А я и не знал, что реле топливного насоса от мотоцикла может выдавать ток высокого напряжения для свечи. А приварить свечу вместо того чтобы нарезать для нее резьбу это вообще топ. Я на своем мотоцикле также сделаю 😆
If you watch, the rotation of the crankshaft opens the exhaust valve first, then rolls over and opens the intake as the exhaust closes. Simple and ingenious. This is actually a two stroke design, not four stroke, as the two valves act like reed valves would. It is still cool. Wouldn't last long without oiling, but a compressor was never designed to work like an engine, so can't have it all ways at once, lol. Slick work there King Homemade.
Intake and exhaust valves open at the same time, no Venturi tube, no sign of an exhaust fume, no big flywheel to aid in a compression stroke and the engine goes full speed with a nudge from the handheld drill. Obviously fake
@@rizkyyoggi4020 Yeah it's fake but about the piston rings, some small engines/compressors don't have piston rings. I had a few RC car/plane nitro engines with no rings whatsoever and they had REALLY good compression, so much that in some cases we used shims between the head and the cylinder to lower the compression a bit so we could run a lower % nitro fuel without having knocking issues.
1.- las válvulas abren prácticamente al mismo tiempo 2.- no hay tiempo de compresión 3.- no hay humo ni explosiones visibles 4.- no hay flujo de combustible cor la manguera transparente 5.- no hay ningún tipo de movimiento en el combustible ( eso no succiona nada) 6.- y el carburador ??? 7.- creo que es muuuy falso 8.- como enciendes una bujía solo con un CDI? Sin usar una bobina?
1 fire for 2round of center shaft In other words Inlet and exhaust valves operated 1 time when rotor rotates 2 times timing gear ⚙️needed This is one type of compressor but not 4 stroke engine
well many things to say. First you can't get high voltage for spark from a CDI you need high voltage coil The inlet port is directly on a liquid (wich look like water ) but the hose is empty This engine is probably 3.5 or 4cc but sound like a way bigger No smoke coming out the exhaust,
Que bom que ninguém aqui é engenheiro pq esse negócio não é 4 tempos em nenhum lugar do mundo. As 2 "válvulas" abrem ao msm tempo e a cada 360° do motor.
I have a challenge for you brother. Make a hydrogen fuel cell (easy) make the motor run on hydrogen and produce electricity, then take some of the electricity created to power the hydrogen fuel cell (around 12v) and the rest of the electricity created is disposable. If you can do this you have created a Zero Point Energy Device, a water powered electricity generator 😁 Do you accept my challenge brother? I think you will do it easily. For your hydrogen fuel cell use two stainless steel food whisks and put a stainless steel scouring pad inside, very efficient 👍🏼✌😊🙏
Umh... Intake and exhaust valves close and open at the same time.. No timing between the sound( that obviously is not coming from a fridge compressor) and the rotation of camshaft( if we can call a point of welding a camshaft)..... Ahahah I'm laughing like crazy from all those bullshits😂😂😂😂😂.. At the end this is a tutorial on how to waste your time for nothing 😂
100% faqe engine , because intake and exhaust valve open and close as same time , when four stroke engine's principal is when piston, come from top intake valve should open and when piston compressed the air both valve should be close and when piston complete it's power stroke , exhaust valve should be open , that' simple rools of four stroke engine, this engine is operated by drill machine , because it has no carburettor setup
Qualified diesel mechanic here, I can see why people think this fake, although he did fulfill all the criteria need it for an engine to run. The valves is questionable but workable for this type of application, the fact that he starts with a drill is understandable because how else do you want to turn it to get it started, as for a flywheel that big mass on one side of the motor which used to be the electric motor while that is a very big mass assisting with the motor, and the fact that you immediately revs up high well it has no carburetor it just sucks in fuel Burns it and spits it out. In conclusion it is possible that something like this would work but it would have zero actual usable power unless you put a bit more effort into designing it. So very much plausible. Actually do have an old fridge motor.....I'm curious now......
Greatly done!, you can even make a hybrid engine out of this, it already comes with the coil to be the generator, you will have to find just an electric engine and some batteries to make one.
