Very great video 😊 Can you do a tutorial on how to download the firmware and on the wiring I’m conferring buying one but I want to make sure that I understand everything before making this big purchase thank you again and I love your content keep up the amazing work
This is my question too. The Kirigami I got in a Formbot kit was not straight but I was able to straighten it with just my fingers. This is both good and bad. Good because it is easy to fix a poorly made part but bad because it was so weak I could bend it with just my hands. My guess is that the Fysec CNC part will be 100 times more rigid than the Kirigami. That said, there are Kirigami parts made with steel that are much stronger and some better aluminum ones too. I should have the CNC part by the end of the month.
My fysect cnc bed mount came today. Seems to be well made, looking to install in the next few days. Defiantly seems much more rigid @@chrisalbertson5838
I have a couple V0s from fysetc kits and i didn't need to solder anything to assemble, had the same experience with my fysetc trident kit ordered a 2.4 kit some days ago and it's on the way, from what i checked, i will have the same experience. All the Wires came in the correct lenghts on the kits that i received.
They're the makerbeam style, with the T shaped slot. annodization layer seems thicker / more robust compared to some of the cheaper frames we've seen, didn't scratch easily. They were all straight, and equal lengths. no complaints. I will say the panel fitment was a little bit more finicky than we're used to. everything went together well enough, but it would have been easier if the panels were undersized by 0.1mm or so. they were tight.
I have a 2.4 and looking at this one for some time just havent pushed the button.. opinion pieces like this do make it harder to resist [L]augh [O]ut [L]oud
bro;] the problem ison my laptop even after installing ch340 divers and doing everything my 1 of the printer board port and bords hav no sign in my laptop. but my privous marlin octa file in still in printer board.😅
I bought a portable input shaper from them, it uses an RP2040 and is pretty nice in my instance, so far they seem pretty nice
The CNC machined, powder coated bed frame is really nice. Much nicer than a Kiragami bed frame IMO.
It sure is!
With the winter sale going on now and coupons/coins I pulled the trigger. $367usd shipped to the US after tax
Enjoy the build!
@@MapleLeafMakers Thanks, ordered with the ABS parts, I hope they are up to snuff
Very great video 😊
Can you do a tutorial on how to download the firmware and on the wiring I’m conferring buying one but I want to make sure that I understand everything before making this big purchase thank you again and I love your content keep up the amazing work
Yes, soon
Shipping cost to canada abit high on your link ?
Did you notice any difference between the Fysetc CNC bed mount vs Kirigami?
This is my question too. The Kirigami I got in a Formbot kit was not straight but I was able to straighten it with just my fingers. This is both good and bad. Good because it is easy to fix a poorly made part but bad because it was so weak I could bend it with just my hands. My guess is that the Fysec CNC part will be 100 times more rigid than the Kirigami. That said, there are Kirigami parts made with steel that are much stronger and some better aluminum ones too. I should have the CNC part by the end of the month.
My fysect cnc bed mount came today. Seems to be well made, looking to install in the next few days. Defiantly seems much more rigid
@@chrisalbertson5838
0:15 😂😂 the sincerity
I bought the same kit. Also having trouble with the wifi option. What was your solution in the end ?
We had to add the wifi credentials directly to /etc/network/interfaces in order to have it connect on startup.
Thanks for posting. Your Aliexpress link is broken FYI
Updated
regarding the wiring, has any oner ordered a 2.4 kit and had the same experience? With having nothing to crimp, and having it all perfect?
I have a couple V0s from fysetc kits and i didn't need to solder anything to assemble, had the same experience with my fysetc trident kit
ordered a 2.4 kit some days ago and it's on the way, from what i checked, i will have the same experience. All the Wires came in the correct lenghts on the kits that i received.
What a neat printer! However, unless I'm mistaken they are called FYSETC, not FYSTEC.
Wow, at least the thumbnail was correct! Thanks for pointing that mistake out.
Nice video !!
How are the extrusions? My V0 is an original V0 Formbot kit and the extrusions is a lot softer then my friends LDO kit.
🍻
They're the makerbeam style, with the T shaped slot. annodization layer seems thicker / more robust compared to some of the cheaper frames we've seen, didn't scratch easily. They were all straight, and equal lengths. no complaints. I will say the panel fitment was a little bit more finicky than we're used to. everything went together well enough, but it would have been easier if the panels were undersized by 0.1mm or so. they were tight.
I have a 2.4 and looking at this one for some time just havent pushed the button.. opinion pieces like this do make it harder to resist [L]augh [O]ut [L]oud
Haha, thanks! Enjoy your (eventual) V0 build!
Biased impressions/opinions are the only impressions/opinions
exactly! this is the first video we've made that sort of resembles a review, and we wanted to be very clear about it.
hey, there I back with a problem.😂 funny tho.
bro;] the problem ison my laptop even after installing ch340 divers and doing everything my 1 of the printer board port and bords hav no sign in my laptop. but my privous marlin octa file in still in printer board.😅