I'm in DFW and I'm working on building a system to haul empty shipping containers. Do you have any trucks with this system on them that I could take a look at? Thanks!
Came looking for ideas on building a toy hauler. I think you did a good job, but 8 would drill and bolt or rivet the dump brackets. Other than that looks cool.
do not take any notice of this video as a professional tipping gear fitter of over 40 years this is an amatuer trying to do something he IS not capable of. THIS IS an absolute DANGEROUS FITTING JOB
The only thing that really makes me raise an eyebrow is that square tube thst runs along the top of the frame rails. I dont understand why there is a gap between the tube back by the hinges and the length that runs up to the cab... And there wouldnt have been any problem stitching those to the frame rails, maybe move around alot as you weld to be safe. But that square tube shouldve been one piece. Its plenty solid but you get a full box of dirt or busted up concrete and shit might get kind of colorful lol
Thank you for the video. I have seen some trucks with the pump connecting to the existing batteries. Did you add a third battery for the pump? Good job by the way!
te quedó con madre tu camioncito de volteo amigo. yo tengo una flat bad trailer y quiero comprar material y hacerla de volteo tengo una maquina de soldar es flux core tu que maquina usaste.? saludos
Oye juan estoy trabajando en un hidraulico igual de esa misma marca pero cuando conecto el cable positivo de la bateria hace chispas si precionar el control que puedo hacer?
I would not recommend standing under the box without a prop rod, more than one person has been crushed when a hydraulic line blows! Including my wife’s uncle!
If a hydraulic line blows.... it doesn't come down in .05 seconds bro. You still have time to move easily. Working under it... YES, a prop rod is a must
@@javynlandscaping2677BS. I had a midrise car hoist that blew a hydraulic hose. It came down INSTANTLY. If I would have been under it, i would not be here now.
Búscala en premium supply, si preguntaras por el kit pues te recomiendo el de 8tons eso si está corta, si el chassis es largo pues el de 10tons para dompear más facil
By removing the hydraulic hose, yes the bed will go down by itself but won’t put down pressure to where it breaks the 4x4 wooden post! Is it a small bed or a bed from a dual axle truck?
Only heat treated frames cannot be welded. Not sure on this one. I have a Class 8 Kenworth and the frame rails are heat treated. Welding on them is a no no.
No is not to far back, it’s where it suppose to be, and I did dump 12 square yards of shingles that was thrown in the front, if it’s moved more to the cab it will have less angle 📐 dump degrees, right there it’s at 47 degrees
@@juanvaldez1441 😂 bro you used 1/8" square tubing for your subframe that was your first mistake, your welds are dog shit and you have no clue on how to properly structure anything. You will have huge rust issues eventually and more cracks than you can count on your hands and toes. You mounted your battery and pump/resorvoir externally and it is not even covered. All i can say is good luck in court after it starts falling apart on the highway, and when they see how you fabricated that together you are deff done for. Literally the worst job i have ever seen, these are not learning projects for clowns like you, consult with a real welder and fabricator before haggering your frame the way you did. And it is "Angle Iron" not angle liner dumbass
![[UNCUT] รัฐสั่งหยุดปล่อยคลื่น! แต่หยุดพลังปะทุ “น้องหญิง” ไม่ได้ I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/RmQh47eIiV0/mqdefault.jpg)
Looks sturdy, great job.
Are you using single acting cylinder?
Looks good! Thanks for sharing.
Nice, do you wish you moved it to dump to 50 degrees?
I'm in DFW and I'm working on building a system to haul empty shipping containers. Do you have any trucks with this system on them that I could take a look at? Thanks!
Came looking for ideas on building a toy hauler. I think you did a good job, but 8 would drill and bolt or rivet the dump brackets. Other than that looks cool.
I like the vidio. Good job my friend.
Where did you get the hydraulic setup?
that's awesome 👍
Great job !!!!!!!!
