I did it thanks to you and it makes a HUGE difference. I’m not a fan of tinny, piercing highs so these plug-and-play tweeters were perfect for my audiophile ears. I was confident doing the job because of this video.
This is still wildly helpful in the year 2022. Thanks for posting. I went with the same setup and a Zinger Heigh 10 head unit and even without amplification it sounds 10x better. Thanks!
Great video, followed your instructions and got it knocked out in 15 mins over my lunch break thanks yo your video. The sound difference is amazing, very happy!
Your video helps a lot. Only thing is you called the A-pillar an A-frame. Not trying to be a jerk but trying to help. Thanks for your help I will now try to tackle my speakers.
speakerwatchedyourunnecessary so I called and told the rep this is not what I needed and after several more conversations and noticing from your drop down guide the tweeter needed I convinced the rep to watch your video. They still have no clue and or don't have this part in stock so I have to take the door panels off, take the speakers out and send their kit back and start all over. ANYWAY all that said to say again whoever discovered this works is GENIUS !!!!!!!!!!
Thanks again for the inspiration, I ordered the exact set up you but also included a small Alpine amp, everything should be here by tomorrow. You're video's are well made and easy to follow along, thanks again!
No problem Jimbo! I appreciate the positive feedback! I would like to do an amp video too but I have to investigate how first. Let me know how it goes for you! Thanks for checking out my channel!
@@GarageGear Will do, I'm getting a small 4 channel Alpine. Nothing crazy, I'm not a big bass guy, just wanted a little extra umphh to the mids and highs. I'll let you know how it goes!
Thx for the great video. I will tackle anything but not without a little research. I followed your suggestions and I got my tweeters from Amazon. Watching your video before the installation was perfect. I actually did not disconnect the battery but I can see why you did especially working around airbag devices. I do have a few suggestions that made it easier for my installation. One, I used an offset 10 mm wrench for the inside tweeter bolt which was much faster to complete. And two, I used a pair of hemostats to hold the wire harness while I disconnected and connected the clip. (I would not have done that without your suggestion, and you wouldn't want to lose that in such a difficult location). It took me about 20 minutes tops. Thx for all the info. The tweeter change alone made a nice difference alone in the sound. Did your other speaker install really make a huge difference? I heard without adding more power to the head unit, or installing a kicker sub, it is not worth it. (insulating the doors as well for speakers????? LMK
Hey Paul! Appreciate the positive feedback. If you are looking more volume you may want to add an amp. I just did all speakers and tweeters and it cleaned up the sound quality big time. The volume for me is loud enough. Anymore questions let me know thanks for watching!
Question: What fender flares are on your truck? I have a 2023 Taco SR access cab that didn't come with OEM fender flares. I understand that by not having the OEM flares that not all mounting bolts/hardware are there in order to mount aftermarket flares. Thanks.
FINAL EDIT: IF ONE"S BUDGET IS ONLY $100, this IS the super-buck-bang tweeeeak. AFTER 48 hours of testing on my '21 Taco, try moving the fader to front from rear just one notch and the STOCK door woofers turn into $120 brand set ups. In fact now you are in the "wall of sound" instead of it being behind the dash, lol. The whole interior was softly vibrating! It really feels like the musicians are inside the truck.The fact that this Kicker tweeter turns the whole stock system better from bass to mids and highs. With percussion snare and hi-hat enhancement the bass is fantastic! No snare- no beat ! Vocals are much better. Guitar, strings, piano upper midranges are way improved! All music genres are perfected. This product turns the stock system into JBL or better for a hun dog. Plug and Play! I did both tweeters in 15 minutes.
@@GarageGear Thank you for your cool vid! I had to lower the treble, seems like the speakers hog the juice a bit. The difference with the swap is like not having a bunch of ear wax muddle the instruments.
I was doing a speaker upgrade in my Taco, and although it sounded better, you can tell the stock head unit wasn't able to challenge them at more amps. Pioneer 6x9 component's in the front, Rockford Fosgate component 6.5's in the back. After being impressed by the quality, not the power, I decided to upgrade the Head Unit and get the factory Panasonic unit out of there. Went with the high power (45 Watt RMA) Sony XAV-AX7000. Now its proper
Flint Layfield I am very happy with this purchase! I looked into pioneer too but it involved too much wiring especially on the tweeters. Plug and play was the way to go!
Great video - this’ll be one of the first things I do. Question kind off topic of the post - know how to remove the back headrests? I have same access cab but no clue how to get the back seat cover off.
