro I'm trying to guess how you "drilled" those holes and then when I saw the solution coming I said, he's not going to ....no, he's not...he can't possibly...he is...he is going to do that! I've seen every one of your videos and all your patron videos and I have to tell you this one is one of the best. There's so much here .....a well thought out project, a genius solution to having to do a build/breakdown/reassemble and perfect execution. So good. Thank you Matt.
Thanks Rick... it was an enjoyable video project all the way through. I appreciate your comment here and, judging by gently applied "thumbs ups" to your comment, others do too! Best, Matt
FWIW The next Patron-only video has a bit of in-depth info showing more about the mortising and drilling procedure along with insight into the dedicated jigs created to make those steps quick, accurate and repeatable...
Love the showmanship -- not splashy, but clever, just like your designs and build process. Thank you for taking the time to film this and share it!!
Hello Matt, I am known as Boyd. I have a little over 60 years in this woodworking trade, everything from from the ground up home building to furniture. No matter where the sawdust is from I love it. New in the trade folks are sometimes cruel but that is just a form of flattery, jealousy is painful so they must act childish. I am sure you have heard the old adage " when you do the best you can with what you have, no one, anywhere. can do better". At or around age 70 I found myself believing the only person I absolutely must impress is me, life is sure easier that way. Keep up the good work, some of us appreciate quality when we see it.
I’ve been doing this 35 years. 28 years in business. 1 employee for 23 of those and this the best and bout only thing I watch on TH-cam.
no snarky comments about your workshop from me. as a retired one man shop, professional furniture maker, i can honestly tell you i have less gear than the youtube amateurs. money put into needless tools in the workshop is money that doesn't go into your pocket. i was interested in your drilling method till you announced how it was done. its a trick i have used myself many times to run wires through desks etc. your right it may be simple but not many amateurs know it.
Man, you’ve actually made woodworking cool.
Great job. Thanks
My goal is to make woodworking productive, profitable and enjoyable but if I've also made it cool in the process that's... well.... COOL! 😎 Thanks for watching and commenting Thomas... much appreciated!
Best, Matt
Thumbs up was gently tapped. Thanks for this awesome trick!
This is exactly how I figured out to route cables in my lighting projects a few months ago. I'm creating 1" square milled stock and then using a jig to 'drill' a wire channel using a palm router (my channels are 1/4" for comparison). Thanks for sharing, Matt! BTW - I think your router table is freaking brilliant.
Master at work here. Very practical. Thanks for sharing your knowledge.
Matt does better work in his smaller shop with fewer older tools then a fully sponsored larger shop completely equipped with the latest tools.
Gives me hope. I really love this channel. You got me with creating the holes, I was expecting to see a long boring bar, long drill bit or other clever Mcguyver type setup. After all he previously showed us all how to bore through an 8 inch wall with a piece of wire. Nicely done, thanks for sharing.
That wire trick is something. And I just like his style.
@@anneoreilly4900 Thanks for sayin'! Best, Matt
The refacing of RSC with a hand saw is just genius. I'm 70 and this is a first for me . Love it.
That's neat, and I like your approach and style. Not just the technique but the little finishes. I noticed your sign that "efficiency is intelligent laziness."
Guess you gave an admirable demonstration of that.
Well done and thank you.
Nice job. It's far better to watch useful information on a typical $100 router then to watch non repeatable information on a $3000 shaper that the typical person doesn't have access to.
That handsaw trick is a golden nugget.
Thanks Joel... I'm known to say "it's not what you got that counts but how you use it". Fancy equipment is great and all but is just an embarrassment to those who have it and know so little about using it IMHO.
@@NextLevelCarpentry your absolutely right. That right there is wisdom.
I have several of my grandpa's tools in my garage that are nothing more then a motor, and belt. Every time I use them to sharpen my knives or sand a piece of wood it's a lesson remembered.
Keep being yourself and us youngsters might learn a thing or two and recall those lessons later on in life. Hopefully also passing them on.
Absolutely Brilliant! 👍 45 years of experience is very valuable.
Thank you for sharing your talent with all of us. It's greatly appreciated.💥
You know... I've never even considered using this kind of method... I didn't even guess what you were going to do until the router was mentioned, then it clicked.
Awesome tip. You earned my like.