This just gives me more ideas on a gas powered refrigeration compressor. 5cc 2 stoke would probably do the trick. Make it run at really low RPMs and it should both be cool&quiet and sip gas.
Wow this is so fake like all mechanics know that the crank shaft spins 2 times faster than the cam shaft this literally uses the crank shaft for the cam shaft then where's the compression and power stroke the intake and exaust valves literally opens both valves at the same time in every up stroke and how is it getting air to create the compression that it doesn't have🤔its literally the direct fuel line connecting to the intake on top of that how is it getting any lubrication where does the oil go you can literally see that is was not even running there was not the littlest cloud of white smoke im sorry for everyone who even tried this and how is fuel even so clear what is that alcohol fuel
Впечатляет. Жаль, что нет разъяснений. А хотелось бы. Принцип, устройство, этапы, последовательность, информация о создаваемых и применяемых деталях и технических решениях.
Это фейковое видео. Мопедное зажигание не работает с датчиками холла, да и вместо датчика он припаял конденсатор, ГРМ вообще ору, одновременно впуск и выпуск открываются в конце 1 оборота, ну и до кучи, где пузыри в банке с бензином при запуске, ведь мотор потребляет воздух пр работе.
Nice effort. So many things wrong with this. First how do your rockers get lube? Second how do you change the spark plug? The plug is welded! Right? I could go on..., not gonna. Well, have seen a lot of vids over the years of people doing this with much more thought. Anyway keep plugging away.
This is clearly fake... He is using that 12V battery to juice that eletrical motor... That is not running on gas You can tell it just by the hose alone... The fuel is standing still and only being shaken by the DC motor, which became unbalanced because of all the stuff he just welded. You can see the fuel is not being sucked in. Also where is the exhaust? That "engine" has no fuel control whatsoever, no carburator, NOTHING, and still burns fuel CLEANLY like it had a perfect stoichiometric misture of air-fuel? XD He just added some sound effects on top, while the engine is being moved by a DC motor.
Sorry, but this is Fake. 1. it would not sund like a lawnmower but like a toy airplane 2. There is no valve timing because both valves open at the same time (barly I might add) 3. It would need air fuel mixture to run not pure fuel (that te engine did not even suck in by the way, to prove the non compression claim.) I like videos like that but this is disappointing.
Sangat cocok menurutku Asalkan bisa mengatur antara putaran jarak antara roda/arah piston maju/mundur/antara/tutup buka udara/tutup buka pembakaran api yg memecah sehingga piston terdorong
Честно говоря, я 15 минут пытался понять, какого хрена он вообще работает, поскольку тут нет ни соотношения скорости грм и кшм 1:2, ни топливно-воздушной смеси. А потом зашел в комменты.
Поставил комутатор от мопеда,сам комутатор высокое напряжение не выдаёт а выдаёт только импульсы для высоковольтной катушки,без высоковольтной катушки искры на свече не будет
The carburator and ignition are the only things on this engine that could theoretically work. both valves open every stroke around TDC, so no compression stroke, no power stroke and depending on how restrictive exhaust and intake is no intake or exhaust either. You can see it in the video, where the lines on the carb are connected the wrong way round. On the proper thing air is sucked in below the fuel, bubbles up and tales on fuel, then leaves through the top pipe, no bubbles = no fuel actually entering the engine. The sound is edited in afterwards and some mechanism to shake the engine is probably hidden behind it.
@@user-si5fm8ql3c He was just spinning it with the drill the whole time. In the shot when he takes the drill away it was just the momentum allowing it to spin. Besides the impossible valve arrangement, here was no carburetor, just a tube going into a cup of what appears to be water. The ignition couldn't work either because there are no breaker points to fire the coil. This guy just puts junk together and makes it move in a somewhat familiar way to make people who don't understand think he's a genius.