Walter thanks for watching! Super easy install and worth the investment! As far as getting the back seat covers off, sorry can’t help you there. Haven’t tried to do that so I don’t have a clue. Thanks for checking out my channel!
When you said you wondered if they installed the tweeters before the windshield...yes and no. The entire dash is assembled separate from the truck and then installed as a complete unit.
Jason DeVos hud Jason! For many months last year, after I purchased my 2019, I found that amazon hadn’t updated their product listings with the current year/model. Double check fittings on Crutchfield just to be sure
If you go on crutchfield.com and type in your exact model it will show you the exact sizes you need for each. Thanks for checking out my channel Angel!
You can take out the stock tweets and gut them out and put in any tweeter you want for less then 30 bucks and are better then the kicker I used old school mb quart Germany made and sound so much better the tweeter and the 6x9 are wired in series by factory that is no bueno and cuts the power in half u are better getting a passive crossover
I would be believe so yes but to be sure you can contact crutchfield.com and double check before you get started! Thanks for checking out my channel John!
@@tjbreese630 I double checked the wiring harness and it’s saying that my own link will not fit my 2019 Tacoma. Seems weird because those are the ones I used! You can go on crutchfield.com and double check the product numbers to find a match. Let me know how this works for you.
You definitely want to takeoff the coverof a frame first I tried it and broke one of the mounting tabs on the speaker grill and it’s easy enough to do why not just do it
I think it can be done but it’s a lot harder! You’re better off removing the pillar. It’s not hard to do. If you skip the pillar I believe your have trouble putting the cover back on. Thanks for checking out my channel!
Holy shit!!Best 100 bucks I spent on my tacoma so far. I just installed these tweeters on my 2021 tacoma and it makes a HUGE difference. Do you think the door speakers are worth it also? Great install video. Just subscribed!
Awesome! They do make a huge difference! I would definitely recommend installing new door speakers! You’ll be blown away with the improved sound quality. The stock speakers are garbage. Let me know if you put the new ones in and how they sound Wes! Thanks for checking out my channel!
I installed the whole set of speakers and tweeters. The exact same model. And it sound really bad. I was wondering if you guys noticed the same and if any of you had to install and amplifier. In my opinion sound is very distorted
Hey man! So I did a ton of research and it seems like you need the Entune Premium Headunit for the speakers to properly work. If you only have Entune (base) or Entune Plus , you would need in addition an amp to adequately feed the speakers. Not sure if this is your problem, but this could be the reason why the same speaker setup does not sound good in your circumstance
Whitie in Vermont I bet you could do this in your vehicle bud! What kind of vehicle do you drive? Usually tweeters are just a couple of screws. Panels can be a pain in some vehicles.
@@GarageGear I drive a 2010 Subaru Legacy. I've owned it for around 7 years now and I've always wanted to put in my Sirius XM satellite receiver but I don't have the ability to add it without taking the dash apart and part of the center console. I don't have a audio input in the front of my factory radio. Plus I need to put a wire harness to replace my factory stereo with something new. I have the harness but after researching it I was overwhelmed and said screw it. I'm to cheap to pay someone $200 to do the installation on top of paying for the equipment. I have a lifetime subscription to Sirius and I can install three times in a lifetime before my lifetime is null and void.
Whitie in Vermont I hear ya bud! Some vehicles are more complicated than others. I know I’m keeping this truck for a while so I figured this would be good to do now! Did you ever search out TH-cam videos on the install?
@@GarageGear I did research years ago. Maybe I'll do another search. I don't know how much longer I'll have my 10 year old vehicle. I was surprised that I've had it this long. Maybe I should just pull the trigger and do it. I'm sure that there's a lot more videos on how to do it now on TH-cam.
This is a great video! I've been thinking about upgrading the sound in my 2020 Tacoma and this is just what I've been looking for!
Glad you found these videos helpful! In no time at all you can have a brand new sound system in these trucks! Thanks for watching!
arness didn't fit my rear speakers. They have a smaller plug. 2020
I did it thanks to you and it makes a HUGE difference. I’m not a fan of tinny, piercing highs so these plug-and-play tweeters were perfect for my audiophile ears. I was confident doing the job because of this video.
Awesome Jaredius! Glad you got them in no problem and they sound great! 👍
This is still wildly helpful in the year 2022. Thanks for posting. I went with the same setup and a Zinger Heigh 10 head unit and even without amplification it sounds 10x better. Thanks!
