I’m useless at mechanics but thanks to your video (plus blood, sweat and tears!) I managed to upgrade my son’s wltoy’s rcc on Christmas Eve! Thank you sooooo much, he loves it!
That’s what we want 👍 great upload Richie 👍 it’s not silly fast but a good turn of speed and easy to handle 💯 percent and great film editing not showing the boring stuff but keeping us informed on the basics thanks 🙏
It is still possible to lower them, it just takes more work. You could add internal spacers to lower it. Possibly set it up with the dive shafts straight for speed runs?
first thing i always do is set up my wheels to prevent uneven wear... once they are worn wrong they are pretty much on their last leg and need replacing...
Well Brother what a easy to follow instructions how to do the conversion 👍 great Tip with the soldering iron to remove screws 👍 awesome Tips 👌 its Amazing what Wltoys are doing and the price range ,you can't fault it 👍 think the smaller companies are getting bigger by the years and thats good for us, obviously i will get one off these to add to my collection 😀 Anyway Rich a absolutely amazing video brother as always 👍thanks for sharing and hope your having fun on your hols 😀 keep safe my good Freind and stay safe 😊 🇬🇧🇬🇧😎🇺🇲🇺🇲😍
I don't get why ppl keep replacing the servo just get the three wire and the circuit board on a old servo and replace the five wire circuit board with a tree wire and a circuit board and that it
Hey Rich, can you help to briefly explain how the ABS function works with the radio and the program card? Also, very cool brushless setup. I never thought that this affordable combo can run with no cogging. Enjoy your day mate!
Shorten the springs to lower the car. The suspension needs to work in both directions don't lower with droop screws as then the suspension only works in one direction.
@@philthyco1 so lol my point is you can go fast for less $ if you want to. Obviously you could get way more out of it if you put higher end castle stuff in but I mean c'mon, Its not quite hobbygrade and if you start putting big torque to it it's just going to shred the driveline. Unless that's what you're going for 😜
Hey! We were wondering when the new challenge would be out. You said in your last challenge winner video, “The new challenge will be out soon.” No rush, Just wondering! Thanks!
Great videos Richie!! I have a question have you chewed up any bevel gears? I put a 3650 4300kmv and it chewed up the front bevel gear. I greased them and oiled diffs before I used it. So it was lack of grease. So I bought two more 104001 and there stock and greased and added oil to them diffs and both rear bevel gears had gotten chewed up to and they were stock. Hoping someone has a fix to this problem. Also the weren’t even drove hard
Hey! The problem is not lubrication. In this model, there is another problem - the longitudinal play of the differential inside the housing, this breaks the bevel gear. To solve the problem, it is necessary to accurately set the gaps using thin washers 0.1 mm
Very tempted to get one of these but , with the price of the 124019 being so cheap now I’m tempted to get that .... what’s your opinion on this which one should I get
The thing that worries me about that buggy is the amount of flex in the chassis. 60 mph on road crash and you're going to pretzel that chassis. On a positive note you mentioned you wish they gave these names instead of numbers doesn't this one have a name on the side of the body "match"
Richie - could you give your honest comparison between 124019 and 104001. Which one do you feel is better for speed runs? I'm sure alot of people would appreciate your feedback on the two. Im undecided on which one I want to purchase. Thank you for all your honest reviews and great speed run content.
Dude, I was supposed to get mine on Monday but you won't believe what happened. I caught our local delivery guy on my ring cam arriving at my address, scanning the package as "delivered" and driving off without ever knocking on my door. Now the delivery service claims it has been delivered, and now I'm out $95... (Yes, $95, I import these straight from my supplier in china)... Im SO pissed! 😤😤😤
@@RileyBanksWho That sucks. If they don't refund you, just post the video and hope it goes viral. Or better yet, write them and tell them that's what you'll do.
I think that 58mph was from the drive to your filming location. Now way that little f540(which is actually a 390 motor in a finned 540 can) on stock gearing went 58mph.
It's not a 380 ..380 is only 30mm long the rotor inside that motor is 50mm long..It's not a 3650mm like a normal 540 because there is 2-3mm of heatsink..So it's a 3350mm or so..A 380 is 2830mm..This motor can spin up rpm a bit faster than a normal 3650 because it has a bit smaller rotor(circumference) but keeps similar torque numbers because it is still full length rotor
@@apexelite2968 Ahh I read that wrong lol but it's still not a 390 either as a 390 is a 2835mm ..I've had a bunch of f540's.. I know what I'm talking about..Prove what? My Integy? I had it doing 50 on stock system and put in the surpass f540 4370kv up from 3000kv stock and it straight up fly's! ..I only have videos of the stock system as I've moved to the mountains and haven't found a place I could do speed runs at yet but I will this summer..Now with that said Richie's Wltoys was not doing 58mph but the motor is more than capable of it.. Cheers
WLTOYS 104001 this car should have came upgraded already now they use in this car as a platform new Appliance in the car wltoys they could have made a lot of money off your car wltoys 1044001.!!!!🤑🤑🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
WLtoys wasn't my first RC but they ARE 4 of my favorites. I ran my 104001 1 time on stock before i converted it to brushless.
