Great and straight forward video bro thanks for clearing everything up . im on the way to pick up a p06 with vtec conversion and used this video to compare it to the one I'm buying .
@@JiroProject hey johnny thanks for the video. I just bought a p05 that was hondata s300 ready and verified it has vtec and datalogging installed because of your video here. However i noticed this p05 doesnt have the capacitors at c51 and c52. Is this going to be a problem for me using this. If it needs clarified im gonna be running a b18c1 w/ manual transmission with hondata. again though thanks for the video.
good dear friend your video helped me a lot I just have a few questions I hope I can help I have an ecu p06 just that the code you say is different would open some problem if it is not the same I want to do vtec the ecu
the funny thing about that is, i dont sign my ecus anymore. I have a legit label. So if anyone has an ecu of mine that is signed, those are OG ecus i sold.
Nice and full detailed video, but I'm just wondering, did you tune or put basemap on the ecu before you start the engine or just plug it in after you rechipped it?
I have a complete ecu if youd like to purchase one. Also, i don't think they see any on ebay anymore and stores online sell them for an arm n leg now. message me at my IG @ johnny.muah.project
Lead free solder Solder wick Ground strap Tweezers Solder suction What about Solder gun temp And tip size (fine point tip I'm assuming)?? And what temperature do you recommend, what watt of the iron gun. And would solder flux be recommended?
Very good questions I never mentioned in the video. But if you use solder flux then you would have to wash the board with luke warm water and give it a really nice air blow dry (never run your ecus wet or moisture). I personally don't like the fine fine tips, nor beveled. i use 900M-T-B to be exact. Temp would be from 330°C to 350°C (626°F to 662°F). With my unit dial, it sits at 75 as my sweet spot. hope that helps.
I thought about it, but its pretty self explanatory. you put a solder wick on it and it just does its job. watched a few guys doing these vids and it just drags on and on
I have a p28 that won't give me any spark. Could I take the parts from that and use em in the p06 for the VTEC section? Someone also tried chipping that one, so I could probably take some of the chip parts from that too no?
Hi, i have a EK3 d15z6 engine and i want to swap my ecu, i find a p30 and p06 on similar price, which one you recomended to buy? In the future i want to do a mini-me on engine, thx.
if its a usdm p30 ecu from an obd1 del sol vtec, then that is the one i would choose since it already has vtec in it. p06 doesn't have vtec, but as you see in this video here, it's very simple to just solder it in.
hi johnny, sorry for disturb you. I have a p06 with vtec installed and honda s100. Can i mount an s300? will work in my prelude EU bb1 ? Really thanks in advance
yea pretty much you will just have to desolder what i soldered in from this video. or, if you'd like you can send it in to us and we can do it for you. Message me at my ig @Johnny.Muah.Project
Hey so…. P06 here. Running hondata s300 and I’m getting fuel prime with code 21 (CEL flashing long 2 times & once fast). Car runs like doodoo. Undriveable. Any ideas?
check the capacitors, or ic17, which is TA8903SN. and check code 21 - VTEC spool solenoid valve. Watch my vtec section part and see if everything is there and has nice solder contacts. Also make sure your vtec solenoid is wired in correctly or nothing is broken or loose.
Really great video but I have a question: Why did you use N411F? N411L would be better to my opinion because it has 4.7K ohm on both R1 and R2. It is the closest to the original NTE2368.
They make a lot fake chips out there. You can search comparisons on what to look for. But the good chips are lifetime reburnable. The fake ones are like 2 or 3 time burns and then they don't burn anymore. As for a retune, I would retune your car with any big or major mods like upgrade turbo, cams, etc.. hope that helps.