@@haunter_1845 The tube going into the water can actually work, well not like shown here, theres another video of a engine very similar to this that actually works, though that one had a fresh air bypass, had the tubes the correct way round and was filled with gasoline. Didn't even catch that he didn't finish the ignition, just stuck the hall sensor on and called it a day. Overall, a pretty shitty fake
А как это? Заварил свечку, сделал клапана из болтиков с люфтом, про грм промолчу,отсутствие простейшего карбюратора, а то что он жрёт чистое топливо, это вообще шедевр
It’s not even working, those valves are not opening enough to allow the air to enter, the spring tension is not enough to keep the a/f mixture in the cylinder
It depends on the engine I guess and whether or not you want to retard or advance the timing to keep the intake or exhaust valve open longer, but in general they are close to 90° apart I do believe but they are on a 2:1 ratio with the crankshaft
It is strange that the valve cam is being driven by the main motor shaft while in four-stroke engine it is by a secondary shaft that rotates half the rotational speed.
*I make free Solar Stove* th-cam.com/video/B2OSoyJlueQ/w-d-xo.htmlsi=S2QqahbFTV9_EkaR
А я и не знал, что реле топливного насоса от мотоцикла может выдавать ток высокого напряжения для свечи. А приварить свечу вместо того чтобы нарезать для нее резьбу это вообще топ. Я на своем мотоцикле также сделаю 😆
какое реле топливного насоса? это коммутатор. а вот свеча да, это позор
@@m1sst4k37 этот способ реал работает?
@@ПозватПозвать в видео? не
двигатель из холодильника компрессора можно сделать, но не как в видео
@@m1sst4k37 а как по другому
@@m1sst4k37ну
От клапанов я вообще ржал до икоты 😂. И от ГРМ тоже 😂 Хочется услышать мнение Доктора Дью.
Я тоже вахуях
Там даже нету топливо в трубках, че за хуита
Тупо наебалдаже дыма нет тока непонятно как оно крутится
@@gold4808 скорее всего там эфир. А он и без клапанов работать сможет. Как авиа модельные двигатели типа мк...компрессионного типа.
Доктор дью повторит эту самоделку,ещё и проверит😏
If you watch, the rotation of the crankshaft opens the exhaust valve first, then rolls over and opens the intake as the exhaust closes. Simple and ingenious. This is actually a two stroke design, not four stroke, as the two valves act like reed valves would. It is still cool. Wouldn't last long without oiling, but a compressor was never designed to work like an engine, so can't have it all ways at once, lol. Slick work there King Homemade.
Your missing the point that its homemade
Fake engine, look at the vapor carburetor he put it backward how it will run? 😆😆
Carefully
@@hiiiiii5280 you are missing the point too that it's fake
@@leorenzoduce2502 well sorry if i came on too hard, did not mean it that way but who said it was real
Intake and exhaust valves open at the same time, no Venturi tube, no sign of an exhaust fume, no big flywheel to aid in a compression stroke and the engine goes full speed with a nudge from the handheld drill. Obviously fake
This is magic There are no ratio between crankshaft and camshaft
Very fake
I agree. It cant take in fuel.
No ventury carburator and intake and exhause open at same time .one more no piston ring you sure ? Compression in silinder did'n work .... fake
@@rizkyyoggi4020 Yeah it's fake but about the piston rings, some small engines/compressors don't have piston rings. I had a few RC car/plane nitro engines with no rings whatsoever and they had REALLY good compression, so much that in some cases we used shims between the head and the cylinder to lower the compression a bit so we could run a lower % nitro fuel without having knocking issues.
1.- las válvulas abren prácticamente al mismo tiempo
2.- no hay tiempo de compresión
3.- no hay humo ni explosiones visibles
4.- no hay flujo de combustible cor la manguera transparente
5.- no hay ningún tipo de movimiento en el combustible ( eso no succiona nada)
6.- y el carburador ???
7.- creo que es muuuy falso
8.- como enciendes una bujía solo con un CDI? Sin usar una bobina?
Falou tudo ermaño
you are totally correct, i have had the same Thouths
Ok giong nhu ban
@jorgemdk5608 odeio quando pessoas como você tem toda a razão do mundo! os mecânicos devem ter morrido só de olhar 😐
Es el verdadero "funciona con la ingenuidad"
1 fire for 2round of center shaft
In other words
Inlet and exhaust valves operated 1 time when rotor rotates 2 times timing gear ⚙️needed
This is one type of compressor but not 4 stroke engine
they think we r fool!🤣🤣
That's right👍, not 4 stroke
Maybe he meant to say it’s a 400 stroke engine?