New subscriber today. Learned more in this video than watching 2 years of some of the other You Tube woodworking channels
That's quite a compliment Steven... thank you! I think you will find other videos at Next Level carpentry equally informative but also equally produced by a non-professional video producer. 😉😎
Practical, workman-like, repeatable advice is what you are all about. It comes through that you are making a living off of the carpentry. I love many of the content makers, but I like watching a professional do the work. Ballet in the shop!!
You are a true master! cheers from Toronto Canada!!
I'm a carpenter since 30 years. And I learned something here. Thanks! :-)
very clever from 84 year old young man from New Zealand
Like how you saved the 6x6 post material.
The router techniques were awesome.
I spent a couple nights trying to figure how to work this one out on a couple floor lamps...heaven sent...looking at it this morning, thank you so much for the tip....yes sir...I´m drinking a cold one on your behalf... thanks for the videos
Should work like a charm for a floor lamp! FWIW it's fun to make an extra piece to show people when the project is done to see if they can figure out how you did it😎 have fun with your project...
Best, Matt
Just gently tapped the 👍🏼 Button and it actually works! No more smashing anymore!
No complaints about the joinery or engineering.
Excellent way to make it happen Matt.
In my climate we still dig up a few pump logs, cedar logs five inch around with a two inch hole drilled end to end, typically a ring of inch by eighth mild steel is driven onto the ends to keep them from splitting when driven together.
My neighbor has the the ' cast in place bearings' machine that among its multiple functions has a PTO at knee hieght to drive these auger bits 54" into the log.
ABSOLUTELY _BRILLIANT!!!_ (And your motto "Efficiency is intelligent laziness" is brilliant too.)
Thank you Ardeshir... Glad you like my motto... except, as I've been told, for my misspelling of "Laziness"😯
@@NextLevelCarpentry It's the thought that counts! ;-)
You, sir, just earned yourself another subscriber. Love your style and your techniques are smart and really accessible by novice woodworkers like myself. We need more like you. I mean I also like the ones of have two million dollars worth of top end tools, but I think we all know, most of the time we're just watching those for what we WISH we could have and do. It's guys like you who show us how to get things done in our own shops.
I'm 62 and have been perfecting my carpentry to this day. Now I have another trick in my ever-expanding bag! Thanks Matt!
You're sure welcome KLM... thanks for watching and commenting on this one! Best, Matt
That hand saw tip at the end was amazing. Nice tip!
Like a great detective story... had me sitting on the edge of my seat!
I gotta say, I am more than impressed !
Ty for sharing the tip.
New sub . Love the channel 👍👍. . 45 years of experience . We do what works . Make yer own stuff 👍👍🙄. Safety first beginners , safety first . It’s good for the soul and good for your wallet . A good carpenter nowadays can always stay busy and make a cpl grand a week if yer smart . The world needs some more skilled trades . I m not seeing young men enter the trades but more smaller companies doing one thing . I want the whole thing . It takes years and years to learn and continually doing so . This man is a treasure to share this knowledge . Everything can be done dofeerently but it’s awesome to get different viewpoints form many people . This man knows too. He learned form many and now we lean form him . Thanks !
Thank you for kindly sharing your wise methods. You Sir are an Artist, inventor and comic. I tip my hat in your direction.
Thanks for taking the time to show us your tricks and tips
I like the play on words on your sign, also the techniques and setup are clever. Thanks for sharing this info!
The hand saw trick into the rough sawn cedar alone was outstanding.... as always madman.
I enjoy this channel because it reflects a man's knowledge learned on the job. As an engineer I've seen many fellow engineers that felt no need to get into the "shop". Calculate, model, check, draw and release. Yep, all good but so many times manufacturing requires a tool and often a one of. Your site employs learned adaption to get it done without gargantuan expense. ( like sending planks to Ithaca to bore on their barrel driller). In shipyards, the tool and dye maker is one of the most skilled and valuable artisans.
Very clever way to "bore" perfect holes in long stocks. Yout techniques are very unique and most often the best option to achieve what appears to be a difficult task. Your videos are not only informative but also very funny too
Genius idea! A simple solution to a complex problem.
I love your bunk bed ladder design. And your core drilling solution, and your pyramid plug, and your HD router table design. I guess you could say I love your video!
“Necessity is the mother of invention”. - Figuring stuff out and work arounds is what it’s all about!!!
