@@OwenBuckingham11 they are decent size yeah. Im a 3d printer enthusiasts and have my own small channel. I have a couple larger printers around that size as well.
This is perfect timing. I was brought a sub and amp the other day and was really debating whether I wanted to install it in my car, as I don't want to change the factory unit. (Steering wheel controls or bust I guess..). Just gotta get myself a high-low converter now.
I did the exact same thing to my 2020 custom. It really made a big difference . I used a Cadence 10” powered 400 watt woofer box. My Truck is the Same color by the way.
JL Audio makes a stealth box for it, I just ordered it. For the crew cab you choose between 2 12s or 2 10s. the double cab you can only get the 10s. Also LLJ customs makes a harness so no splicing required and it will pull all 4 speaker outs with up to a 20 foot length. the harness plugs between the factory harness and the stereo unit behind the glove box, and it even has a remote out for the amps. LLJ customs will also include the signal processor for RCA outs if preferred. FYI.
go to a audio store and get your amp tuned for the new truck, rather safe than sorry, and you may actually be leaving power on the table if its tuned to low.
Okyou need to shorten the wires of the ground and power down to the shortest you can get, helps get rid of cords but also helps the amp get better power and earth connections that helps with the sound.
Turn down the Bass on you stereo so you can turn up the volume and then turn up the bass boost on the amp to compensate for the bass loss on the head unit. It's an old trick we used to do in the 90's. We would turn the bass all the way down to -10 and then turn up the gain and bass boost on the amp. U need to play around with the bass on the head unit by turning it down 1 notch at a time and turning up the volume till it's as loud as it goes without distortion. Distortion is the killer of speakers and ears. Loud and clean sound wont kill your hearing. Also, what you could do is replace the amp with a AudioControl and use the accubass to compensate factor head units. Factory head units decreases the bass the louder you turn up the volume so you can't blow the factor speakers. Check out - Install Diaries - and he explains it in a lot of his videos.
As an electrician I have to admit that should maybe put some sort of protecting tube or the fabric tape they put on Stock wiring so you get no short circuits due to the wires rubbing or vibriting under the panels😮
You should ask thomas to make a certain trim piece in your car have the committed logo on it, and have the same trim piece in every car to symbolise it's yours. Kinda like the banners but more custom.
I really wana get my subs hooked up in my new car. i got a 2014 mazda 3 hatch, and i have dual 12 inch skar audio subs pushing 1500 watts peak 1000rms to go in. they bumped really hard in my old car, but i really dont want to splice into my wires myself lol
You can not get the same sound as a single cab truck. I had an 04' ranger with a single 10" rockford fosgate p300. that thing just hits way different than my 4 kicker comp 12's in my sequoia
I can’t get over how smol little Robbie looks in the intro I’m dying I guess the trucks in America really are huge
Yes.
Gone are the little trucks it's quite sad really
Maxxas Crow yeh just watched the donut media video
He doesnt live in America. He lives in Canada Eh.
@@themangomachinegun660 still an American truck...
THE MANGO MACHINE GUN actually he does live in America lmao...Canada is in North America! He just doesn’t live in the UNITED STATES.... 🤦♂️
how big is his printer? seems fairly large as that looks like one piece mostly
That should be able to fit on like a cr10 300x300mm or 400x400mm printer
@@chefjacobs3dprintz564 yeah probably a cr10 or similar style, they are massive
@@OwenBuckingham11 they are decent size yeah. Im a 3d printer enthusiasts and have my own small channel. I have a couple larger printers around that size as well.
Follow him on youtube and Instagram he's quite creative
Yo Robbie can you link the converter I’ve tried a few but they didn’t work.
Same here, music is super important...whereas all the cars that I owned had upgraded sounds, for me, it's a must.
Agreed
In the beginning I thought the s10 build was gonna start 🤦♂️ 😂
Nope, just ripping more shit out of it
8:42 he said this guy has a little weewhoo (whistling) that got me🤣
Is that the BRZ on the trailer going for it’s tune👀?
Need those windows to be tint and change those mirror for a tow one !!!
thanks for making my day better
I’m so glad that came out durring my last period class cause I hate this class and this just made it a lot better
Lol
This is perfect timing. I was brought a sub and amp the other day and was really debating whether I wanted to install it in my car, as I don't want to change the factory unit. (Steering wheel controls or bust I guess..). Just gotta get myself a high-low converter now.
I did the exact same thing to my 2020 custom. It really made a big difference . I used a Cadence 10” powered 400 watt woofer box. My Truck is the Same color by the way.
Kicker subs sound badass i got myself 2 12 inch subs on my truck and the sound is insane
Where did you buy that converter for the amp
I have the same truck just different color and its in the shop rn getting a 6 inch lift im pumped and i have 2 12inch subs in it and it sounds great
JL Audio makes a stealth box for it, I just ordered it. For the crew cab you choose between 2 12s or 2 10s. the double cab you can only get the 10s. Also LLJ customs makes a harness so no splicing required and it will pull all 4 speaker outs with up to a 20 foot length. the harness plugs between the factory harness and the stereo unit behind the glove box, and it even has a remote out for the amps. LLJ customs will also include the signal processor for RCA outs if preferred. FYI.
whats the device called that converts the speaker cables to the cables the amp takes haha ?
Glad to come home to a Robbie vid after work, that sub looks so clean in there!
Lol I've been trying to hook up my old subs to my new vw and you install the exact speaker converter I've been looking for!
What is the converter box called btw
what size tires are on the silverado and what kind of wheels you running
Where did you take remote and RCA?
What color of wire did you use to tap into the door speakers?