Хотябы шланги правильно поставил бы чтоб все поверели
И катушку
Го спамить ссылку этого видео ДОКТОРУ ДЬЮ
Da
ну да хотя бы было топливо в шлонги я бы точно поверил
@@ordinaryperson._. Конечно, надо что бы он проверил это всё
Engineers: dies from cringe
🤣🤣🤣🤣
Same :))
He didn’t tap anything oh my lord please stop this man he’s blasphemous
Never seen a 4 stroke that doesn't need timed valves, doesn't need oil, or properly timed ignition system.
yes, fake
My dude is turning the engine like it has no compression
Bro learned value working principle in macdonalds washroom😂
well many things to say.
First you can't get high voltage for spark from a CDI you need high voltage coil
The inlet port is directly on a liquid (wich look like water ) but the hose is empty
This engine is probably 3.5 or 4cc but sound like a way bigger
No smoke coming out the exhaust,
CDI works at battery
Que bom que ninguém aqui é engenheiro pq esse negócio não é 4 tempos em nenhum lugar do mundo. As 2 "válvulas" abrem ao msm tempo e a cada 360° do motor.
para mim é falso ,há muita coisa errada na construção.
De hecho creo que tienes razón hay muchas fallas
@@migfer7 mas rapaz essa mentiras é só pra gente se divertir kkkk
E o combustível esta agindo contra as leis da gravidade. Kkkk
Nē kkk
It’s crazy how it can go so fast it appears to be going in slow motion. Great Job.
Wouldn't it have been better to drill/tap the plug hole rather just weld the plug in (which also will give you a small compression leak I would bet)?
I'm sure that was to original plan put he drilled it to big 😂😂
The Video is fake
I like your videos, I'm from Vietnam
My humor is so broken, im deadass laughing At that sound 1:02
We've all been there.
I have a challenge for you brother.
Make a hydrogen fuel cell (easy) make the motor run on hydrogen and produce electricity, then take some of the electricity created to power the hydrogen fuel cell (around 12v) and the rest of the electricity created is disposable.
If you can do this you have created a Zero Point Energy Device, a water powered electricity generator 😁
Do you accept my challenge brother?
I think you will do it easily.
For your hydrogen fuel cell use two stainless steel food whisks and put a stainless steel scouring pad inside, very efficient 👍🏼✌😊🙏
Baler chele
making a fool🤣
it takes more energy to break a water molecule into hydrogen than you get out of burning hydrogen
Just make a perpetual motion machine, bro
Amazingg
Good idea"and creativiti 👍👍👍👍 i'froms indonesian😁😁😁😁
Umh... Intake and exhaust valves close and open at the same time.. No timing between the sound( that obviously is not coming from a fridge compressor) and the rotation of camshaft( if we can call a point of welding a camshaft)..... Ahahah I'm laughing like crazy from all those bullshits😂😂😂😂😂.. At the end this is a tutorial on how to waste your time for nothing 😂
Yes
Op?lkjhg!
?!mljhjhjuuzztgrvftbzhg!!zi!!?mn😬😠
@@jakovprtenjaca6552 what does it mean?
Its fake
The drill and engine sounds come straight from the Let’s Make Something video
Hahahaha i knew him hes my fav youtuber
Definitely is! LOL th-cam.com/video/Bk4RND5AbRc/w-d-xo.html Good thing I was not the only one to spot it.
He was the first one who made that engine i think🤔🤔🤔
this guy is something else. why would you not thread the holes for the spark plug but freaking welds it in?
