Wow I did not expect to see the JAM supported that quickly by your DrivenByMoss extension after reading the requests in the KVR thread a few weeks ago. Thanks so much I will never sell mine ^^
Hallo Jürgen, danke Dir sehr... Deinen Editor für den JV-2080 fand ich schon vor mehr als 20 Jahren als sehr hilfreich, und hatte da auch mal kurz Kontakt mit Dir. Deine Scripts für Controller mit Bitwig verfolge ich nun auch schon ein paar Jahre. Lustig, seit einem Jahr arbeitete ich jetzt eigentlich nur noch mit Cubase Pro, und mußte Bitwig in den letzten Tagen wieder öffnen, um Midi/Audio Routing für den VS Synth von Imaginando zu ermöglichen. Ich wollte dann die Parameter mit den Smart Strips der Maschine JAM steuern, hab's aber so nicht hingekriegt... Da kam mir Dein Video vom Mai wieder in den Sinn. Habe Dein Script geladen, sowie das Template für den Controller Editor, und bin jetzt völlig fasziniert von Bitwig und Maschine JAM... vielen Dank dafür, und für Deine stets professionellen und unterhaltsam gestalteten Videos!
Maschine JAM is the best controller with "8" effect strips, so sad NI stopped making the JAM. May be people can show some interest in the JAM. ASK NI to make some more?
I wish the Jam worked on Linux! Got one doing nothing since dropping Maschine software, but enamoured with the idea of routing Bitwig into something like Reaper as an "external instrument".
There is an open source driver available on GitHub. However the mapping is quite different to the one on Windows/macOS and some things do not work. Nevertheless, it should be sufficient to get some use out of it with e.g. Generic Flexi.
everyone, no exception, likes the jam. I have one an it's sucha cool controller. On NI forums and Maschine Beta forums everyone and their mother asks them to keep supporting it, but it looks like the market spoke louder? Or bad decision from NI? Thank you for the script
As default it is Shift+Record but you can also configure it to be Record only (see the settings). Furthermore, you can configure it on the session grid as well.
Hey this is way far away of my mind! Great! What do you think about For Maschine Software To use LaunchPads or LaunchKeys as Maschine Hardware do it natively like this video? Anyway good job!
I am not sure if I understood your question. You are asking if you can use other devices with the Maschine software? There is some basic MIDI mapping you can do but this is not really deeply integrated.
@@mossgraber thx. Yes I know it but not deeply integrated something like Sequencer/Scene or Pattern controlling. Just asked if you don’t mind to. one more question, what about JAM for Reaper on DBM12.x ? Hope it could go on next time.
Hallo, gibt es eine Möglichkeit das es auch unter Linux funktioniert? Man bekommt unter Linux ja die Fehlermeldung "Maschine is not supported on Linux since there is no Native Instruments DAW Integration Host."
Looks good to me (besides the fact the the collections column is currently not available, this needs to be adapted by Bitwig to the new browser). What's the issue?
Me again, sorry for the bother... now that I had a few days playing with it, here are two opportunities for improvement....been using Marc's script as a base line, so I am not coming from the Bitwig/NI factory script - github.com/marctdt/Bitwig_MaschineJam - The pads don't light up when clips are selected, which is unpractical. And for esthetics... I am not a big friend of the current track having all unused pads light up red. When my track color is red, it looks like all clips are filled.
Seems I forgot to implement the blinking of pads, therefore play and select states are not visible. Will be fixed in the next update. For the recording states I remember the discussion with Push :-) Will add the same option!
Thank you, Jürgen, for all the good work you put into the Bitwig community. Your efforts and the quality of your work is much appreciated!
I dont own a maschine controller, but thanks for all your hard work ♥
Wow I did not expect to see the JAM supported that quickly by your DrivenByMoss extension after reading the requests in the KVR thread a few weeks ago. Thanks so much I will never sell mine ^^
Ooooh snap. Moss strikes again! Awesome job, sir. I was surprised to not hear the crazy fun music intro on this video. :)
The JAM deserved a JAM :-)
Fantastic, many thanks for all the time you put into these scrips! Good opportunity to put the Jam back on the desk.
Truly amazing work sir. This is as good as it gets without a doubt. Huge thanks!
