@garageeleven I have the electron billitron on my trx250r. But also a oem honda 38mm pwk on my 1985 cr250. The billitron is great, but the pwk is just as good if not better at times.
Video description should read "visual comparison of Lectron vs. Chineese replica and installation on my RM250." We did not see how it performs, real world or otherwise. Can it hold up to the demands of the RM250? We did not find out. ✔ Detailed breakdown of the Chinese Lectron carb [ ] See how it performs in real riding conditions [ ] Honest review on value for money Honest waste of a half hour of my life.
This video was more to slag off the China carb for not needing to sell a kidney. I would imagine just like the rip off PWK china carbs they perform reasonably well with a few caveats.
I purchased what looks like one of these fake lecterns from my local dealer thinking I was getting the real deal. The carb has leaks, difficult to tune, fowls plugs a lot. hard to start after sitting over night. Very frustrating. It works great for altitude changes , fuel savings and great power down low to full throttle but tired of going through plugs. I have talked to Lectron a number of times trying to sort it out with no luck. Seeing your description of the 2 carbs and I see mine is exactly like your fake one. I’m interested in seeing how your testing goes. Been thinking of trying a smart carb to fix my problem. I won’t buy another lectron. Thanks for taking the time to test these and make awareness of this problem / deception out there. O ya I paid full price for my counterfeit carb. Ouch!
Temu sells this carb for 60$and i instaled it on the rm125 starts first kick runs awesome for 1/8 th of the price of the real one!! Lectron wouldn't sell me tge metering rod due to its not for tgere carb so keep that on the hush lol there 🍆
Bullshit video! I watched till the end to see you start it and you cut away before you kick it over! First and last video i watch in this idiots channel. @@garageeleven
@@garageeleven exactly, but i bet if you start meassuring you will see that it will be the exact same meassurement. to be honest, i never had a "replica" lectron. but from expirience i know that most of these "fake/replica carbs" most of the time comes from the exact same factory, my quess is that in the factory there are left overs for what ever reason, those left overs, some chinese guy buys them cheap, put some jets in it and resells it as a knock off for way cheaper. i had this with "replica" keihin carbs i prepared to run on methanol engines. and just last week i had it with dellorto carb, i had a carb on my moped that said dellorto, but it was nagged and i couldnt get the carb right, so i bought this dellorto out of china with nothing on it. bought it for 20 bucks, meassured everything and everything meassuredment was identical. also the real dellorto had a plastic floater housing, and plastic throttle slide. the "20 bucks one" had everything made out of alloy/metal.. so even better then the real dellorto in my opinion. excuse my abc bad english by the way.
That take off oem carb is the best carb in this video
Yeah they are a solid thing and super reliable
@garageeleven I have the electron billitron on my trx250r. But also a oem honda 38mm pwk on my 1985 cr250. The billitron is great, but the pwk is just as good if not better at times.
Video description should read "visual comparison of Lectron vs. Chineese replica and installation on my RM250." We did not see how it performs, real world or otherwise. Can it hold up to the demands of the RM250? We did not find out.
✔ Detailed breakdown of the Chinese Lectron carb
[ ] See how it performs in real riding conditions
[ ] Honest review on value for money
Honest waste of a half hour of my life.
This video was more to slag off the China carb for not needing to sell a kidney.
I would imagine just like the rip off PWK china carbs they perform reasonably well with a few caveats.
Another video please. I need to see if they are worth it and if they work the same way. By the way, good video.
No worries! thanks heaps for the feedback. I will be doing a follow up video with our CR500, I bought one for that to as we ride it alot more.
I purchased what looks like one of these fake lecterns from my local dealer thinking I was getting the real deal. The carb has leaks, difficult to tune, fowls plugs a lot. hard to start after sitting over night. Very frustrating. It works great for altitude changes , fuel savings and great power down low to full throttle but tired of going through plugs. I have talked to Lectron a number of times trying to sort it out with no luck. Seeing your description of the 2 carbs and I see mine is exactly like your fake one. I’m interested in seeing how your testing goes. Been thinking of trying a smart carb to fix my problem. I won’t buy another lectron. Thanks for taking the time to test these and make awareness of this problem / deception out there. O ya I paid full price for my counterfeit carb. Ouch!
How did they compare? Curious to see follow up Video. Thanks!
Otro video por favor. Necesito ver si merecen la pena y si su funcionamiento es el mismo. Por cierto, buen video
hello. can you tell us how it runs? thanks
Temu sells this carb for 60$and i instaled it on the rm125 starts first kick runs awesome for 1/8 th of the price of the real one!! Lectron wouldn't sell me tge metering rod due to its not for tgere carb so keep that on the hush lol there 🍆
I ended up throwing it in the bin.There is no way to adjust the metering rod...That was a deal breaker for me.
Let's get the follow up video here thanks
Does the fake one really have rod height adjustment? I also have a fake one like this and it does not.
I'm just a banshee guy here for the salty anti Chinese and anti lectron boomer comments 😂
@@zp9898 hahahahah
there is marking on fake lectron on rod and slide
When’s next one mare
2000-2001 cr's had a mikuni tmx. horrible carb with such finicky jetting
Wrong the 00 had a pwk airstriker and 01 had mikuni
Fake video description.
probably
Bullshit video! I watched till the end to see you start it and you cut away before you kick it over! First and last video i watch in this idiots channel. @@garageeleven
Still no update?
we did do an update but it got pulled down, so far so good, the fake lectron pulls really hard and is easy enough to adjust
@@garageeleven can you try to do it again? Bc i wanna see the vid:)
save your money buy the fake one and buy an original needle. 🤣
Industrial espionage in said country.
The dreaded H series
Be interesting to see how it holds up
China already makes a legit metering carb with the XTNG, sad they are doing this pale imitation.
There both junk
Walaweh 😅
Copy ori gred AAA ✌🏻😁
same factory.
one says lectron, other one says nothing.
same carb.
yeah they look identical
@@garageeleven they are
@@kasper-jw2441 yeah its wild, the only thing on the "replica" one is there isnt any numbering on the rod or the slide
@@garageeleven exactly, but i bet if you start meassuring you will see that it will be the exact same meassurement.
to be honest, i never had a "replica" lectron.
but from expirience i know that most of these "fake/replica carbs" most of the time comes from the exact same factory, my quess is that in the factory there are left overs for what ever reason, those left overs, some chinese guy buys them cheap, put some jets in it and resells it as a knock off for way cheaper.
i had this with "replica" keihin carbs i prepared to run on methanol engines.
and just last week i had it with dellorto carb, i had a carb on my moped that said dellorto, but it was nagged and i couldnt get the carb right, so i bought this dellorto out of china with nothing on it. bought it for 20 bucks, meassured everything and everything meassuredment was identical.
also the real dellorto had a plastic floater housing, and plastic throttle slide. the "20 bucks one" had everything made out of alloy/metal.. so even better then the real dellorto in my opinion.
excuse my abc bad english by the way.
This is a problem you run into when you don't run your own manufacturing.
More so if you sell something with long expired patents
Can u give a link for the clone lectron
To much talking not enough doing