I see I'm not the only one holding off on getting these darts untill I heard your opinion 😁. Glad to hear they fit the bill. I was getting tired of headhunting after shooting the gen2s
Yes! Once I saw these on Nerf News I couldn't wait to get my hands on them, but I wanted to see a review first, and I knew I could count on your truly amazing videos. Thank you for being a major role in our community and bringing quality content to this site. (Wish I could write thank-you cards like that 😄) In the end, I might end up getting the Adventure Force darts because when I cut them then I can re use the Worker darts I have as well as get some Adventure Force half-lengths for my flywheels.
1. Awesome vid. 2. Love the gen 3 darts. 3. Also love re-gluing darts while watching TV. And I make ammo to play with, without ruining new game darts. I think it's totally worth re-gluing darts even if you run out of darts you have the ones you made just in case. Have a great day and happy nerfing. Thank you for all your work in testing and game play footage.
What i like about them from this test is that they are as accurate as the best out there and not to mention the much improved glue bonding on the heads.
Finally a good factory ready short dart. I already made a crap ton of reglued adventure force foam worker head darts, but when I'm low ik what I'm buying.
Me too. I literally thought "I can't way to see what Bradley Phillips has to say about them." And, TBh, with the general news being good about them, I knew I was going to end up buying some, but I refused to make my decision until I saw this video. Now, I'm off to buy some Gen 3's
Solid informational and helpful testing as always! Glad to hear the glue is nice and solid! I also like that they are just about the same price :) it makes my wallet happy.
Thank you once again for great attention to detail ( and all the post editing work that must go into making such a usefull video) Personally I am wary that this increased detail that Worker are putting in will last. Just from previous experience, businesses often improve a product to gain a consumer following only to drop the quality later on. At least with glueing my own darts I can ensure consistant quality.
After reading the comments, I think Worker should have sent you these for free to test as your opinion has weight in the community. Alot of us were holding off even thinking of buying these untill we saw what you had to say. Then again it's cool that I know you don't have any 'conflict of interest' which I don't think others that get sent stuff to review can honestly say.
I did a test in my swordfish with both. The new workers were better I found but you would make a better vid than I would so I thought I would wait to see your A+ vid on it hahaha
I'm not really a fan of the Terminator. It has priming issues with high spring loads and I don't really like the look of it aesthetically. However if you like high power stuff, I have a Caliburn coming in the next couple of months and a Dart Zone Pro.
@@BradleyPhillipsYT so i have to mod it in order for them to work?Or i have to buy a flywheel gun that can be modded to suit them? Like a stryfe for which many mods exist.I mean which flywheel blasters from nerf can be modded to accept short darts?Not all?Is it a per model thing?Stryfe can be modded because worker has a kit for it and turbine cant be because no kit for it exists yet?
@@BradleyPhillipsYT I'm using a plugged pump Ultimate missle blast with a 8 round rscb and I'm hitting 180 with 9 pumps. I can get 250 but 200 starts to destroy gen 1 darts
So im thinking: -Jet blaster's CEDA spring can fit into Worker Prophecy's spring (25N) -Worker 25N's spring can fit into K26 spring So if u put all 3 of them in one blaster (caliburn) then...lol It might gonna destroy ur blaster before u test it .-.
I see I'm not the only one holding off on getting these darts untill I heard your opinion 😁. Glad to hear they fit the bill. I was getting tired of headhunting after shooting the gen2s
Even the sound of the xzeus 2 makes sound powerful.
Yes! Once I saw these on Nerf News I couldn't wait to get my hands on them, but I wanted to see a review first, and I knew I could count on your truly amazing videos. Thank you for being a major role in our community and bringing quality content to this site. (Wish I could write thank-you cards like that 😄) In the end, I might end up getting the Adventure Force darts because when I cut them then I can re use the Worker darts I have as well as get some Adventure Force half-lengths for my flywheels.
1. Awesome vid.
2. Love the gen 3 darts.
3. Also love re-gluing darts while watching TV. And I make ammo to play with, without ruining new game darts.
I think it's totally worth re-gluing darts even if you run out of darts you have the ones you made just in case.
Have a great day and happy nerfing. Thank you for all your work in testing and game play footage.
What i like about them from this test is that they are as accurate as the best out there and not to mention the much improved glue bonding on the heads.
Finally a good factory ready short dart. I already made a crap ton of reglued adventure force foam worker head darts, but when I'm low ik what I'm buying.