Good evening Please have a question: I have a HONDA CIVIC model 92 automatic box his electronic control unit is dead. In your opinion I can buy another not the same reference of a car manual box it works ?? thank you in advance 👍
Hey there brother I do not have a chip burner and in need of a p28 base map chip (already tuned) do you know where I can get a already tuned chip for my p06 if I chip it?
it is 100% recommended. I have actually gotten a few ecus where you couldn't even tell that it was burn/bad. Once i replaced it, you can see that it was burnt. So if anything, if its an easy replacement, just do it. hope that helped
I’m a little confused as I’m a bit new to Honda. Are all the little components responsible for the vtec or is it the chip that you installed? I guess what I’m really trying to ask is, what is the point of the final chip that you installed?
first step is for chipping the ecu, which the sst chip will become the new brain to the ecu. Chipping gives you the option to now tune your car with your specific mods using a program. Then the vtec section (top left of the ecu) is for ecus that doesn't have vtec, which a p06 doesn't. If you have a p28 or p72, then those have vtec already installed. If you're running a non vtec motor, then you wouldn't need it. hope that helps.
@@hamper116 what car and motor do you have? im guessing you did a z6 swap from a d15? if you can get a p28 ecu, thats the way to go. if you want to use your p06, chip it, and put a p28 basemap in, then that's another way.
@@JiroProject I have a del sol with a d15 at the moment and have a d16z6 that’s getting to getting ready to get dropped in. I’m not wanting to spend a fortune on a p28, so doing p06 to vtec conversion is what I’ll do
@@hamper116 yup then you're on the right track. but you'll need to get a p28 basemap burnt onto the sst chip, which we do that service as well if needed.
hello, nice video. can this be done in a p29 ecu? i cant find good info about it. also, buying those components at the local store should be fine? or they are something specific? (i have an eprom burner btw)
yea that ecu can be chipped. before buying the correct components, talk to the seller about the right parts for the conversion to your specific ecu. hope that helps.
The ecu I have there is a manual ecu. You don't have to remove those for that is what you see in an automatic ecu. if you did the auto to manual conversion, you have nothing to worry about.
I have never chipped a p27. But if the board looks exactly like the one in the video, then it should be the same and should work. If you need one, I do have a few still
@@brandonyu98 I do sell kits and or can chip your ecu if needed. I also have ecus that are chipped with vtec that I am currently selling. If interested in any of these please email me at Jiro_project@hotmail.com
Johnny Muah Project no my car was automatic and was converted to 5 speed with in si tranny and ecu when this was performed also when from dual point to multi-point ...... mpfi modification now I want to throw a vtec head and people have told to look for a p28 ecu or a p06 am asking you this cause I have found a lot of p06 and p28 automatic
@@davidgodinez5380 OH, well then yea you can use an automatic as long as you convert it to manual. its pretty much a manual now. all you need is to add vtec which is what I showed here in this video. And of course if your car is an obd0 you will have to convert it to obd1. hope that helps.
once vtec is install it will have vtec. but if you burn a ls b18a/b non vtec motor (for example) to your sst chip, then going by the reading of the chip it won't see vtec.
yea sorry about that. They are actually no longer selling anymore, so I go through different people/companies. If you need anything message me under the description. Thanks.
Good evening, a question please I have a civic 92 automatic box ecu 37820P06A50 engine D15b7 power 1.5L. I can change my ecu by 37820p06g50 without changing any component? please urgent thank you in advance
not 100% on what you're asking. but with that ecu, yes you can change it to manual, and also add vtec to it if needed. just do exactly what I did in the video.
Great and straight forward video bro thanks for clearing everything up . im on the way to pick up a p06 with vtec conversion and used this video to compare it to the one I'm buying .
you're welcome man. and thank you
@@JiroProject hey johnny thanks for the video. I just bought a p05 that was hondata s300 ready and verified it has vtec and datalogging installed because of your video here. However i noticed this p05 doesnt have the capacitors at c51 and c52. Is this going to be a problem for me using this. If it needs clarified im gonna be running a b18c1 w/ manual transmission with hondata. again though thanks for the video.
Nice
imagine falling for the ground strap meme
This video save me alot of money doing it myself.
Thanks alot man
all about helping.
good dear friend your video helped me a lot I just have a few questions I hope I can help I have an ecu p06 just that the code you say is different would open some problem if it is not the same I want to do vtec the ecu
when you buy a kit, just inform the seller what ecu you have and they will give you the parts you need.
great video; keep the ecu videos coming
I have a question about the p06 ecu the 4 pins that stick out of the CN2 location what are they for? Great video!