100% faqe engine , because intake and exhaust valve open and close as same time , when four stroke engine's principal is when piston, come from top intake valve should open and when piston compressed the air both valve should be close and when piston complete it's power stroke , exhaust valve should be open , that' simple rools of four stroke engine, this engine is operated by drill machine , because it has no carburettor setup
Qualified diesel mechanic here, I can see why people think this fake, although he did fulfill all the criteria need it for an engine to run. The valves is questionable but workable for this type of application, the fact that he starts with a drill is understandable because how else do you want to turn it to get it started, as for a flywheel that big mass on one side of the motor which used to be the electric motor while that is a very big mass assisting with the motor, and the fact that you immediately revs up high well it has no carburetor it just sucks in fuel Burns it and spits it out. In conclusion it is possible that something like this would work but it would have zero actual usable power unless you put a bit more effort into designing it. So very much plausible. Actually do have an old fridge motor.....I'm curious now......
Me gusto mucho tu trabajo, pero pudiste haber calculado el diámetro para hacerle roscado con un machuelo donde va la bujia. Saludos
Минусуй видос если от доктора!😂
Сам понял что сказал?
@@ЧунгукЧунгук да
@@fanatikfanatikoff тогда перефразируй, а то никто кроме тебя не понял
@@ЧунгукЧунгук кто понимает о чем речь тот понял. Остальные игнорируйте.
Я понял. Видос минусуем!))
11:48The pressure movement is a new idea 😍👌🏼
good luck bro♥️♥️🇸🇦
🇮🇶
@@GN2T 🌚♥️♥️♥️♥️ منورين الحلوين
@@m501-7 حياتي انته
Greatly done!, you can even make a hybrid engine out of this, it already comes with the coil to be the generator, you will have to find just an electric engine and some batteries to make one.
The vid is fake
@@clocknack Thinking about it the lack of smoke and simultaneous activation of both intake and exhaust valves, it's fake
This just gives me more ideas on a gas powered refrigeration compressor.
5cc 2 stoke would probably do the trick. Make it run at really low RPMs and it should both be cool&quiet and sip gas.
Выглядит очень надежно!!!)))
Tutorial seperti ini penting untuk bangsa pemula yg mencari ilmu asalkan jangan lepas dr hukum2 tehnik tutorial itu sendiri lanjut
Tapi byk jok nya 😭😭😭
First time I've seen anyone tig weld and walk the cup backwards ! LMAO 😜🤪
Hello brother, like your video.
Thank you. if this video is helful, please share it
Why not dear bro, big respect and big love. Keep continue
It’s built like a four stroke but it’s actually a two one…but very very good!
😂😂😂😂😂😂😂😂😂😂😂😂😂😂 I went to moon by my battery powered tricycle ........
Клапана вообще отпад😂🎉
That's a new one , now run it on wood stove smoke . And a little vegetable oil for lube .see were I'm going .Very good !
Jio fridge se jugar bitha diya 🥶jio India
Mais verdadeiro que nota de 3 real kkkkkkkk
Keren kayaknya yak anak teknik mesin tugas akhir nya bikin ginian 😁
very good 👍
thank you
Wow this is so fake like all mechanics know that the crank shaft spins 2 times faster than the cam shaft this literally uses the crank shaft for the cam shaft then where's the compression and power stroke the intake and exaust valves literally opens both valves at the same time in every up stroke and how is it getting air to create the compression that it doesn't have🤔its literally the direct fuel line connecting to the intake on top of that how is it getting any lubrication where does the oil go you can literally see that is was not even running there was not the littlest cloud of white smoke im sorry for everyone who even tried this and how is fuel even so clear what is that alcohol fuel
உண்மை. டைமிங் வீல் 2/1 என்ற வீதத்தில் சுற்றவேண்டும் இல்லை என்றால் ஓடாது
2 stroke engines? Idk i haven't seen entire vid yet.
And he make 1 more mistake. piston metal ring ,😆😆😆
@@soloclutch1172 did it even have a ring 🤣🤣
@@After_Tech_Industries he tried to make a 4 stroke
Впечатляет.
Жаль, что нет разъяснений. А хотелось бы. Принцип, устройство, этапы, последовательность, информация о создаваемых и применяемых деталях и технических решениях.
Wouldn’t you want the data sheets too for all the components?
Это фейковое видео.