Awesome to hear Bryant! Appreciate the positive feedback! Thanks for watching!
gentleman, let's take a moment to appreciate the fact that this man has located a 10mm socket
Got a few believe it or not! Thanks for watching!
Haha I said the same once he said 10mm I said welp I'm screwed
Great video, followed your instructions and got it knocked out in 15 mins over my lunch break thanks yo your video. The sound difference is amazing, very happy!
Thanks for the positive feedback Mark! Swapping these out is relatively easy and straightforward! Thanks for checking out my channel! 👍
Thanks man. I’ve been doing a lot of research. Your video is by far the best one I seen
Awesome bud! Glad you found this video helpful! Thanks for watching!
I agree, darn good video. I ended up getting the same set up plus an amp.
Your video helps a lot. Only thing is you called the A-pillar an A-frame. Not trying to be a jerk but trying to help. Thanks for your help I will now try to tackle my speakers.
Thanks for the feedback and for watching! Enjoy the job.
speakerwatchedyourunnecessary so I called and told the rep this is not what I needed and after several more conversations and noticing from your drop down guide the tweeter needed I convinced the rep to watch your video. They still have no clue and or don't have this part in stock so I have to take the door panels off, take the speakers out and send their kit back and start all over. ANYWAY all that said to say again whoever discovered this works is GENIUS !!!!!!!!!!
So we’re you able to finish this project?
taking out the battery makes sense glad i watched this video thanks GG
Thanks for watching Ernest!
Just subbed out my tweeters and used this vid as reference. MASSIVE improvement! Thanks so much.
Hey Lee! Glad you found this video helpful! Thanks for watching!
Great video. You only need the negative battery terminal disconnected, power travels negative to positive.
Thanks for the tip! I’m nowhere close to being an electrician! Thanks for checking out my channel! 👍
Thanks again for the inspiration, I ordered the exact set up you but also included a small Alpine amp, everything should be here by tomorrow. You're video's are well made and easy to follow along, thanks again!
@@MelloThatDude The amp will be for the 6 x 9‘s and the 6 1/2 I bought a four channel amp.
No problem Jimbo! I appreciate the positive feedback! I would like to do an amp video too but I have to investigate how first. Let me know how it goes for you! Thanks for checking out my channel!
@@GarageGear Will do, I'm getting a small 4 channel Alpine. Nothing crazy, I'm not a big bass guy, just wanted a little extra umphh to the mids and highs. I'll let you know how it goes!
@@jimbossemi-customs3129 yes please! I think I was looking at a similar one a while back!
@@jimbossemi-customs3129 it’s been a year, how’s the upgrade doing? You like the results?
Thanks a lot for this video! It was detailed and easy enough for a noob like me to follow along and replace the tweeters. :)
Awesome Nair! Glad you found this video helpful! Enjoy the new sound! Thanks for checking out my channel! 👍
the sound is SO MUCH better than the 5 oz factory speakers. Came here to see about adding tweeters.
Dreamwood Jewelry totally agree! Thanks for watching!
Thx for the great video. I will tackle anything but not without a little research. I followed your suggestions and I got my tweeters from Amazon. Watching your video before the installation was perfect. I actually did not disconnect the battery but I can see why you did especially working around airbag devices. I do have a few suggestions that made it easier for my installation. One, I used an offset 10 mm wrench for the inside tweeter bolt which was much faster to complete. And two, I used a pair of hemostats to hold the wire harness while I disconnected and connected the clip. (I would not have done that without your suggestion, and you wouldn't want to lose that in such a difficult location). It took me about 20 minutes tops. Thx for all the info. The tweeter change alone made a nice difference alone in the sound.
Did your other speaker install really make a huge difference? I heard without adding more power to the head unit, or installing a kicker sub, it is not worth it. (insulating the doors as well for speakers????? LMK
Hey Paul! Appreciate the positive feedback. If you are looking more volume you may want to add an amp. I just did all speakers and tweeters and it cleaned up the sound quality big time. The volume for me is loud enough. Anymore questions let me know thanks for watching!
The actual speaker install was really easy..thanks for the video!
Yeah it’s not complicated at all! Very straight forward! Thanks for watching bud!
Question: What fender flares are on your truck? I have a 2023 Taco SR access cab that didn't come with OEM fender flares. I understand that by not having the OEM flares that not all mounting bolts/hardware are there in order to mount aftermarket flares. Thanks.
I have a 2019 TRD OFF ROAD and my fender flares are OEM. They came with the truck!