Man, you have great handwriting!
the funny thing about that is, i dont sign my ecus anymore. I have a legit label. So if anyone has an ecu of mine that is signed, those are OG ecus i sold.
Thank u Johnny just received my chipped po6
anytime, bro. thanks for reaching out
Nice and full detailed video, but I'm just wondering, did you tune or put basemap on the ecu before you start the engine or just plug it in after you rechipped it?
after your chip your ecu you'll need a basemap, yes. And then tuned from there. I wouldn't drive very far or long w/o a tune if you're boosted.
Great video. I love tgst its straight forward. Can you link me to a good conversion kit to buy
I have a complete ecu if youd like to purchase one. Also, i don't think they see any on ebay anymore and stores online sell them for an arm n leg now. message me at my IG @ johnny.muah.project
Houston, we have VTEC😎
you for got....YOOOOOOOO! VTEC YO!
Lead free solder
Solder wick
Ground strap
Tweezers
Solder suction
What about Solder gun temp And tip size (fine point tip I'm assuming)??
And what temperature do you recommend, what watt of the iron gun. And would solder flux be recommended?
Very good questions I never mentioned in the video. But if you use solder flux then you would have to wash the board with luke warm water and give it a really nice air blow dry (never run your ecus wet or moisture). I personally don't like the fine fine tips, nor beveled. i use 900M-T-B to be exact.
Temp would be from 330°C to 350°C (626°F to 662°F). With my unit dial, it sits at 75 as my sweet spot. hope that helps.
👍💪💯🔥
Do you sell the kit is there any other names for the nte 2368 i can find them anywhere .i have every other componenet needed
Very good details
You should add a clip of the de-soldering too
I thought about it, but its pretty self explanatory. you put a solder wick on it and it just does its job. watched a few guys doing these vids and it just drags on and on
@@JiroProject except my radioshack desoldering braid refuses to work.. something about flux and lead compatibility I think.
I have a p28 that won't give me any spark. Could I take the parts from that and use em in the p06 for the VTEC section? Someone also tried chipping that one, so I could probably take some of the chip parts from that too no?
awesome video!
I hVe chipped p28 but if I hVe ic15 and ic16 with transitor filled i think my tune cuts them out , should I take them off anyways ,
Hi, i have a EK3 d15z6 engine and i want to swap my ecu, i find a p30 and p06 on similar price, which one you recomended to buy? In the future i want to do a mini-me on engine, thx.
if its a usdm p30 ecu from an obd1 del sol vtec, then that is the one i would choose since it already has vtec in it. p06 doesn't have vtec, but as you see in this video here, it's very simple to just solder it in.
Will this allow you to do a Mini-Me swap for a d15 with a Y8 or Z6 head? (By adding the VTEC)
yes. and the chipping will get you to a tuner to tune your motor/car to spec
How could I get one to buy
nice video..👍
i wanna ask you,can p28 chip adding to honda p2j ecu(3stage vtec)?
no. thats obd2
hi johnny, sorry for disturb you. I have a p06 with vtec installed and honda s100. Can i mount an s300? will work in my prelude EU bb1 ? Really thanks in advance
Greetings brother I have a concern it is possible to run a Honda B16A2 engine with VTEC to an automatic tramsmicion
yes, you'll be just fine. as long as its a b series auto, it'll fit and work as it should. just think they have d16z6 automatic from the factory
Hi do you have a video on how to remove vtec ? Im running a non vtec car with p08 ecu.
yea pretty much you will just have to desolder what i soldered in from this video. or, if you'd like you can send it in to us and we can do it for you. Message me at my ig @Johnny.Muah.Project
Hi sir if i make 4.0 vtec enggage it posible
Hey so…. P06 here. Running hondata s300 and I’m getting fuel prime with code 21 (CEL flashing long 2 times & once fast). Car runs like doodoo. Undriveable. Any ideas?
check the capacitors, or ic17, which is TA8903SN. and check code 21 - VTEC spool solenoid valve. Watch my vtec section part and see if everything is there and has nice solder contacts. Also make sure your vtec solenoid is wired in correctly or nothing is broken or loose.
