How To Chip Honda Obd1 P28 Ecu. Auto To Manual Ecu Conversion
ฝัง
- เผยแพร่เมื่อ 25 ก.พ. 2018
- In this video I show how I chip a honda p28 obd1 ecu hope you enjoy or learned a thing or 2
Check out my website
www.huntertuned.com
Follow me on the media
Facebook.com/HunterTuned
Instagram : huntertuned1
Snapchat : HunterTuned
Email with tuning or build inquires
HunterTuned@gmail.com - ยานยนต์และพาหนะ
man you have no idea how money your videos have saved me least I could do is like and comment
And watch all the ads completely. 😉
Great video Hunter !!!!!.... finally getting back into installing my D15b vtec installed in my civic. Now to find a P28 ecu. Glad your videos are still around for refreshers !!!! God bless you and yours and hope all is well .
I have seen a lot of your tutorials. Thanks for sharing. No one in Argentina share this stuff. You are a genius!
Great video, I'm learning my everyday about chips/tuning/converting. Thanks for the great info!
Thank you for this vid, it is a much-needed "go-to" type video!
Way better than anything on Hondata's site. They should sponsor you and use your videos for their own tutorials lol! Thanks dude.
Sweet video man hope your having a great day
Great video, very informative!👍
Great video! I was always so scare of touching an ecu, but after this vid...im confident o can do it myself now...but how to tune? :[
I spent 3 hours chipping my ECU because I didn't know how to properly desolder and didn't plan on doing it ever again but after watching this I may give it another shot.
jockobo the solder sucker is amazing
HunterTuned I had one but I didn't think to heat the solder from the other side lol
awesome video ,thanks !
Mint !!!!!!!!!!
the one handed tech...
Another great video Hunter how do you know what resistor to use on R54?
K C come with the kit
Have a question I have a chipped ecu jus like your doing to this one you installed instead of taking off the 28 pin can I just install The Hondata chip on top of the 28 pin and then jus install those 4 pins for the data logging or do I have to take the 28 out all together
I check,your video.is very,very good.im interesed in cheap my computer,my engine is a f23a1 vtec,the car is shif stick,or manual transmission.i need your opinion,your help.let me know what do you think
Yeah Buddy...!!!
what did you use for jumper wire? piece of paper clip?
ECU 101 !!! #HUNTERBOIZ
Hello from Turkey!cI watched your video and liked it
I have a 1.4 civic with engine code D14A4. The previous owner changed the transmission to manual. I am getting an a/t error. I have p3y-g51 ecu. Will the same steps work for me? OBD-1 ECU
Thank you for your help!
Nice. Ever use the quick release eprom holders with the locking arm? That’s what I used on the one I did. Just flip the arm and the chip falls right out with no prying. 👍🏻
Bad Luck Garage yes this actually has that style socket. Goes into the socket that’s soldered into the ecu!
Shit brother I didn’t even notice! 😜
Bad Luck Garage I don’t think I actually showed it on camera
Well that might explain why I missed it. For a second I was thinking I was one of “those guys” that I’m always bitching about. 😂
Hey do I really need to put a new resistor for the s300 chip into a p28
why do you change the c14 capacitor and where can you buy one
Do you sell a chipped ECU for a 94 Accord EX Automatic? In by chipping it what would it release HP wise? I'm not looking for a lot of gain's only to make it a little quicker
So I just found out I have an automatic ecu . Probably why I'm getting a fuel cut while driving. Thanks
Question. Do you think an auto p28 would work on an auto d16y8? Found one for cheap and wanna make my car tunable without having to swap it😅
If i sent you a nice shipment of ecu's would you cut a deal to put together a kpro set up for a d17? If so let me know. Thanks bud
i could probably pick you up an ecu at the junkyard if you want to pay for it and the shipping
Do you have to have data logging when chipping ecu
I got p28on my d16z6 automatic i change transmission to s20 I got check engine light because the automatic solenoid socket I take out the solenoid only and put back on my conector soo no more check engine but now I going to swap engine to b18c1 vtec gsr 5 speed , wht is you recommend me or advice, thx.
hey man been watching and learning a lot from your videos
I'm looking for some help and youre a Honda wizard so maybe you can answer this
I had a knocking y8 pulled it out (harness is fuckin hackjob)
found a d16z6 for 300$ I heard it run and pick it up Monday
if I get the harness off it it will be auto and a auto ecu
if I can should I get a manual harness and ecu>?
also I'm planning to use my y8 tranny
will any of this even work ?
How hot does the iron needs to be???
I have a p28 and a P06. Im running p28 on a b7 but it aint chipped. I need it chipped
Hey Hunter I have like 6 stock Ecu's let me know if you needs some. Good contents!
dogtag714 I do need some Email me please
HunterTuned@gmail.com
I need one
hello , can i put a on-off botton on J8, and run the car whit 2 Maps???
let me ask you hunter. i have a p28 ehich is already socket and chipped. I want to buy hondata s300 only, is possible to modify again to install this? need female adapter instead of male like socket
hi bro. how about the ecu p2m automatic convert to manual its is possible bro.
How much for the service
Can that ecu work in a 2002 honda civic
how about automatic b20b can use manual transmission
I just got a stock 92 cx in September
I messed up the ecu messing around with something i shouldnt have
Bought another p05 of facebook
It came socketed and chipped with an sst chip
Theres other stuff in there too
Question: my car runs fine but the cel stays on and my shift light is going bonkers
I contacted the dude i got it off and he swears theres nothing on the chip...
Will this damage my car in anyway
Should i do the paper clip trick or something?
Thanks in advance
can you chip my 93 honda del sol automatic ecu?
help..!!i did rechip on P30 ECU..but vtec wont engage?what did i miss?
Hey witch is the priming number
Hey man I need some help and was wondering if you could get in touch
Vtec conversation?
hey dude im looking to chip my manual p28, what chip should i get?
Send it to Jason waters
Hunter can this be done with a p06 also? Or strictly p28
quinton boffy yes po6 as well just won’t have vtec without converting it
@@HunterTuned CAN U CONVERT A PO6 TO A P28 ?
@@stevenaldridge8633 yes
My first P28, mint. I have done two recently that I burned the solder right out of the board and fooked myself. This last time, I bought one that was already socketed and it came shot. The fuel pump wouldn't run. Sent it back to dude, he sends it back, ran mint for a week, then no fuel pump again. I bought another one and sent dude back a dog turd in a box.
That sumbitch said that it was my fault and I did something to it. The ONLY thing I did was put my chip in it.
could have been using cheap knock off chip kits.
How much do you charge
Gerando Eley you can email me or check out my website links in description
U sell them
So much adv