Lol 🤣 I was listening to this video through my tacoma stock tweeters...
Ha awesome! Let me know how everything sounds when you’re done!
FINAL EDIT: IF ONE"S BUDGET IS ONLY $100, this IS the super-buck-bang tweeeeak. AFTER 48 hours of testing on my '21 Taco, try moving the fader to front from rear just one notch and the STOCK door woofers turn into $120 brand set ups. In fact now you are in the "wall of sound" instead of it being behind the dash, lol. The whole interior was softly vibrating! It really feels like the musicians are inside the truck.The fact that this Kicker tweeter turns the whole stock system better from bass to mids and highs. With percussion snare and hi-hat enhancement the bass is fantastic! No snare- no beat ! Vocals are much better. Guitar, strings, piano upper midranges are way improved! All music genres are perfected. This product turns the stock system into JBL or better for a hun dog. Plug and Play! I did both tweeters in 15 minutes.
It’s a power buy for sure! Thanks for sharing all this Law!👍👍👍
@@GarageGear Thank you for your cool vid! I had to lower the treble, seems like the speakers hog the juice a bit. The difference with the swap is like not having a bunch of ear wax muddle the instruments.
@@sativabros same here my friend! Totally agree! Much clearer sound! 👍
Dude you make look so easy ❤
Haha it takes twice as long to film the procedure trust me! Thanks for watching
Thank for the vid. Inspired me to upgrade mine. Just finished.
Glad you found this video helpful! They make a big difference! Thanks for checking out my channel!
Very helpful videos. I can't find the tweeters you installed on Kicker's or Crutchfield's website. What model number is it?
Hey Kevin if you click the Amazon link in the description you should be able to find the info you need! Thanks for watching
Thanks excellent video , My Tacoma 2020 I’ve upgrading the sound bud Crutchfield not have that’s quality tweeter, I used your links to buying thanks
Thanks a lot Jose! Glad you found what you needed! Thanks for checking out my channel!👍
I was doing a speaker upgrade in my Taco, and although it sounded better, you can tell the stock head unit wasn't able to challenge them at more amps. Pioneer 6x9 component's in the front, Rockford Fosgate component 6.5's in the back. After being impressed by the quality, not the power, I decided to upgrade the Head Unit and get the factory Panasonic unit out of there. Went with the high power (45 Watt RMA) Sony XAV-AX7000. Now its proper
Thanks for sharing this Michael! Was it a tough install for the head unit? Thanks for watching!
@@GarageGear not hard at all. I think there was one wire that required me to insert a pin, other than that, one of the simplest I have done
Nice. Kicker makes some good stuff!
Flint Layfield I am very happy with this purchase! I looked into pioneer too but it involved too much wiring especially on the tweeters. Plug and play was the way to go!
Very helpful thank you! One tip, you only need to disconnect the negative on the battery (much easier)
Thanks for watching Solomon and thanks for sharing!👍
Thank you. Will do for a 4runner.
Awesome my friend! Thanks for watching
You changed the speakers without adding an amplifier?
Didn’t need one. It sounds great. Thanks for watching.
love the video and installation but removed the positive first?
Hey thanks Nathan! If I recall correctly, crutchfield.com’s instructions stated to do that first on these. Thanks for watching! 👍
Will these work on my 2023 Tacoma?
You’ll have to check in crutchfield.com
Awesome videos. Thank you!
Will all of these parts fit on a 2022 Tacoma?
Thanks King! I believe so but to be 100% sure I would check with crutchfield.com. Thanks for watching!
Update does it fit on a 2022 I need to upgrade mine too please tell me someone
Great video - this’ll be one of the first things I do. Question kind off topic of the post - know how to remove the back headrests? I have same access cab but no clue how to get the back seat cover off.
Walter thanks for watching! Super easy install and worth the investment! As far as getting the back seat covers off, sorry can’t help you there. Haven’t tried to do that so I don’t have a clue. Thanks for checking out my channel!
Garage Gear you bet and SUBSCRIBED!
Walter thanks bud! More content coming soon!
Hi, thanks for your video! I don't find anywhere de kicker tweeter. Do you have de exact part number? Thank you.
Hey Benoit, I have the tweeters linked in the video description below. Thanks for watching!
I was convinced to get these after watching your video but apparently they won't work if your Tacoma came with the jbl speakers??
I’ve heard the JBL set up is a little different. What are the major differences? Connections?