Hallo Jürgen, danke Dir sehr... Deinen Editor für den JV-2080 fand ich schon vor mehr als 20 Jahren als sehr hilfreich, und hatte da auch mal kurz Kontakt mit Dir. Deine Scripts für Controller mit Bitwig verfolge ich nun auch schon ein paar Jahre. Lustig, seit einem Jahr arbeitete ich jetzt eigentlich nur noch mit Cubase Pro, und mußte Bitwig in den letzten Tagen wieder öffnen, um Midi/Audio Routing für den VS Synth von Imaginando zu ermöglichen. Ich wollte dann die Parameter mit den Smart Strips der Maschine JAM steuern, hab's aber so nicht hingekriegt... Da kam mir Dein Video vom Mai wieder in den Sinn. Habe Dein Script geladen, sowie das Template für den Controller Editor, und bin jetzt völlig fasziniert von Bitwig und Maschine JAM... vielen Dank dafür, und für Deine stets professionellen und unterhaltsam gestalteten Videos!
Maschine JAM is the best controller with "8" effect strips, so sad NI stopped making the JAM. May be people can show some interest in the JAM. ASK NI to make some more?
I wish the Jam worked on Linux! Got one doing nothing since dropping Maschine software, but enamoured with the idea of routing Bitwig into something like Reaper as an "external instrument".
There is an open source driver available on GitHub. However the mapping is quite different to the one on Windows/macOS and some things do not work. Nevertheless, it should be sufficient to get some use out of it with e.g. Generic Flexi.
Holy crap this is awesome
Mal wieder sehr cool umgesetzt 🌻 Das regt dann doch sehr das "Habenwill" an, als zusätzliche Option ... 🎊
Gibt's momentan sehr oft und günstig auf eBay... :-)
thank you!!!
everyone, no exception, likes the jam. I have one an it's sucha cool controller. On NI forums and Maschine Beta forums everyone and their mother asks them to keep supporting it, but it looks like the market spoke louder? Or bad decision from NI? Thank you for the script
not sure if i'm being stupid but whats the command for "New Clip" ? cannot find it in the manual.
As default it is Shift+Record but you can also configure it to be Record only (see the settings). Furthermore, you can configure it on the session grid as well.
hi great scripts just a quick question could a video showing it working with reaper
It is basically identical. The differences between Reaper and Bitwig are explained in detail in the manual (section 3.2).
Hey this is way far away of my mind! Great!
What do you think about For Maschine Software To use LaunchPads or LaunchKeys as Maschine Hardware do it natively like this video?
Anyway good job!
I am not sure if I understood your question. You are asking if you can use other devices with the Maschine software? There is some basic MIDI mapping you can do but this is not really deeply integrated.
@@mossgraber thx. Yes I know it but not deeply integrated something like Sequencer/Scene or Pattern controlling.
Just asked if you don’t mind to.
one more question, what about JAM for Reaper on DBM12.x ? Hope it could go on next time.
Hallo, gibt es eine Möglichkeit das es auch unter Linux funktioniert? Man bekommt unter Linux ja die Fehlermeldung "Maschine is not supported on Linux since there is no Native Instruments DAW Integration Host."
Leider nein.
panorama? is it not panning?
It can do panning. See the manual for details.
Browser not working in bitwig 5??
Looks good to me (besides the fact the the collections column is currently not available, this needs to be adapted by Bitwig to the new browser). What's the issue?
Can you make a notation launch pad pro mk3 template for Mac 🖥?🙏🏿
Like this? th-cam.com/video/mkpu-Na5rVM/w-d-xo.html
Me again, sorry for the bother... now that I had a few days playing with it, here are two opportunities for improvement....been using Marc's script as a base line, so I am not coming from the Bitwig/NI factory script - github.com/marctdt/Bitwig_MaschineJam - The pads don't light up when clips are selected, which is unpractical. And for esthetics... I am not a big friend of the current track having all unused pads light up red. When my track color is red, it looks like all clips are filled.
Seems I forgot to implement the blinking of pads, therefore play and select states are not visible. Will be fixed in the next update. For the recording states I remember the discussion with Push :-) Will add the same option!