Great Video…..
THANKS FOR THE RUFF SAWN RESTORE TRICK !!!!!
Truly a craftsman!
New subscriber here. I’ve been a woodworker for 22 yrs and I can definitely relate with a ghetto tool setup 😂
Unreal, those are some pretty good tricks. I'm like, three months and two exams away from finishing my cabinetmaking apprenticeship here and they're starting to give me my own jobs. I've managed to impress them a couple times by breaking out some Next Level ideas, so thanks for that.
They say that person needs 7 seconds to like or dislike someone.. Will,it's truth..I knew that i'm gonna gently press that like and subscribe buttons...Love your whole style..Greetings from Croatia!
I as well spent 45 years as a 3rd generation carpenter and really like your videos! I've learned a few things from watching your videos! I love learning more!
I do some casual woodworking here and there. I think that your channel is my discovery of this year. Your patents are invaluable. Thanks.
Thanks for watching and commenting... I really try to pack as much a real-world practical Woodworking and Carpentry information into videos here on the channel as I can with hopes it will benefit viewers like you...
@@NextLevelCarpentry These tricks are logical, but one might have trouble coming up with them in the first place. With woodworking profession fading away (sadly), your efforts might help others learn stuff by themselves, or at least get some useful inspiration.
Outstanding video, Matt. Not only do you have a simple way of making those holes but the clamping, glue clean-up inside and outside the board is smart. Thanks for adding to my knowledge.
Allthough all the steps you make to get a good result are relatively easy, and are actually nothing new, the proces as a whole is very elegant and ensure a perfect end result! Amazing video, thanks for sharing😁👍
Like I said, once you know the solution, the process is quite routine, just like watching a magic trick AFTER you know how it's done...
I am always taught something new whenever I watch. You commentary lightens up the SERIOUSNESS. I remodel homes for a career. Cool stuff is always needed. I looked around for a 6 foot long spade bit. Hmmm? No I don't need one. Thanks. On to the next level.
Well, that is cool! I also have been in the business for 40 years. I am impressed!
Impressing a guy who's spent 40 years in the trenches is a real compliment to me which I really appreciate so, thanks Michael!
Best, Matt
Absolutely flippin genius !
Why ? Because I’ll never forget it and look forward to freakin someone out with it someday.
I worked for over a year on such a "ghetto router setup" :D
It's not a pleasure, but it gets the job done. Thumps up for you my man! Keep it up!
At 78 years of age, I'm more into smaller projects but will file this idea in my brain, just in case. I want to build a chair designed for my infirmities and I think this will be helpful. You've gained another subscriber.
As others have said thank you for the way real woodworkers accomplish a task by using the tool between their ears also the fact you are a craftsman rather than a latest and greatest tool hacker . Skill and knowledge make the difference
You're smart!! That's a brilliant solution to a vexing problem!!
Awesome! I thought that I was going to see magic and, instead, saw ingenuity (or, at least, efficiency and bad spelling). Great idea and I love your ghetto router table.
I watch this video over and over…love your work
Glad to hear it... FWIW there's a lot of other videos on the Next Level Carpentry Channel so I hope you find more that you like to watch 'over and over'?
Best,
Matt
Very clever and shows tremendous ingenuity.
"Ghetto" router table lol. This is so simple and BRILLANT! I would have pondered this one for days/weeks I'm sure and never have come up with the fix. The mortise and tendon is cool as well. Thanks Matt.
Been using that trick for decades, anytime a project involves rough sawn cedar... necessity is the mother of invention, right?
Best, Matt
@@NextLevelCarpentry I've also been using this ghetto router table for years, if not worse (getting the router in the vice, using my hands and a prayer to make a rabbet, etc) it's not the prettiest thing in the world, but it gets the job done. Sometimes the space in the shop Is the number one issue, and there simply isn't any real estate to keep a router table at all times. Good job on the holes, and the video, it was enjoyable to see the process.
@@LucasRipetta kudos on makin' due... and thx!!
To date this is my favourite project.
I love using the saw to rough up the face - incredibly effective. Thanks so much.