Мопедное зажигание не работает с датчиками холла, да и вместо датчика он припаял конденсатор, ГРМ вообще ору, одновременно впуск и выпуск открываются в конце 1 оборота, ну и до кучи, где пузыри в банке с бензином при запуске, ведь мотор потребляет воздух пр работе.
Nice effort. So many things wrong with this. First how do your rockers get lube? Second how do you change the spark plug? The plug is welded! Right? I could go on..., not gonna. Well, have seen a lot of vids over the years of people doing this with much more thought. Anyway keep plugging away.
This is clearly fake... He is using that 12V battery to juice that eletrical motor... That is not running on gas
You can tell it just by the hose alone... The fuel is standing still and only being shaken by the DC motor, which became unbalanced because of all the stuff he just welded. You can see the fuel is not being sucked in.
Also where is the exhaust? That "engine" has no fuel control whatsoever, no carburator, NOTHING, and still burns fuel CLEANLY like it had a perfect stoichiometric misture of air-fuel? XD
He just added some sound effects on top, while the engine is being moved by a DC motor.
Wow! I love your easy solution to the valve cams… brilliant!
I'm still trying to get how does it works.
@@asdasdasdasd8884 He doesn't use a cam to control the valve close/open but he uses a coil crank
This man can put GM put of business
Sorry, but this is Fake.
1. it would not sund like a lawnmower but like a toy airplane
2. There is no valve timing because both valves open at the same time (barly I might add)
3. It would need air fuel mixture to run not pure fuel (that te engine did not even suck in by the way, to prove the non compression claim.)
I like videos like that but this is disappointing.
انت وين لگيت هاي الكلاوات. 😂😂😂. Your work is fuls. The motor is not work by this way.
Sangat cocok menurutku Asalkan bisa mengatur antara putaran jarak antara roda/arah piston maju/mundur/antara/tutup buka udara/tutup buka pembakaran api yg memecah sehingga piston terdorong
Интересно 250 тысяч человек хоть подозревают что их разводят
Поч?
Edit: понял
Я верил пока не увидел перепутанные трубки топливной системы.
Честно говоря, я 15 минут пытался понять, какого хрена он вообще работает, поскольку тут нет ни соотношения скорости грм и кшм 1:2, ни топливно-воздушной смеси. А потом зашел в комменты.
спасибо, по ржал .Видео от Боливуд.🤣🤣🤣🤣
Он свечу приварил, пойду у себя на автомобиле также сделаю, чтоб не откручивались
Eccellente sei un mago 😽 ciaooooop
You should work at NASA.
Incredible working model. Well done
Свечу автору за фольшивое видео в одно место вставить нужно, быстрее будет вращаться
Very good 👍👍👍
Itu video sesat, pembodohan..., mas..., masa pada saat kompresi katup terbuka.
@@IbnuOfficial777 cara bikinnya aja yang salah kalo pinter bikin ya berhasil
3:00 what is this 😂😂😂😂
Поставил комутатор от мопеда,сам комутатор высокое напряжение не выдаёт а выдаёт только импульсы для высоковольтной катушки,без высоковольтной катушки искры на свече не будет
merci pour votre excellent travail
3:19 I gotta try this method of cutting metal!
This very very very good human creativity.....1000 👍
Какая игра боже оскар несите
Го спамить ссылку этого видео ДОКТОРУ ДЬЮ
Го спамить ссылку этого видео ДОКТОРУ ДЬЮ
Го
@@ordinaryperson._. я оставел ком в последнем видео
Soldar una bujía???🤔🤔🤔...somos tontos ???
Nice Carburator and Ignition. The fuel delivery doesn't even require a pump or gravity. How ingenious.
The carburator and ignition are the only things on this engine that could theoretically work.
both valves open every stroke around TDC, so no compression stroke, no power stroke and depending on how restrictive exhaust and intake is no intake or exhaust either.
You can see it in the video, where the lines on the carb are connected the wrong way round.
On the proper thing air is sucked in below the fuel, bubbles up and tales on fuel, then leaves through the top pipe, no bubbles = no fuel actually entering the engine.
