@hofsplace how does it work to switch from one car to another? Any action needed, or will the Receiver connect to the first Transmitter that gets turned on?
The fail save normally sits in the receiver. Almost all modern TX/RX has it build in. You can test it yourself, just put the car on a stand, give a little throttle, and switch the transmitter off
Thanks for you recommendation. I've ordered one. Ive also bought some good RC stuff from Aliexpress and most is all really good quality.
Nice 👍🏻
I bought a couple, based on your semi recommendation, and find them much easier to use than the dumbos I had been using
Hi, indeed they do. The display is a revelation
I bought 18650 battery but am afraid to install. It fits so snug, I don’t know if it will come out to recharge. Any tips?
@@peterbuller3572 sorry, no tips. I had a 18650 from my torch, that didn't fit as well
Hello! I connected motor fan to 5ch. But it works only when I pushing on the 5ch button. How fix it? Thanks
As far as I know, you cannot change the buttons from inching to locking
Is 4 wheel steering possible ?
Nose como conectarlo para que encienda, podría decirmelo
What doesn't turn on? The receiver? Your ESC should power the receiver
Very good for the price! What about the range ?
I didn't check full range, but it seems ok so far
The USB-C connector is for both charging the 18650 battery and also to update the firmware if/when available.
Is 4WS possible ?
Yes, but you have to use a Y on CH1 or use the three position switch. But with the 3 position switch its full left, center full right, not ideal.
Cómo puedo verlo es español?
There should be a button in the top right corner with 'CC', this should be the translator
🆒🎦👌👍👋🍀
Does it work with other brand receivers?
Not that I know off
how to fail safe receiver ?please help power off, but motor stil running
Then you should find a separate fail safe. I think this one; s.click.aliexpress.com/e/_EHiw1oj
that's really clear tutorial, thanks a lot men! love it
You're welcome
ใส่วิน ch5 ได้หรือไม่
Sorry I don't fully understand the question
Can you bind 2 receivers to same transmitter (not to be used in same time but just to be able to use same transmitter with 2 cars)?
Yes you can, you can save up to 10 cars
@hofsplace how does it work to switch from one car to another? Any action needed, or will the Receiver connect to the first Transmitter that gets turned on?
@@emiliandobroaica4646 there is no different memory function for each car, you need to bind it each time on the RX,
Thanks for the clarification!
Better than Dumborc x6pm-350?
I prefer the DumboRC. It has way more functions and is easier to adjust.
Thanks you appreciated
Good video la funzione fal safe e compresa?
The fail save normally sits in the receiver.
Almost all modern TX/RX has it build in. You can test it yourself, just put the car on a stand, give a little throttle, and switch the transmitter off
Quindi è già inclusa non è come ad esempio i flysky che devi impostarlo manualmente
Cuantos metros de alcance tiene?
I didn't test the range, sorry