Who knew, right? 😎
This is actually one of the best channels I have seen. There are many good instructional channels and videos out there but what sets you apart is you show how to solve the tasks in an environment not bolstered by a myriad of high-end,expensive machinery, tools and fixtures. You show that you can improvise e.g. a router table and get a fantastic result, you don’t have to invest in everything to get started. Oh, and it is evident that you definitely know what you are talking about. So appreciation and a greeting from Sweden, a country where woodworking is thriving.
Thanks for watching and commenting from Sweeden Jan... much appreciated! Curious what it is about woodworking that you see there...
Best, Matt
that rough sawn match trick is awesome! You are awesome at what you do!
Brilliant! And so personable!
Killer job!
When I was a young man (kid, basically, forty couple years ago), I built an elevated bed for our home to bring my new wife to. I put it together with lags, and you know what? That bed's upstairs in one of the bedrooms in this house I built.
Cheers!
One of the GOATs of carpentry.
I have been a work worker for many years and you never know it all. It's nice to be able to see an excellent wood worker solve a sound method of assembly after a great design. Keep up the great work and videos.
Never stop teaching... so I can never stop learning! Always appreciated, and FYI, bad one-liners are part of the reason I'm here. I like many of the other channels too, but very few can touch your craftsmanship.
Great Idea - Seriously !
Very clever Macgyver'd hole. Bravo.
Love you attitude and sense of humor, thanks for the video!!
Thank you, for the idea of taking saw dust and sprinkling it on the glue to make it a easier cleanup. Didn't learn that in wood working.
Michael... using find sawdust and a putty knife is definitely a paradigm shift for glue cleanup compared to water and Rags but once I made the shift I never looked back...
You are proud of your self and your solutions to various problems, and you should be. The values we get from your channel with your clever ideas and very good explanations! It is very generous of you. That router table set up, for instance, adds value, not the opposite. Many of us cannot afford anything else. Thank you Matt.
Thanks for another video with (as I've come to expect) a unique and clever solution to an "impossible" problem.
Excellent method, excellent video, excellent instructor. My favorite instructor BTW. Another method not requiring a router table setup (I'm lazy): For holes that are less than 2x length of your long drill bit...it is faster to split wood (as in video), run a center grove the entire length of both boards (not too deep), join pieces (as in video) then drill using the newly made square hole from each end.
A decent alternative method for anyone without access to a router table... thanks for adding your thoughts here!
Such an incredible video. So much that is so good about this video that I don't even know where to begin. I'll keep it short and simply give it a 100 out of 10. Production value of video is super high quality. Whoever does your editing gets a gold star. So good!!! Thanks for posting!
Thank you for the lesson, uncle Matt.
Matt Excellent Video. Appreciate your creativity in these projects but especially what I call the Old Way of life. Demonstrating you don’t need expensive equipment to do these projects. You have helped me on my learning curve and approach to other methods by showing me/us a few life tricks. Again Thank You.
Hope we see a photo of the final installation!!! So well done!!!
Brilliant solution. I have learned plenty from your videos. Thank you!
It is clear that you really enjoyed this project. This is one of your best. A simple elegant solution nicely executed with loads of nice added touches. The end caps for joinery and the saw techniques go into my mental files for future projects Near as I can tell, what you do has provided you with a good living so you owe no one any justifications. None.
Well Matt, you sold me about three minutes in. I subscribed and will be watching your new shows, and going through your video archive. I've done woodworking all my life, and every time I touch a piece of wood, learn something new. You've already made me better at what I enjoy.
Wonderful video. A fine looking project. You are going to have one happy customer. And right not you have one happy viewer...I liked your work and your video. Thank you. Dr. G.W.
What an idea and I was wondering about the squeeze out within the hole, nicely done
Nice design and presentation Matt, this bed will definitely last forever. When you started i was intrigued and anxious to see the magic way you're going to drill a hole in such a long member.
Great stuff. Side note: I like how the drawer in your bench works a support for the opposite end of stuff in your wood vise.
Splendid answer to a nice design. Well done.
I used a hole saw to cut slugs in very dense wood (1 5/8 cuts a 1 1/2 slug).
Bored and glued into the end grain to receive the slug.
And used a lag bolt (two 3/8) to secure a head/ foot board.
Holding up for over 15 years.
Good system, mate. Cheers from Australia 🇦🇺🇦🇺
This video solved a mystery for me. Thank you.
Using the sawdust over the glued parts is pretty clever.
Thumbs up and . . . I subscribed.
Very slick design and execution - well done.