37820-p6x-t51 can do rechip or not?
yes we can
Really great video but I have a question:
Why did you use N411F?
N411L would be better to my opinion because it has 4.7K ohm on both R1 and R2. It is the closest to the original NTE2368.
Its what was provided to me. But works the same. never had an issue with these.
How often should u update ur system or the old chip is still good for a retune
They make a lot fake chips out there. You can search comparisons on what to look for. But the good chips are lifetime reburnable. The fake ones are like 2 or 3 time burns and then they don't burn anymore. As for a retune, I would retune your car with any big or major mods like upgrade turbo, cams, etc.. hope that helps.
@@JiroProject appreciate your help
Need one to buy for 95 Honda Accord
Good evening
Please have a question:
I have a HONDA CIVIC model 92 automatic box his electronic control unit is dead. In your opinion I can buy another not the same reference of a car manual box it works ??
thank you in advance 👍
yes, any automatic ecu for civics from 92-95 computer will work. Hope that answers your questions.
@@JiroProject Yes, thank you very much 👍
Hey there brother I do not have a chip burner and in need of a p28 base map chip (already tuned) do you know where I can get a already tuned chip for my p06 if I chip it?
I can get a chip burnt for you with p28 settings. Email me and we can further talk. Jiro_project@hotmail.com
Could u possibly drop a link for this item to chip a po6.. Im tryna run it in my 97 civic d16y7
give me an email at jiro_project@hotmail.com
@@JiroProject email sent
@@TheLegendaryTaco sorry didn't get anything yet. don't forget the underscore
If so do you have a link where I can buy some in bulk ??? People keep saying there not reburnable so I’m just asking you since you have experience
are you asking ecu's in bulk? or the resisters and/or conversions?
So I would have to remove C14 and install the provided capacitor I have the same ecu and board
it is 100% recommended. I have actually gotten a few ecus where you couldn't even tell that it was burn/bad. Once i replaced it, you can see that it was burnt. So if anything, if its an easy replacement, just do it. hope that helped
does it work with auto trans?
yes it does.
Hi, i have P08, and vtec, i must chip it?
Yes it can be done
How come the P6FD1 (philippine variant of D16Y5) runs vtec-e with a P06?
I’m a little confused as I’m a bit new to Honda. Are all the little components responsible for the vtec or is it the chip that you installed? I guess what I’m really trying to ask is, what is the point of the final chip that you installed?
first step is for chipping the ecu, which the sst chip will become the new brain to the ecu. Chipping gives you the option to now tune your car with your specific mods using a program. Then the vtec section (top left of the ecu) is for ecus that doesn't have vtec, which a p06 doesn't. If you have a p28 or p72, then those have vtec already installed. If you're running a non vtec motor, then you wouldn't need it. hope that helps.
@@JiroProject okay so if I just want to throw in a d16z6 into my car then I may as well do the entire process in the video. Also thank you
@@hamper116 what car and motor do you have? im guessing you did a z6 swap from a d15? if you can get a p28 ecu, thats the way to go. if you want to use your p06, chip it, and put a p28 basemap in, then that's another way.
@@JiroProject I have a del sol with a d15 at the moment and have a d16z6 that’s getting to getting ready to get dropped in. I’m not wanting to spend a fortune on a p28, so doing p06 to vtec conversion is what I’ll do
@@hamper116 yup then you're on the right track. but you'll need to get a p28 basemap burnt onto the sst chip, which we do that service as well if needed.
how to make ecu daigram sir t.y for the answer
you mean how to burn a basemap?
hello, nice video. can this be done in a p29 ecu? i cant find good info about it. also, buying those components at the local store should be fine? or they are something specific? (i have an eprom burner btw)
yea that ecu can be chipped. before buying the correct components, talk to the seller about the right parts for the conversion to your specific ecu. hope that helps.
My ecu has something on 1c16 and ic15 do i need to take those out c61 and q102 too?