I’m useless at mechanics but thanks to your video (plus blood, sweat and tears!) I managed to upgrade my son’s wltoy’s rcc on Christmas Eve! Thank you sooooo much, he loves it!
Epic and awesome that’s the kind of comment that makes this all worthwhile
That’s what we want 👍 great upload Richie 👍 it’s not silly fast but a good turn of speed and easy to handle 💯 percent and great film editing not showing the boring stuff but keeping us informed on the basics thanks 🙏
You can add shock limiters inside the shocks to lower the car. No need for droop screws. 3-5 mm of fuel tube in each one.
It is still possible to lower them, it just takes more work. You could add internal spacers to lower it. Possibly set it up with the dive shafts straight for speed runs?
awesome brushless build,cool run
first thing i always do is set up my wheels to prevent uneven wear... once they are worn wrong they are pretty much on their last leg and need replacing...
Awesome! I just did mine as well and omg it is so much more fun to drive now!
I'm going to try those adjustments on the wheels as well.
Well Brother what a easy to follow instructions how to do the conversion 👍 great Tip with the soldering iron to remove screws 👍 awesome Tips 👌 its Amazing what Wltoys are doing and the price range ,you can't fault it 👍 think the smaller companies are getting bigger by the years and thats good for us, obviously i will get one off these to add to my collection 😀 Anyway Rich a absolutely amazing video brother as always 👍thanks for sharing and hope your having fun on your hols 😀 keep safe my good Freind and stay safe 😊 🇬🇧🇬🇧😎🇺🇲🇺🇲😍
im really looking forward to what people do with these, goo video Richie!
You can trim the plastic on the side guards
You didn't put link your brushless set up in description? 😊
Can you do another review on the new information on the drag slash
Can’t wait to see you convert the new 4tec coming out.
Some foams, and a CC set up, you'll be up in the high 60's. As always, good video
Thanks for the tips on the conversion and All your videos as well...I learned a lot🤘😀😁
I don't get why ppl keep replacing the servo just get the three wire and the circuit board on a old servo and replace the five wire circuit board with a tree wire and a circuit board and that it
I had to use my heat gun. Some screws on the main areas. I used metric screws
I wonder where they got that motor mount idea from..... TLR232123
Ditch that esc for a Surpass Hobby 80 amp King Kong if your staying budget minded..That looks like the rcharlence esc's and they are no good
58? Looked like 45 max.. Proper speed run coming next?
@Tommy Vercetti Way better than the one that's in there..They actually work well
@Tommy Vercetti I suggested surpass hobby because it's a budget minded build
RICHIEEEEEEE. good stuff rich. I’m thinking of doing this as soon as I’m done with my traxxas 4 Tec 2.0 6s setup
In school can’t wait to get out so I can watch this video
Haahahah here is almost Midnight lol
@@fran.6496 🤣
Do you have a link to that brushless combo?
Great video mate, might take the plunge and do a brushless conversion cus i have many ESC etc sitting doing nothing lol 🤜🏻🤛🏻
Can you compare that sliding motor mount to the one from 144001, wondering if this is the solution I've been waiting for?
when buying a bigger pinion, what pitch do i need? 48P?
So can't use the servo that is in?
Hey Rich, can you help to briefly explain how the ABS function works with the radio and the program card?
Also, very cool brushless setup. I never thought that this affordable combo can run with no cogging. Enjoy your day mate!
The tires Indoors 👊🏻👍🏻
Hello,
Which motor did you choose ?
And wich servo ?
Thanks
Nice bro
What brushless set up is this,i just ordered mine and wanting to go brushless
The chassis flexes and can strip those bevel gears..
Hi friend ,what combo you recomended for the wltoys 124019 without burning hahaha i mean faster ( 75 km/ h max ) but not to fast 😎
Shorten the springs to lower the car. The suspension needs to work in both directions don't lower with droop screws as then the suspension only works in one direction.
Put the ESC in back of the motor and receiver IN front of motor
Never 58mph that richie 🤔
yeah I have to agree, it doesn't feel that fast on the video for sure
He didn’t seem to max it out either? And yes it did not seem 58mph
Looks like 40mph
Is there any mod available to fit a bigger size battery in there?
I fitted a 3660 3500kv and a max10sct 20kg and hit 59mph on 4s
Right..That was not 58mph imo
@@philthyco1 🤭
I can get 50 on 2s with a 60 amp hobbywing and 3652 4000kv hobbystar. Bigger isn't always the answer to more speed 🤣 fun trying though
@@theguyinthecomments9543 Yea geared to the moon lol
@@philthyco1 so lol my point is you can go fast for less $ if you want to. Obviously you could get way more out of it if you put higher end castle stuff in but I mean c'mon, Its not quite hobbygrade and if you start putting big torque to it it's just going to shred the driveline. Unless that's what you're going for 😜
Ive seen people having problems with chassis flex, do you?