When you said you wondered if they installed the tweeters before the windshield...yes and no. The entire dash is assembled separate from the truck and then installed as a complete unit.
Ah got it! That would make sense! Thanks for sharing Josh!
You need a set of ratcheting closed end wrenches...they make a world of difference....
Probably so! I agree! May need to pick up a set!
Do you need to disconnect the negative battery terminal as well, or just the positive side?
Just the positive like I did in the video is all that is needed. Thanks for watching
@@GarageGear Thanks. Great video and tutorial.
Will these work to switch out the jbl tweeters?
I would imagine so but I’m not sure. You can probably check on crutchfield.com thanks for watching!
Hey, do you have the factory premium audio optioned in the truck?
Hey Luke I had the standard audio system with poor sound quality! Non JBL. Thanks for watching!
Thanks for this. I just have one question, do you really still listen to CDs?
Haha I do once and a while! Got some classics! Lol! Thanks for watching!
Where did you get all the speakers...and can you give me the factory kicker numbers to get? I have the double cab. Can't find that tweeter...
I provided links to all the speakers and parts in the description. Thanks for watching Jeffrey! 👍
yea its interesting that for all your links for the speakers and mounts and cables says its not compatible with 2020 tacoma..
Jason DeVos hud Jason! For many months last year, after I purchased my 2019, I found that amazon hadn’t updated their product listings with the current year/model. Double check fittings on Crutchfield just to be sure
In terms of the rear doors, is it the same process for the double cab for the upgrade?
I want to say yes but to be sure check with crutchfield.com. They should provide some instructions for you. Thanks for watching Felipe!
what's the front speaker size goes to the front and the back and the tweeters, im sorry to bother you lol
If you go on crutchfield.com and type in your exact model it will show you the exact sizes you need for each. Thanks for checking out my channel Angel!
You can take out the stock tweets and gut them out and put in any tweeter you want for less then 30 bucks and are better then the kicker I used old school mb quart Germany made and sound so much better the tweeter and the 6x9 are wired in series by factory that is no bueno and cuts the power in half u are better getting a passive crossover
Thanks for sharing this Jim! 👍
Will the tweeters work in a 2020 non JBL Tacoma? My friend has a 2020 TrD Pro with JBL STOCk- and it did not work without splicing.
I would be believe so yes but to be sure you can contact crutchfield.com and double check before you get started! Thanks for checking out my channel John!
Is it the stock 7 inch head unit?
Yes that head unit is stock! Thanks for watching!
What size are the factory tweeters?
Not exactly sure! sold them as soon as I took them out and installed the new ones. Thanks for watching!
Can the tweeter only be plugged in one way?
Yes it only clicks on one way! Thanks for watching!
Did you have the JBL or non JBL system?
The Strength Doc I have the stock non JBL system. If you have a jbl system you may have to take a slightly different route. Thanks for watching!
What was the part# for the replacement of the speaks?
Not sure but you can probably search it on crutchfield.com! I also have the item linked in the description. Thanks for watching!
Did you unhook the positive or negative terminal on your battery?
I unhooked the positive terminal.
Hey the link takes me to a 6 and 3/4 inch adapter for the rear speakers, but the speaker is a 6.5”..... are they cross compatible?
I believe they maybe but you can confirm your exact fit on crutchfield.com . Thanks for checking out my channel Tony!
Thx! Gotta do it, wife would like better than stick sounds :-).
This mod will definitely clean up the sound quality for sure! Thanks for checking out my channel!
The wire harnesses that you have linked state they won't work for my 2020 Tacoma. Any others?
For the tweeters or the speakers! There was no harness for the tweeters. Let me know which one you’re working on!
For the speakers. From the links.
@@tjbreese630 I double checked the wiring harness and it’s saying that my own link will not fit my 2019 Tacoma. Seems weird because those are the ones I used! You can go on crutchfield.com and double check the product numbers to find a match. Let me know how this works for you.
Would have been great if my 2016 tacoma had the same connector. Mine is not compatible with Subaru tweeter.
Can you splice some wires?
It worked just fine on my 2016. If you have a JBL system it's a different connector
@@mikeylikezit86 thanks for sharing MP!
@@mikeylikezit86 do you know what connector??
Done - thanx for the video.. 👍
Walter good to hear! Enjoy the new sound!
Will these fit a 2018 TRD with JBL factory system?
Sorry not sure about the JBL! Honestly you’d have to get in there and see first hand. Stock speakers definitely! Thanks for checking out my channel!
will this fit a 2016 toyota tundra?
