ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
WLtoys 104001 First Run FAIL | 2s Speed Test | 2WD/RWD Conversion | Broken Bevel Gear
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2024
- This is my first run of WLtoys' latest offerring - the 104001 1/10th scale 4WD offroad buggy! After a short bash one of the bevel gears broke and I am now waiting for a replacement gear from Makerfire, covered under waranty. In the end I removed the defective part and now the car is running fine in RWD mode.
Thank you Makerfire for your fantastic customer service and after-sales support!
First Look video: • WLtoys 104001 Unboxing...
I hope you enjoy watching this video! Please hit LIKE, and please subscribe to my channel and hit the notification bell so that you will not miss out on my upcoming videos.
Thank you so much for watching!
Follow us on Facebook: / mickorc
===========
Affiliate Links
===========
WLTOYS 104001
===================
Makerfire: shop.makerfire.com/products/w...
7% Discount code: MickoRC
Banggood: www.banggood.com/custlink/DmG...
10% Discount code: BG10OFFAFF
SKYRC GSM-015 GNSS GPS Speed Meter
==================================
Banggood: www.banggood.com/custlink/KDD...
10% Discount code: BG10OFFAFF
WLTOYS 124018
=============
Makerfire: shop.makerfire.com/products/w...
7% Discount code: MickoRC
Banggood: www.banggood.com/custlink/KKm... 10%
Discount code: BG10OFFAFF
WLTOYS 124019
=============
Makerfire: shop.makerfire.com/products/w...
7% Discount code: MickoRC
Banggood: www.banggood.com/custlink/vvK...
10% Discount code: BG10OFFAFF
WLTOYS 144001
=============
Makerfire: shop.makerfire.com/products/w...
7% Discount code: MickoRC
Banggood: www.banggood.com/custlink/vvD...
10% Discount code: BG10OFFAFF
Music: www.bensound.com
#mickorc #wltoys #104001
***** NEW *****
WLtoys 144010 Brushless 1/14 Buggy
shop.makerfire.com/collections/new-arrival/products/wltoys-124018-brushless-rc-car?aff=246
FREE SHIPPING! and 5% OFF Discount code: MICKORC
***** NEW *****
WLtoys 124017 Brushless 1/12 Buggy
shop.makerfire.com/collections/new-arrival/products/wltoys-124019-brushless-rc-car?aff=246
FREE SHIPPING! and 5% OFF Discount code: MICKORC
***** NEW *****
WLtoys 124016 Brushless 1/12 Dessert Truck
shop.makerfire.com/collections/new-arrival/products/wltoys-124018-brushless-rc-car?aff=246
FREE SHIPPING! and 5% OFF Discount code: MICKORC
Grab your 104001 now from Makerfire: shop.makerfire.com/products/wltoys-104001-car?aff=246
5% Discount code: MickoRC
Making the most out of an unfortunate situation brother, great to see Makerfire has great customer service to replace the part that broke on this RC. I can see your diff definitely had more grease applied inside then both of mine did, the gasket on mine was dry and there was only some grease in the middle. WLtoys were slack for not properly greasing all the gears throughout in the factory as a lot of new owners now have shown this in facebook groups etc. Thanks for sharing Micko, at least you can mess around with it as a rear wheel drive until your parts arrive 👍🍻🇦🇺
Thanks brother! I finally got over it. Lol!
Yeah, I noticed others' diffs like yours had a lot less grease then mine. But yeah.. slacks buggers over there!
It's my first RWD car, haha.. It's a lot of fun too! cheers Dave 🍻🇦🇺
Hey Bro the Grand Master of Disaster 😂🥰🤜🏽🤛🏻
Love your VIDS very entertaining as allways 💪🏾😁
Thanks for sharing and very cool that it drives as rwd you made the best out of this situation 👌🏽😍
Have a nice week and stay safe bro ✌️🏽 😎 🏄🏽
LOL master of disaster.. love it! 🤣
Thanks for your kind words and continual support brother. Enjoy your day and stay safe! 😊
This is awesome. your video is amazing. SUBBED👍. Keeping Going
Thanks for watching bro! 😎👍
cool rc,bummer on the breakage,great video
Thanks for that bro!
Yeah.. sucks big time, didn't even bash it hard. ah well!
I think the upper front driveshaft together with bevel gear slams into drive gear when you jump because chassis is too flexible, I know there are braces to 3d print do you think that would help?
Or I could learn to control my landing properly to land flat on the ground.
But yeah I have since printed up a brace and installed it. Much less flex now. thanks
Do you know any upgrades for the bevel gears and the diffs at all?