Damn,this the best vid I could watch on a rainy day😄
Can you send a link to the adapter you used to split the speaker wire?
Gas or diesel for towing a car?
How did you run the remote wire
where'd you buy it? 2:08
Did u keep the stock speakers? What brand sub did u use?
love your cars
Woke up literally as this video dropped I but your teal stay committed tee and here we are💪🏻
Great work on the truck you got many cars to work and n now.
When you working with the ek or get the dyno done?
Best system install vid ever
Love your videos keep up the good work
I just got out of military basic training for the U.S Air Force and I’m sooo behind on all these videos
keep up the great work. Love my mint tee!
Literary muted my online class to watch this video an it was kinda worth it
Is that stock with Bose ?
Clean install👌
I got a 2019 hyundai veloster and i had to run a separate radio because it burned the amp of my factory radio. But then again i have 2 15 inch subs
can you image how dope vlogmas is gonna be this year
what wheel/tire size are you running? do they rub? just installed the 4" lift on mine and got the airlift bags (not installed yet)
Love your videos
What sub setup is this and how much does it all cost
Great amp I had mine for 8 years now
Great video
Stay Committed!
Hey Robbie from one truck guy to another, they sell like angled ladders that really help you reach into the engine on the truck look it up
go to a audio store and get your amp tuned for the new truck, rather safe than sorry, and you may actually be leaving power on the table if its tuned to low.
Im still rockin a 13 yr old 10" kicker solo baric... no shame.. 🤙
Also, If you need storage for truck stuff, check out decked systems
anyone know if this will fit under the rear seat of a 2007 Extended Cab GMC Sierra 1500?
ill love your videos no matter what robbie. amazing sub missed that thing
Is it dyno day yet?
Thanks for the great vid man
For the audio do not use bass boost the lpf put it at 100 and turn off subsonic filter
Heads up I know some chevys came with little subs mounted in the glove box, its easy to wire into those too. good work!
My 2019 Trailboss LT has a stock Bose 8" sub under the center console
Loved it
Yes it’s a good day when the first song I hear robbie play is bbno$
Clean! New subscriber! 🍻💯
Okyou need to shorten the wires of the ground and power down to the shortest you can get, helps get rid of cords but also helps the amp get better power and earth connections that helps with the sound.
Alright getting into systems now fa sho my type of work
Mannn I love being early on a Robbie vid
Short king of the year
I have that same sub but the box came apart and sounded terrible
Aww that subs is so cute 🥰
You should upgrade your door speakers also to kickers components....
Seriously how much OTD for your Chevy?
Yooooo more ek partsssss
Nice
Turn down the Bass on you stereo so you can turn up the volume and then turn up the bass boost on the amp to compensate for the bass loss on the head unit. It's an old trick we used to do in the 90's. We would turn the bass all the way down to -10 and then turn up the gain and bass boost on the amp. U need to play around with the bass on the head unit by turning it down 1 notch at a time and turning up the volume till it's as loud as it goes without distortion. Distortion is the killer of speakers and ears. Loud and clean sound wont kill your hearing. Also, what you could do is replace the amp with a AudioControl and use the accubass to compensate factor head units. Factory head units decreases the bass the louder you turn up the volume so you can't blow the factor speakers. Check out - Install Diaries - and he explains it in a lot of his videos.
Not the vid I was hoping for but hey it’s Robbie and he has fun on his channel meaning he’s unpredictable and that’s fine #staycommitted guys 🤞🏼
너도 내가
Thomas is so creative I follow his TH-cam and Instagram
As an electrician I have to admit that should maybe put some sort of protecting tube or the fabric tape they put on Stock wiring so you get no short circuits due to the wires rubbing or vibriting under the panels😮
i have the same kicker 😂
Tool box and tonneau cover combo is the only way to go
i was wating for this video haha
U should build that corvette
Also the reason that thing throwing so much bass is vuz u have a 1000watt amp on a 300watt sub
Replace the kicker with a shallow rockford power series sub and you'll get much warmer tone and more output
Do more audio installation💯
Notification squad ❤️🔔
you should get 2 sounddown speaker and a special box for the truck its gonna smack
Saw a post came and liked
that's crazy, that's just 1 10inch sub, in a 4 door truck, I had 2 12's in a single cab ram & still wasn't enough for me lol
You should ask thomas to make a certain trim piece in your car have the committed logo on it, and have the same trim piece in every car to symbolise it's yours. Kinda like the banners but more custom.
Bbno$ again. Love it
Are you Canadian???
Super early notification squad
I really wana get my subs hooked up in my new car. i got a 2014 mazda 3 hatch, and i have dual 12 inch skar audio subs pushing 1500 watts peak 1000rms to go in. they bumped really hard in my old car, but i really dont want to splice into my wires myself lol
So robbie you should have done 50hz tone to your speakers to see what one had more bass in your speakers
You should get the Leather steering wheel for the Silverado
You should put a cb radio + radar jammer in ur cars
I'm so early saw this in my sub box and you know i had to click on it
i can wait for the brz dyno video, on the stories it sounded good
Seems like you always get caught up in wiring as a somewhat colorblind fella 😂
First mistake was going with kicker.... Should've went skar or sundown
You can not get the same sound as a single cab truck. I had an 04' ranger with a single 10" rockford fosgate p300. that thing just hits way different than my 4 kicker comp 12's in my sequoia
aw man installing a subwoofer and amp... never thought itd get this run of the mill lmao
ROBBIE WE NEED WALLPAPERS!!!!
Thats a nice sub for a stock truck. 300 watts is plenty.
I thought he had the underseat storage/ safe option
Buy the oem bose speakers for your truck.