The sound is edited in afterwards and some mechanism to shake the engine is probably hidden behind it.
@@user-si5fm8ql3c He was just spinning it with the drill the whole time. In the shot when he takes the drill away it was just the momentum allowing it to spin. Besides the impossible valve arrangement, here was no carburetor, just a tube going into a cup of what appears to be water. The ignition couldn't work either because there are no breaker points to fire the coil. This guy just puts junk together and makes it move in a somewhat familiar way to make people who don't understand think he's a genius.
@@haunter_1845 The tube going into the water can actually work, well not like shown here, theres another video of a engine very similar to this that actually works, though that one had a fresh air bypass, had the tubes the correct way round and was filled with gasoline.
Didn't even catch that he didn't finish the ignition, just stuck the hall sensor on and called it a day.
Overall, a pretty shitty fake
Beautifull work.... 🔥👍👍
I have a question... Where is the venturi effect that every carburators have?
This engine is fake
That carb is called vapor carburetor, it doesn't need venturi effect to work. But the engine was clearly fake, it doesn't have a timing gear or chain.
@@airsight2753 are u been dumb??
А как это? Заварил свечку, сделал клапана из болтиков с люфтом, про грм промолчу,отсутствие простейшего карбюратора, а то что он жрёт чистое топливо, это вообще шедевр
NEVER heat a magnet, if you heat a magnet specially that hot it will demagnetize
Nice video
thanks
Wow, love your creation.., where u r.... I am from Taiwan...
Кому тоже стало больно от того, что он свечу приварил?
От использования системы газораспределения?
Ну, как игрушка на полчаса, подойдет
You put the vapor carburetor backward LOL 😆😆.
Keren banh indonesia punya yg gini
0:45 Use protection
No 🗿🗿
nice oscillator..
Otomotiv sanayisi seni neden kesfetmemis cok yazik :)
3:50 Do you also use a grinder in bare feet and shorts?
What oil use.................?
Come on this is so fake, IT IS possibke to make engine out of compresor but this is not the way.
Where is fule
What about using heater plug instead of spark plug?
Как насчет работы на воде , у вас все заработает , кинокруты блять 😂😂😂😂😂
الله أكبر الحَمْدُ ِلله سبحان الله مرحبا
In what world does a capacitor serve as a sensor and in what planet does a CDI spark a spark plug without a high coil. Fake Fake Fake Fake Fake
A magneto or a motor
Is mounted
All is fake
@@manuelarias5061 there is a battery mounted
you are fake
Whoa welding the plug in there,? I thought he was going to tap some threads to install the plug
This engine for how many cc we can say?would the bike be run with this engine?
Yes, you can run a jet with this
It’s not even working, those valves are not opening enough to allow the air to enter, the spring tension is not enough to keep the a/f mixture in the cylinder
Even if this thing did work how long would it last without a lubrication or cooling system ?????
Nice idea🤡🤗
Nice perfect
Thank you.
How do you timing between intake and exhaust camshafts?
It depends on the engine I guess and whether or not you want to retard or advance the timing to keep the intake or exhaust valve open longer, but in general they are close to 90° apart I do believe but they are on a 2:1 ratio with the crankshaft
Amazing work
No exhaust? No smoke? 😂 nice idea though, common click bait on yt
Disculpe mi ignorancia, pero no idea tengo lo que hiciste. ..saludo desde Paraguay, América del sur 🙋
It is strange that the valve cam is being driven by the main motor shaft while in four-stroke engine it is by a secondary shaft that rotates half the rotational speed.
bloody brilliant. i particularly like the camshaft linkage. v clever.
Every part is commendable
Fake...
@@IbnuOfficial777 ik right y are we the only 2 people who can see this it is literally mechanically not possible
What kind of fuel is in the tank? (gasoline?)
Боже 🤦♂️ как он болгаркой работает? Как у него ещё пальцы все на месте?
Го спамить ссылку этого видео ДОКТОРУ ДЬЮ
This is a two stroke engine with mechanical reeds, not a four stroke engine.
Absolutely awesome
Feels like fake one
High voltage without ignition coil 😜