Hey there love this channel and seeing all the work you are doing. I own a 40, 55, 62, KZJ78 Prado, and daily drive a BJ75 Troopy. Can’t wait to see the videos to come!
The lock nuts that where getting stuck are splined anti theft style they use a special socket. Just to help you out... my 4th gen had them and I chunked them in the trash and got regular ones
just came across thisthis video love what you did with the rear end with the tire mount and the gas can mount can you give me information on those products and also the front bumper you have on this 60
first time seeing your LC video; I have a 1988 HJ61. Im getting ready to replace the factory radio, and want to add an amp, new speakers....just seeing what you have in yours; Mine is in the Philippines....but going over when they open up to live there and get the radio work done... in Florida presently.
Hey bud, nothing special at the moment, just an upgraded pioneer head unit. Although I have been thinking about upgrading to a unit with a pop out screen that would integrate with google and Gaia maps
I love this Land Cruiser. Looked at buying a new 200 series and putting lift on it but might buy something like this instead. Daily drive a 1996 3x locked 80.
Just get a longer parking brake. Easier option vs changing a major component. I'd definitely try to keep that center console in.. That is one of the few complaints I have with the landcruiser
Awesome to see you have a youtube channel! Definitely going to subscribe. I met with you 2019. I look forward to see what all you do so I can keep an eye on what to do on my fj60. Also, are those the level 8 tracker rims I saw around the beginning?
Yes old man emu shocks and OME Dakar springs with Man-a-Fre rear shackles and front sway bar links. Also has a Man-a-Fre shackle reversal. I think it’s 2” but not 100% sure
Wow...what's up with that dry rot on those Nitto tires? That's some poor quality. What torque spec you using for the lug nuts? Nice cruisers! You keep mentioning SAE sizes for everything (I know..along with metric) ...you shouldn't be using anything but metric...yeah it might fit but it's not what is specified to use.
Thanks, yeah I try and mention both just so others have an option if they don’t have metric on hand. Nitto make some good tires, but these were old and I think had been baking in the Cali heat for a while! I usually go 90-100lb-ft on the lug nut torque. Thanks for watching!
Hey there love this channel and seeing all the work you are doing. I own a 40, 55, 62, KZJ78 Prado, and daily drive a BJ75 Troopy. Can’t wait to see the videos to come!
Thanks brother! Appreciate the kind words
The lock nuts that where getting stuck are splined anti theft style they use a special socket. Just to help you out... my 4th gen had them and I chunked them in the trash and got regular ones
Good catch! After I filmed this episode I found the lock nut key buried in the truck 🙄 Oh well live and learn LOL
Bad ass rigs, right there!! Way to go, MCC!
Thanks dude!
just came across thisthis video love what you did with the rear end with the tire mount and the gas can mount can you give me information on those products and also the front bumper you have on this 60
first time seeing your LC video; I have a 1988 HJ61. Im getting ready to replace the factory radio, and want to add an amp, new speakers....just seeing what you have in yours; Mine is in the Philippines....but going over when they open up to live there and get the radio work done... in Florida presently.
Hey bud, nothing special at the moment, just an upgraded pioneer head unit. Although I have been thinking about upgrading to a unit with a pop out screen that would integrate with google and Gaia maps
O you are the one with 12ht engine looks good man can wait for hj45 running great video I still looking for my 12ht man
I love this Land Cruiser. Looked at buying a new 200 series and putting lift on it but might buy something like this instead. Daily drive a 1996 3x locked 80.
Do it! Something epic about daily driving the old iron
Just get a longer parking brake. Easier option vs changing a major component. I'd definitely try to keep that center console in.. That is one of the few complaints I have with the landcruiser
Got my sub. Just picked up HJ61. Helpful content. Thank u.
Thank you!
Awesome to see you have a youtube channel! Definitely going to subscribe. I met with you 2019. I look forward to see what all you do so I can keep an eye on what to do on my fj60.
Also, are those the level 8 tracker rims I saw around the beginning?
Hey Devin thanks! They are very similar but these are actually Mojave rims. Cheers, hope to bump into you again soon 👍🏻
You guys still active? I live in nash & got a 60 series
The rig looks great. Which seat covers are you using?
Enjoyed video. Thanks for part number...preferred vendor? Also non-related but do you happen to konw where the blinker relay is located on the FJ60?
Thanks Carl. I just got them from Amazon. The turn signal relay should be under the dash on the drivers side to the left of the clutch pedal.
Nice clean rig, I had the 3f in mine but now its got a 12ht, it's like having 2x 3f's with half the fuel consumption.
lol exactly! And you cant beat that exhaust note!
I like your car bit do you know by chance what the bumber is
How did the LED lights work out for you? I just installed the Kioto H4 headlights and am not impressed with the illumination.
Nice rig. Who makes your front bumper?
4plus front, rear and sliders
did you need to use spacers on the wheels with running 33x12.5 tyres?
Enjoying the videos. I’ve just bought a 60 series and am in the planning phase. What type of bull bar do you have on your 60? I like the look of it
Thanks! It’s a 4plus bumper. Check out www.4plusproducts.com
Hey there what off set are you running.
my FJ60 under restoration whats the tyre size
could you do a walk around of the 60 and point out the mods that have been done? looking to do something similar with mine.
I pretty much covered everything in the video, was there something specific you wanted to see or know more about?
tyres size plese
@Music, what’s rims and offset are you using on the FJ60. Would a -45 offset work? 10J without touching Tie rod ends
Which console did you use?
Its made by a company called vertically driven. There is a link to it in the description. Thanks for watching!
to be honest I liked the LED headlights more
Ahh niceee ..I think I follow you on IG
What size lift kit are you using on the fj60? Is it an old man emu 2 inch?
Yes old man emu shocks and OME Dakar springs with Man-a-Fre rear shackles and front sway bar links. Also has a Man-a-Fre shackle reversal. I think it’s 2” but not 100% sure
@@musiccitycruisers3863 thanks so much!
Nice 60 :)
How much clearance do you get from the ground to the bottom of the fj60 with 33s on?
I can measure that for you, but I’m running 35s now.
Ok, it’s not a big deal. Thanks!
Still got the old center console you pulled before replacing? :)
I do!
@@musiccitycruisers3863 cool! I’ll send you a DM on IG!
Wow...what's up with that dry rot on those Nitto tires? That's some poor quality. What torque spec you using for the lug nuts? Nice cruisers!
You keep mentioning SAE sizes for everything (I know..along with metric) ...you shouldn't be using anything but metric...yeah it might fit but it's not what is specified to use.
Thanks, yeah I try and mention both just so others have an option if they don’t have metric on hand. Nitto make some good tires, but these were old and I think had been baking in the Cali heat for a while!
I usually go 90-100lb-ft on the lug nut torque. Thanks for watching!
How did you paint your grill black?
That was painted with a bed liner. Has a textured finish to it
@@musiccitycruisers3863 ok, cool!
How did you lift your truck
OME springs and shackle reversal
Your accent is confusing.
Thanks, I like to bring a little mystery to the channel! 😂