Coll Video Bro.!
Thanks brother! Have a great weekend! 😎👍
how did you get the beval gear out? Mine is stuck?
Thanks for the video. I think it's just a quality control problem. Sometimes with wltoys, the parts are just bad quality. Sometimes you get lucky. I greased my diffs and bevel gears before running the car and the bevel gear going to the rear differential shredded it's teeth after only a few minutes of driving. No jumps or bashing of any kind.
Same here. Whatever metal they use to make the bevel gear seems very brittle and cheap. Anybody make a high quality one?
@@goodknight37 I ordered replacement on ebay and so far it is holding up, even with my new brushless motor.
Thanks for sharing this.. I will let my little brother watch this.
hehe thanks
Where did you get the ramp
Just shredded my bevel gear on the 3rd or 4th run. I was jumping it pretty hard though on some bmx jumps. My 124019 has been dead reliable so I'm assuming this is a unlucky break. New bevel gear is going to take a few weeks which is a bummer...
Mantap bossku... 👍👍👍😊
Where can i buy a bevel gear for wltoys 104001...
Where can i buy a bevel gear wltoys 104001
It did that because you're holding the throttle when the car lands. There is no buffer on these cars. I don't do that even on my cars that have a slipper clutch. Btw, those parts you looked up are based off of Vaterra Twin Hammers. One of the best rc cars made. Not sure why you would assume the year of production had anything to do with quality.
Hmm...ill have to find a way to install a slipper when I get the brushless setup I ordered... im planning on converting it pretty early...and it looks like a slipper might be mandatory.
Yeah, I decided not to preorder the car until I see all the issues it has. Concerning slipper, I'd suggest Tomley RC channel. He knows what he's talking about and he mentioned he'd do a comparison between this car and the LC model it's based on. If i remember correctly, he also mentioned trying to fit a slipper on this car.
Can u making tutorial to fix broken bevel gear without buying new one?
Good they took care of you 👍
Yeah... very nice of them. But probably will be the most economical shipping 😆
another tuber just plugged fan into other port on esc and fan stays on...you want fan on all the time when running anyway...... i think that was a bad cast part,but grease packedin that area will help also and in my opinion may have prevented that fail...
Nice video and thanks for your honest to goodness assessment. WLToys should change their labeling from RTR to ARTR. Well, at least their definition of 'almost ready to run' -- not that you need your own battery but you have to grease the diffs first before you run your RC. 😄
You're welcome bro. Thanks for that. I do like to share my first run experiences with my viewers so that we all learn from them
I believe it's wltoys' intention that it's RTR but they're being lazy and not greasing diffs. It's really getting annoyong. Hopefullly they watch YT videos and read our complaints and take action. Cheers brother!
Arouch bro. Is there a bvel available now?
Same gear as the K949 so there should be
What a bummer bro, that's kind of why I didn't buy that truggy because it's just cheap cheap parts. Anyway good luck on getting quality parts brother and two wheel drives not so bad.
Cheers brother! Yeah it's my first time with a 2WD and I am quite enjoying it 😀
Where do you buy more of those plastic 12mm wheels nuts, I did a search on banggood and could not find a match. 2 of mine are stuck inside the wheels and I would have to damage it to remove them. Thanks
I get mine from aliexpress or ebay. They're metal too. Make sure to get ones with a 5mm hole. Otherwise you can get ones with a smaller hole and then make the hole bigger with a 5mm drill bit. That's what I did with spares I have originally intended for my 144001 and 124018/019.
For example ...
US $2.99 20%OFF | YUKALA 4mm/5mm/6mm metal CNC wheels nut /hex hub for 1:10 RC car 12mm aluminum wheel hex driver adaptors Multicolored
a.aliexpress.com/_mLR7DEN
@@MickoRC I actually meant 12mm hex for the 124019, not the new model. I bought a set of aluminum from eBay but the little pin did not fit the stock axle... the pin was too small and loose.
@@i4nic256 oh ok. they never specify the pin size so it's hit or miss. I always end up cutting pieces from a nail. Good luck bro. Have a good day 😎👍
@@MickoRC Good idea with the nail trick, I’ll try using that. Thanks you
Is the fs racing 53632 is best compeaerd to this isnt
yep
Big like
I have the same problem after first run
Trashed my front bevel gear on only the 2nd time I took the car out, and then the rear on lost its teeth after the 4th or 5th outing. Perhaps very poor quality gears with absolutley no grease.