Hey! We were wondering when the new challenge would be out. You said in your last challenge winner video, “The new challenge will be out soon.” No rush, Just wondering!
Thanks!
Great videos Richie!! I have a question have you chewed up any bevel gears? I put a 3650 4300kmv and it chewed up the front bevel gear. I greased them and oiled diffs before I used it. So it was lack of grease. So I bought two more 104001 and there stock and greased and added oil to them diffs and both rear bevel gears had gotten chewed up to and they were stock. Hoping someone has a fix to this problem. Also the weren’t even drove hard
Hey! The problem is not lubrication. In this model, there is another problem - the longitudinal play of the differential inside the housing, this breaks the bevel gear. To solve the problem, it is necessary to accurately set the gaps using thin washers 0.1 mm
TOPP.
Now this is how the car supposed to be
Very tempted to get one of these but , with the price of the 124019 being so cheap now I’m tempted to get that .... what’s your opinion on this which one should I get
If you want a basher/racer buy the 104001,if you want a speedrun car buy the 124019
I am buying the 104001 because it looks awesome and I can upgrade it down the road
Richie all you had to do was un do the 2 screws on the adjustable motor mount and slide it out.
It won’t slide out the bottom of the mount hits the plastic side tray
@@DriftomaniacsRC As you slide it out lift it or loosen the bottom screws
The thing that worries me about that buggy is the amount of flex in the chassis. 60 mph on road crash and you're going to pretzel that chassis.
On a positive note you mentioned you wish they gave these names instead of numbers doesn't this one have a name on the side of the body "match"
They should of made it 3s it is just to underpowered but Wltoys probably only put electrics in it so it could be an rtr but it’s meant to be upgraded
Richie - could you give your honest comparison between 124019 and 104001. Which one do you feel is better for speed runs? I'm sure alot of people would appreciate your feedback on the two. Im undecided on which one I want to purchase.
Thank you for all your honest reviews and great speed run content.
hi!
10th Scale Garage showed no diff grease in his.
I showed that nearly a week ago 😂
@@PERTHWESTOZRC sorry pal. I didn’t see it. Good looking out though. Cheers!
@@gilflores789 feel free to subscribe mate 👍😁
Dude, I was supposed to get mine on Monday but you won't believe what happened. I caught our local delivery guy on my ring cam arriving at my address, scanning the package as "delivered" and driving off without ever knocking on my door. Now the delivery service claims it has been delivered, and now I'm out $95... (Yes, $95, I import these straight from my supplier in china)...
Im SO pissed! 😤😤😤
Didn't you save the video and can't you use that as evidence that it wasn't delivered?
@@MrPhilbautista I did save the video and have send it in. But they still require written proof of loss (wtf)
@@RileyBanksWho That sucks. If they don't refund you, just post the video and hope it goes viral. Or better yet, write them and tell them that's what you'll do.
😎
This car would be much cooler with wider and bigger tires.
Next
On there x ♾
Or
There x ♾
Richie fix your front toe its out of wack
10:mins he said. Complete liar don't believe his bull people
I think that 58mph was from the drive to your filming location. Now way that little f540(which is actually a 390 motor in a finned 540 can) on stock gearing went 58mph.
It's not a 380 ..380 is only 30mm long the rotor inside that motor is 50mm long..It's not a 3650mm like a normal 540 because there is 2-3mm of heatsink..So it's a 3350mm or so..A 380 is 2830mm..This motor can spin up rpm a bit faster than a normal 3650 because it has a bit smaller rotor(circumference) but keeps similar torque numbers because it is still full length rotor
I run a similar motor in my Integy buggy doing nearly 70 geared up of course lol
@@philthyco1lol prove it. I never said it was a 380. I said 390. It really is a 390 motor in a finned can. Open it up.
@@apexelite2968 Ahh I read that wrong lol but it's still not a 390 either as a 390 is a 2835mm ..I've had a bunch of f540's.. I know what I'm talking about..Prove what? My Integy? I had it doing 50 on stock system and put in the surpass f540 4370kv up from 3000kv stock and it straight up fly's! ..I only have videos of the stock system as I've moved to the mountains and haven't found a place I could do speed runs at yet but I will this summer..Now with that said Richie's Wltoys was not doing 58mph but the motor is more than capable of it.. Cheers
@@philthyco1 wrong. A 2430 is a 370. A 380 is a 2838. A 390 is 2845/or 2848 which is what's in your f540 can.
Will 1/8 brushless motor fit in that rc?
WLTOYS 104001 this car should have came upgraded already now they use in this car as a platform new Appliance in the car wltoys they could have made a lot of money off your car wltoys 1044001.!!!!🤑🤑🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