Aspen Plus: Designing Heat Exchanger by the Tool EDR Exchanger Feasibility

In this video we use the Tool EDR Exchanger Feasibility to design a heat exchanger.
10000 kg/h of an equimolar binary mixture of ethanol and acetic acid is to be heated from 20 °C to 60 °C. Hot water will be used as heat source medium. The temperature of the water is 80 °C. The temperature difference between the cold and hot medium in the heat exchanger must not fall below 10 °C. The pressure loss must not exceed 0.1 bar on both the cold medium side and the hot medium side.
For a small donation you can download the Aspen Plus file from the following link:
www.paypal.com...
All Aspen simulations in this channel can be downloaded for a donation. After completing the donation, you will be redirected to the download page:
www.paypal.com...
[e-mail]

[@Dinotaeng]

Thank you always! then after finished the 'accept design' in EDR, do we need to change calculation mode "Design" to "Raing"?

[@omareljisr1220]

@KGengineeringsolutions Hello, iam working on my project which is sludge gas conversion to energy by gasification, is there any simulation for that? Thank you in advance

[@omareljisr1220]

In aspen plus of course

[@kgengineeringsolutions]

@@omareljisr1220 Hello, unfortunately I have not yet simulated a case with sewage sludge. I know that the pyrolysis of sewage sludge works technically, but the gasification is not certain