The ecu I have there is a manual ecu. You don't have to remove those for that is what you see in an automatic ecu. if you did the auto to manual conversion, you have nothing to worry about.
is ic14 is for vtec if my ecu dont have vtec
yes. that section is for vtec. if its not there, you don't have vtec.
I need d16y3 alternative of p1k beacuse it not here
Are those chips reburnable ?
depending on what the seller is selling, yes. the one I bought is reburnable so the tuner can tune and reburn it.
Hey man I have a p75 I’m going for vtec on a b series do I need the capacitor for c60 ????
you need the complete vtec kit. yes
Hey bro! Will this work on p27 ecu running ZC sohc with vtec head?
I have never chipped a p27. But if the board looks exactly like the one in the video, then it should be the same and should work. If you need one, I do have a few still
@@JiroProject do you sell chipping and vtec conversion chip bro? I checked the ecu it has the same code as the one shown in the video
@@brandonyu98 I do sell kits and or can chip your ecu if needed. I also have ecus that are chipped with vtec that I am currently selling. If interested in any of these please email me at Jiro_project@hotmail.com
I have e6 ECU, can i upgrade it.too
never heard of that
How you doing I have a question does the p06 ecu needs to be a Manual to do this or could it be auto
No, whatever your car is, keep it that way. If you have an automatic vehicle, you don't need to do the auto to manual conversion. hope that helps
Johnny Muah Project no my car was automatic and was converted to 5 speed with in si tranny and ecu when this was performed also when from dual point to multi-point ...... mpfi modification now I want to throw a vtec head and people have told to look for a p28 ecu or a p06 am asking you this cause I have found a lot of p06 and p28 automatic
@@davidgodinez5380 OH, well then yea you can use an automatic as long as you convert it to manual. its pretty much a manual now. all you need is to add vtec which is what I showed here in this video. And of course if your car is an obd0 you will have to convert it to obd1. hope that helps.
Johnny Muah Project thank you so much
Is it true even after the vtec install the vtec wont work? Because it is not programmed to?
once vtec is install it will have vtec. but if you burn a ls b18a/b non vtec motor (for example) to your sst chip, then going by the reading of the chip it won't see vtec.
@@JiroProject gotcha...thanks for the reply...greatly appreciated
THANK YOU
Hey man the link for the parts isn’t valid anymore
yea sorry about that. They are actually no longer selling anymore, so I go through different people/companies. If you need anything message me under the description. Thanks.
In the p06 vtech what were the cables for the vtech ?
you mean sensors? in the video it shows what is needed for the vtec section.
I mean when the vetch p06 changes what would be the pin for solenoid vetch?
so at 0:29 that is the vtec parts you need. and at 3:09 is where you install it at. hope that helps
Can I do that on odb0 p01 D13B2?
No not with that ecu
@@JiroProject I send u an email answer if u can thanks bro
@@Audia62.4v6 never got one
Do u have any ecu for sale
as of right now i do. email me jiro_project@hotmail.com
@@JiroProject
Ok I’m gonna email u rn
are you selling ecu's ?
from time to time I do. just sold 5, but as for now I don't. check back in a few months
@@JiroProject ok let me know tho...
Good evening, a question please I have a civic 92 automatic box ecu 37820P06A50 engine D15b7 power 1.5L. I can change my ecu by 37820p06g50 without changing any component?
please urgent
thank you in advance
not 100% on what you're asking. but with that ecu, yes you can change it to manual, and also add vtec to it if needed. just do exactly what I did in the video.
@@JiroProject thank you so much
👍👍
P06-A01 can't find Q101. Any Ideas?
so left side middle. and at 5:17 I pointed out where its at. hope that helps
Couldnt find the part?
@@DJV94022 Yes I did. In eBay. All works well. Running CobraRTP. Got some In stock if needed.
My ecu is po6, may engine is d15b, can a po6 chipped with po8? Please help
yes it can. Once an ecu is chipped you will then be able to tune and burn the chip to your car.
Thanks bro, so it will run like a po8 ? As in, same same?
@@Tokis10 yes, as long as the basemap chipped as a p08
Tnx master