Very good - went just like you demonstrated and worked 100% - THANK YOU! Also - if for those who don't have the Torx T 30 screw head you can use a wide flat head screw driver to take the screws out.
I had a garage try to charge me 160.00 to replace my low beam. I'm going to do it myself for 20.00 thank you for sharing and saving this single mom 120.00. :)
Thank you so much! My light went out so I went to auto parts store to get 2 because I know the other will go soon and asked them if they could change it. They said no Ford's are too complicated. This isn't complicated! My Hyndai was worse!
Wow, seems like such a small world. I subscribe to Leah's channel on Poshmark but happened to be watching videos on how to change the headlight bulb on my Focus and came across this video. I said to myself, hey, I know him! Thanks for the video and say hi to Leah!
Different with my Ford Focus 2014. No quarter turns I had to fiddle and pull out the housing for the bulb. VERY difficult to snap it back in as well. Apart from that all ok.
Wait you have to actually take out the entire headlight from the bumper in order to replace such a simple thing as a low beam bulb? That's pretty absurd. Maybe I'm super out of touch but I've never owned a car out of 5 so far that didn't have full access to the back of the bulb to unscrew it as soon as you open the hood.
@@howtorealdeal That's pretty unique. I've worked on a bunch of cars over the years and never seen that. I guess it's all they could do with that reinforcement bar coming across though.
when you remove a headlight the headlight alignment set at ford factory so when remove headlight it out ajustment take for m.o.t see what happen abet headlight to high or to low .
@@carlfpurcell I don't disagree with you as I'm not the expert however I don't see a sense what you say. As you remove the bulb and you click in the new one it literally just clicks right in the exact same place! After it clicks in there is no chance to twigle with it. It stays there solid! Than "if" beam happens to be too high you can control it from inside the car lowering beam up or down. If you have changed just one bulb and not the set and you notice people are flashing you if because one bulb is brighter than the other one. Not because it is out of sink. If you did managed get it out of sink is because you have done it wrong. I'm not having a go at you is just a way I see it.
Why i was told today on my 16 ford focus i got to take my whole grill off to just replace low beam. And this video of the car is just like mine smh! Thanks
Hi, the circle is of the head lamp. The fog light is the round light at the very bottom of the front bumper. I hope this helps. I have not done a video yet on a fog light.
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Thanks for posting. Straight to the point and easy to follow.
Very good - went just like you demonstrated and worked 100% - THANK YOU! Also - if for those who don't have the Torx T 30 screw head you can use a wide flat head screw driver to take the screws out.
I had a garage try to charge me 160.00 to replace my low beam. I'm going to do it myself for 20.00 thank you for sharing and saving this single mom 120.00. :)
A bulb cost €1. A fool and their money are easily parted
Thank you so much! My light went out so I went to auto parts store to get 2 because I know the other will go soon and asked them if they could change it. They said no Ford's are too complicated. This isn't complicated! My Hyndai was worse!
Wow, seems like such a small world. I subscribe to Leah's channel on Poshmark but happened to be watching videos on how to change the headlight bulb on my Focus and came across this video. I said to myself, hey, I know him! Thanks for the video and say hi to Leah!
Yes and you are awesome
Thank you for this video. It is very informative and professional.
Very informative video for a car newbie like me 👍
More tips comming
just what i was looking for, thanks
Thank you for this!
Thank you so much, that is just what I needed.
Thank you. I’m going to try this tomorrow. I hope I dint screw up
I thought this was about the parking light since the arrow points directly at it
Thanks! Just changed both low bulb lights... I ain’t need no man with TH-cam now 🤷🏻♀️
I removed those screws with a power drill flat head.
Do I need to unplug the battery or can I do it with the battery plugged and have no issues.
Different with my Ford Focus 2014. No quarter turns I had to fiddle and pull out the housing for the bulb. VERY difficult to snap it back in as well. Apart from that all ok.
good to know. I have a 2014 and need to replace mine as soon as I buy the bulb
How to replace the fog lights on a Ford Focus 2009
Wait you have to actually take out the entire headlight from the bumper in order to replace such a simple thing as a low beam bulb?
That's pretty absurd. Maybe I'm super out of touch but I've never owned a car out of 5 so far that didn't have full access to the back of the bulb to unscrew it as soon as you open the hood.
Yes you have to remove the entire headlight due to the small work room to get your hands into the headlamp to replace the bulb.
@@howtorealdeal That's pretty unique. I've worked on a bunch of cars over the years and never seen that. I guess it's all they could do with that reinforcement bar coming across though.
one bulb change one headlight out of linement dazzle on comeing taffic
I don't understand your comment. Can you explain more please?
when you remove a headlight the headlight alignment set at ford factory so when remove headlight it out ajustment take for m.o.t see what happen abet headlight to high or to low .
@@carlfpurcell I don't disagree with you as I'm not the expert however I don't see a sense what you say. As you remove the bulb and you click in the new one it literally just clicks right in the exact same place! After it clicks in there is no chance to twigle with it. It stays there solid!
Than "if" beam happens to be too high you can control it from inside the car lowering beam up or down.
If you have changed just one bulb and not the set and you notice people are flashing you if because one bulb is brighter than the other one. Not because it is out of sink. If you did managed get it out of sink is because you have done it wrong.
I'm not having a go at you is just a way I see it.
Why i was told today on my 16 ford focus i got to take my whole grill off to just replace low beam. And this video of the car is just like mine smh! Thanks
That's alot different from the 2010
Like a low beam is different from a regular bulb. Funny shit.
You circled the fog light yet no info on how to remove it. Lol
Hi, the circle is of the head lamp. The fog light is the round light at the very bottom of the front bumper. I hope this helps. I have not done a video yet on a fog light.