Good video. And its angle iron lol. That's driving me nuts! Lol
angle liner? LMAO!!
Google angle liner and you will see what pops up
Good work sir
Great job! Do you think I can put this on an 8’ dump insert?
Yes
what size hidraulic pump ??
How for out of the cylinder the rod come
Nicee video👍👍👍
How much did you pay for the hydraulic cylinder and pump ❓❓❓ thank you
Took me forever to find a video like this! Thanks for sharing. If you could explain the hidges that'd be great!
do not take any notice of this video as a professional tipping gear fitter of over 40 years this is an amatuer trying to do something he IS not capable of. THIS IS an absolute DANGEROUS FITTING JOB
Norman Shakespeare
😂😂😂😂😂
It’s still working great,
The hinges come with the hoist kit, I added an angle liner to the i beam bed frame to make it sturdy, the i frame is to thin!
NEXT PROJECT A ROLLOFF HOIST KIT ON A NPR OR BIGGER TRUCK!
The only thing that really makes me raise an eyebrow is that square tube thst runs along the top of the frame rails. I dont understand why there is a gap between the tube back by the hinges and the length that runs up to the cab... And there wouldnt have been any problem stitching those to the frame rails, maybe move around alot as you weld to be safe. But that square tube shouldve been one piece. Its plenty solid but you get a full box of dirt or busted up concrete and shit might get kind of colorful lol
Good. I like it
Thank you for the video. I have seen some trucks with the pump connecting to the existing batteries. Did you add a third battery for the pump? Good job by the way!
Yes I added a third battery
Greetings . How many liters of oil does this pump throw into the cylinder every minute?
can you bring the cylinder to 700 bar?
I don’t know
te quedó con madre tu camioncito de volteo amigo.
yo tengo una flat bad trailer y quiero comprar material y hacerla de volteo
tengo una maquina de soldar es flux core
tu que maquina usaste.?
saludos
Tu eres el que me hablaste?
Me hablaste para agarrar información de la troca?
Thanks men, there is very little info about this conversion
Doroteo Arango what is that you need to know?
Were you get the hydraulic pump at
eBay ph520 10ton lift
Actually this one is the 516 8 ton lift
So what else do you need to know Valentine
I need to do this to box truck
Is it possible
What type of tradesman can do this for me
I thought YOU were IN the coffee business............!?
😂😂😂
What kind of pump is that a single or a double action
Albert Beliard double
Up and down
NOT UP AND GRAVITY DOWN
Hola Juan que maquina para soldar usaste?
Crees la maquina de soldadura de rollo se pueda para este tipo de trabajo?
nglezcasas
Es la que use, .035 wire,
.35 flux cor
Juan Valdez
Tengo una utility F450 truck y la quiero convertir para Dump, y estado buscando videos y nadie explica tan detallado
Muchas gracias.
Noe
nglezcasas cuando acabe la lleve para que la soldaran mejor con soldadora grande
Oye juan estoy trabajando en un hidraulico igual de esa misma marca pero cuando conecto el cable positivo de la bateria hace chispas si precionar el control que puedo hacer?
How have the hydraulics worked for you?
Larry D great,
This truck was sold, and I made 2 Rolloff trucks with the same system! 3-4 years and No problems
Amigo de cuantos caballos es el motor electrico y la bonba cuanto de caudal tiene gracias por tu respueta
17,500lbs
I would not recommend standing under the box without a prop rod, more than one person has been crushed when a hydraulic line blows! Including my wife’s uncle!
If a hydraulic line blows.... it doesn't come down in .05 seconds bro. You still have time to move easily. Working under it... YES, a prop rod is a must
Javyn Landscaping yes it does!
My wife’s uncle was crushed to death that exact way!
@@javynlandscaping2677BS. I had a midrise car hoist that blew a hydraulic hose. It came down INSTANTLY. If I would have been under it, i would not be here now.