Replaced them (with part no K949-43) and all's good...and it seems a LOT quieter too, or perhaps that's just the grease smoothign things up. Fun car, though!
how did you get the beval gear out? Mine is stuck?
How have the new one's held up? are they stronger then the ones that came with the car?
Great video. Sad to know the car is so fragile..
Thanks for dropping by and watching.
I guess if you drive it carefully you should have no issues. Some people tell me it's because I'm holding the throttle while landing. I usually do release when landing, but this car seemed to nosedive often therefore I was attempting to prevent nosedives. Oh well! Hopefully it's just my car or just me, for the sake of other owners. 😀
🤯brushed motor and striped the bevel gear? I striped mine on the rear after brushless conversion and installation of traxxas slash wheels. I guess I've got what I've paid for
Hey have you found a decent replacement/hop up version of the bevel gear im homing to find one i just broke mine im gunna be installing an lc10b slip clutch gear from lcracing but am on the market for a bevel gear thats a bit tougher maybe steel
Nah bro. Just using a standard replacement. I hope you find a better quality one.
how did you get the beval gear out? Mine is stuck?
@@fastfreddy7111 have you removed the metal cover and plastic cover? It's around 9 screws to remove both plates.
@@2psnopod Yes I did. it seems to be stuck. do you still run this car? is it still working?
@@fastfreddy7111 yes I do I'd have to say if both covers are off and you still can't get it out you might have to pull a diff out to remove the drive shift to reduce the amount of pressure on either side it's around 6 reg screws then two Allen nub screws on wither side of the drive shift watch your bevel gear when reinstalling to make sure you it's not binding or flat out missing when you put it back together but with the driveshaft uninstalled it should free it up a bit or maybe go to the bottom and losses the center gear mounts see if that frees it up it should just pull strait up and out tho with or without the driveshafts installed
Have the same just after 2 runs... :-( so have to wait for the spare parts...
I've since learnt to completely release the throttle when landing. My bad! 😬
Thanks for watching! Have a nice day
On this car everyone will learn the Word (104001 taff)
I think chasis flexing so much that the crown war pressure the pinion gear ond it snapped.
You could be right, man! Thanks for watching
why does the 124018-19 come with metal hexes but not this :s.... lil jump and micko bends a bone lol...as you said that gear was old and the shattard parts looked rusty from yt anyway lol...
😄
They probably used a old batch of parts just sitting in a warehouse exposed to all the tropical elements over there. Lol 😆
Fortunately I have a couple of spare sets of 12mm metal hexes. Holes were too small so I made them bigger using a 5mm drill bit and now they fit over the axles.
@@MickoRC thats sweet lol and yeah all that moistsure in the air made them go funny..and your right its old stock as my 124019 came with 144001 sticker inside the transmitter tray and the same on a k989 the transmitter sicker was a L898 or something lol
@@andyroo8uk685 😆
Same thing happened to mine except in the rear, on the first run almost instantly. They are setup way to tight sometimes, with no grease, and powdered metal gear. I can't believe they sell them like this, how pathetic. The replacement gears for sell are better quality then original, they are machined not powdered metal. So buy those, then make sure its got good mesh, use shims if need be and grease it up.
Lot of stuff seems to break or bend from not to high jumps and bashing.. 😜💩 need rev 2 or pro version..💪
You're right man.
And I'm not a fan of the absence of a second level bar on this.
@@MickoRC the chassis flexes too much then the gears do not line up and start grinding so this 1/10 scale is too heavy for this too thin aluminium chassis
So, for wltoys, ALWAYS grease the gears... makes sense.
Yep.. don't expect much from wltoys
Watched this with my mother in law hehehehe
oh gosh.. how boring for you guys. 🤣
but thank you!! 😊
Are you sure it 1/14 not 1/10
Its a wltoys this is soo expect... Some brand didn't even test their products before releasing it
Apparently wltoys tested this model by jumping it off a 5 story building. LOL. There's videos of it on YT.
But yeah.. don't have faith in wltoys cars out of the box.. I hope all owners learn that if we're going to buy one do a pre-run service beforehand -- grease gears, diffs, check oil in shocks, etc
Watching hre new friend hre
Thanks for watching! 😊
You have to wonder how many cars they destroyed during their 5 story jump durability showcase before they got one that survived it. These things are money pits.
hahaha.. I'm still not too sure what that jump off the building is supposed to prove. That stupidity exists? 🤣😂
Well rule 1. you get any RC car Grease the Diffs! Rule 2. Grease the Gears, you should know better.
🤣 Yeah you're right bro!
But I just enjoy testing them out completely stock and right out of the box, for you folk out there! 😁