You’ll have to go on crutchfield.com and check with your exact model to see if they’ll fit. Thanks for checking out my channel!
You definitely want to takeoff the coverof a frame first I tried it and broke one of the mounting tabs on the speaker grill and it’s easy enough to do why not just do it
You’re right! It’s not worth the risk! Just easier to remove that panel. It’s only a couple bolts.
What is the model number for the tweeters?
Check the product link in the description! Thanks for watching!
Is there a way to do it without taking apart the pillar?
I think it can be done but it’s a lot harder! You’re better off removing the pillar. It’s not hard to do. If you skip the pillar I believe your have trouble putting the cover back on. Thanks for checking out my channel!
@@GarageGear I got mine installed today! Thanks for the tips
@@zonloe3268 awesome my friend! How’s the sound improvement?
Tweeter model please!!!
Got it linked in the description for you!
@@GarageGear thanks!!!
where can you get the tweeters from??
Riley Gore there’s a link in the description!
thank you!
What model and year is your Tacoma?
Bill Seiss hey Bill, I drive a 2019 TRD off road! Thanks for watching!
Holy shit!!Best 100 bucks I spent on my tacoma so far. I just installed these tweeters on my 2021 tacoma and it makes a HUGE difference. Do you think the door speakers are worth it also? Great install video. Just subscribed!
Awesome! They do make a huge difference! I would definitely recommend installing new door speakers! You’ll be blown away with the improved sound quality. The stock speakers are garbage. Let me know if you put the new ones in and how they sound Wes! Thanks for checking out my channel!
I just bought these tweeters and my stock tweeter connection are different than yours. On my 17 tacoma
Hmmm… I wonder if you can double check your connections on crutchfield.com to see which ones will fit your model. Do you have the JBLs?
Link to tweeters
First link in the description. Thanks for watching
Deym. Ipod classic.
Oh yeah we go way back in my truck! Lol
Suggestion: test the speakers before you put everything back together.
Everything works great 👍! Thanks for looking out for me! Thanks for checking out my channel!
I installed the whole set of speakers and tweeters. The exact same model. And it sound really bad. I was wondering if you guys noticed the same and if any of you had to install and amplifier. In my opinion sound is very distorted
The sound should be much clearer. Did you install the same kicker speakers/tweeters? Or another brand? We’re they plug and play?
@@GarageGear yeah, same kicker speakers and tweeters
@@AndresScarsellaIacobozzi not sure what the story is but perhaps you could take it to a speaker shop and ask them to see if there’s an issue.
Hey man! So I did a ton of research and it seems like you need the Entune Premium Headunit for the speakers to properly work. If you only have Entune (base) or Entune Plus , you would need in addition an amp to adequately feed the speakers. Not sure if this is your problem, but this could be the reason why the same speaker setup does not sound good in your circumstance
@@never_arrive hey man! Thanks for the reply! How can I check the entune version that I have? My truck has all the premium packages
10mm socket
Thanks for watching trey!
My fat ass wouldn't even try. Great video!
Whitie in Vermont I bet you could do this in your vehicle bud! What kind of vehicle do you drive? Usually tweeters are just a couple of screws. Panels can be a pain in some vehicles.
@@GarageGear I drive a 2010 Subaru Legacy. I've owned it for around 7 years now and I've always wanted to put in my Sirius XM satellite receiver but I don't have the ability to add it without taking the dash apart and part of the center console. I don't have a audio input in the front of my factory radio. Plus I need to put a wire harness to replace my factory stereo with something new. I have the harness but after researching it I was overwhelmed and said screw it. I'm to cheap to pay someone $200 to do the installation on top of paying for the equipment. I have a lifetime subscription to Sirius and I can install three times in a lifetime before my lifetime is null and void.
@@GarageGear plus I weigh almost 300 pounds. LOL
Whitie in Vermont I hear ya bud! Some vehicles are more complicated than others. I know I’m keeping this truck for a while so I figured this would be good to do now! Did you ever search out TH-cam videos on the install?
@@GarageGear I did research years ago. Maybe I'll do another search. I don't know how much longer I'll have my 10 year old vehicle. I was surprised that I've had it this long. Maybe I should just pull the trigger and do it. I'm sure that there's a lot more videos on how to do it now on TH-cam.
Before 2:23 after 11:43
Hey V! Did you have a question about these time stamps?
Thanks for the commercials
I don’t pick ‘em! Lol Thanks for watching! 👍