How much weight could that pump push. What was it rated as
redburro88
That’s a 8 ton lift, I have Rolloff trucks with the 10 ton and I have dump 16,000lbs that’s the most I ever had with the dumpsters
Tengo problemas al levantar la cama es bien lento no era así
Hi Juan I'm from Dallas tx do you build for clients
Nah
Una pregunta, que tipo de bomba recomiendas par una dump truck ford f450 diesel
La de 3,000 psi
Búscala en premium supply, si preguntaras por el kit pues te recomiendo el de 8tons eso si está corta, si el chassis es largo pues el de 10tons para dompear más facil
@@juanvaldez1441 ok gracias
Good video. It's angle iron not angle linner
Were you get the hydraulic pump at & how much ? Trying to look for one one any suggestions
Felix Garza eBay from Johnson Trailer Parts, this one is the 8 ton hoist
Amigo de que estado vives
Chinto Rafa vivo bien y tú ?
where are you located juan
Sheila Sainz
I did it myself, and don’t have a shop, I know how to weld, a person that can weld can do anything
how much would you charge me to put a hydraulic hoist on my truck, i have a similar truck like yours
I don’t do this for living, sorry, I do junk removal
Cuanto mide la caja
How can I safely hold a dump in the air I have a hose leaking
Change the hose!
9 4
Put a 2 thick pipe or 2 4x4 wooden post under the bed, that’s if the bed goes all the way up!
By removing the hydraulic hose, yes the bed will go down by itself but won’t put down pressure to where it breaks the 4x4 wooden post!
Is it a small bed or a bed from a dual axle truck?
Juan Valdez duel axle yeah I found some long 2inc pipe and some blocks
Not gonna lie, your passenger side hinge is kinda bent.
Robert L
I know it was re welded, cause I lifted it to much and it hit the lift and bent, truck sold, I kept it for like 6 months
LOL, I noticed the same. Good that he taken care of it.
que tipo de aceite lleva el tanque
Hydraulic
whilee not put an force in the trasmision
because they do not use the power port of the transmission to put a hydraulic pump and avoid putting the hydraulic unit
you are NOT allowed to weld on to the frame rails
Not so, some frames can be welded, not all but some
Only heat treated frames cannot be welded. Not sure on this one. I have a Class 8 Kenworth and the frame rails are heat treated. Welding on them is a no no.
@@oby-1607 Here's how to be sure: Look at how the mfg attached things. If they didn't weld, you shouldn't either.
Bruh i won an f250 from an auction with a dump bed for 300$ idek what to do with it im 17
Junk removal business
Your hoist is to far back if you put 12 yards of mulch in that bed towards middle to the front it would never dump it
No is not to far back, it’s where it suppose to be, and I did dump 12 square yards of shingles that was thrown in the front, if it’s moved more to the cab it will have less angle 📐 dump degrees, right there it’s at 47 degrees
@@juanvaldez1441 ok
Holy sheesh, bud you got the drive, but you need to do some research and get the knowledge, you did some questionable shit with the subframe there 😂
AND?
It works just fine!!!
@@juanvaldez1441 Lol it might work fine for 2 tons in that bed and very light duty work
@@firstdegree5386 like if I don’t know!!!
I use to use for junk removal, light stuff,
I know my CDL SHIT
@@juanvaldez1441 😂 bro you used 1/8" square tubing for your subframe that was your first mistake, your welds are dog shit and you have no clue on how to properly structure anything. You will have huge rust issues eventually and more cracks than you can count on your hands and toes. You mounted your battery and pump/resorvoir externally and it is not even covered. All i can say is good luck in court after it starts falling apart on the highway, and when they see how you fabricated that together you are deff done for. Literally the worst job i have ever seen, these are not learning projects for clowns like you, consult with a real welder and fabricator before haggering your frame the way you did. And it is "Angle Iron" not angle liner dumbass
@@juanvaldez1441 And don't ever say you know your CDL shit again, you have no idea, evidently 😂