Thank you for doing these reviews! Nerf on and have an awesome day
I've been waiting for this since the day I first saw these
Me too. I literally thought "I can't way to see what Bradley Phillips has to say about them."
And, TBh, with the general news being good about them, I knew I was going to end up buying some, but I refused to make my decision until I saw this video. Now, I'm off to buy some Gen 3's
@@MrGWillickers yeah man sucks I just bought 1000 ten ones like a month ago
Solid informational and helpful testing as always! Glad to hear the glue is nice and solid!
I also like that they are just about the same price :) it makes my wallet happy.
I wished the gen 3 darts have more variety of colors.😅
The gen3s came apart after a while. I would recommend adventure force short darts for better durability. They could be harder to find though.
Thank you once again for great attention to detail ( and all the post editing work that must go into making such a usefull video) Personally I am wary that this increased detail that Worker are putting in will last. Just from previous experience, businesses often improve a product to gain a consumer following only to drop the quality later on. At least with glueing my own darts I can ensure consistant quality.
Worker's darts are factory glued, so if quality ever drops its the fault of the factory not doing their job properly.
Love the videos, always nice to have numbers
After reading the comments, I think Worker should have sent you these for free to test as your opinion has weight in the community. Alot of us were holding off even thinking of buying these untill we saw what you had to say. Then again it's cool that I know you don't have any 'conflict of interest' which I don't think others that get sent stuff to review can honestly say.
I don't think Worker really send out review samples, that's usually something NFStrike and other resellers choose to do.
I cant wait to see how these stack up to the DZP MK-1's darts.
Same here. Hopefully the DZ Pro darts are an improvement.
The ranges...epic
Is it safe to have a blaster that can shoot that hard? Looks awesome tho
Yes?
@@BradleyPhillipsYT ty for the very detailed reply!
in the accuracy test, if you set playback speed to 0,25 you can see the darts spin
Love this content. Can't wait to see what you think of the new half link pro darts that come with the nexus pro :)
Plan to test those new Tactical Strike darts once they get here!
On taobao worker describes the red ones as gen 2 but on worker mod and blaster tech they are called gen 3 +. Are the red ones any good?
I like them lots. They last a lot longer at least. You putting them against cut down adventure force darts in your fdl-3 next?
Worker darts just aren't as good in flywheel blasters as Adventure Force unfortunately
But have you tried? Weight distribution might be different enough to make them do ok. Would be pretty nice to have one dart for all blaster types
I'll try them, but if they're worse it won't be worth making a video
I did a test in my swordfish with both. The new workers were better I found but you would make a better vid than I would so I thought I would wait to see your A+ vid on it hahaha
Worker grooved wheels might work better with worker darts compared to the smooth wheels in the fdl-3 if you find they aren’t as good in your blaster.
Are all the red/orange worker short darts gen 3?
do you shoot the darts with the tip side backwards on purpose?
Is the worker prophecy for the retaliator a good buy.
Awesome video!
Will you ever make a video about sights?
What would you like to know about them?
like: Price, effective range, reticle shape, comfort and size.
Could you do a comparison of the worker terminator shell and the xzeus 2? (I mean, the terminator wins flat out on style points, but otherwise?)
I'm not really a fan of the Terminator. It has priming issues with high spring loads and I don't really like the look of it aesthetically. However if you like high power stuff, I have a Caliburn coming in the next couple of months and a Dart Zone Pro.
In the games you play aloud rainbow pumps.
Good to see actual data on the new darts! Cheers!
Also, what barrel length have you got on that 16kg LS?
16" of 17/32" brass, but optimum is probably more like 14".
Can you make a video of how to make the gun if you have please tell me
th-cam.com/video/-AB0eajclZs/w-d-xo.html
do these short darts (with the short dart magazine) work out of the box with flywheel nerf guns like my elite 2.0 turbine cs 18?
No they do not
@@BradleyPhillipsYT so i have to mod it in order for them to work?Or i have to buy a flywheel gun that can be modded to suit them? Like a stryfe for which many mods exist.I mean which flywheel blasters from nerf can be modded to accept short darts?Not all?Is it a per model thing?Stryfe can be modded because worker has a kit for it and turbine cant be because no kit for it exists yet?
I made these on my own with regular nerf darts and gen 2 darts
Do these darts work in breeches any other half darts
?
Ok I'll try some and test them
Are you going to do a review of jet blasters new darts?
New darts?
Bradley Phillips I don’t know if they are new but they are selling half length darts on one of their official retailers websites
Oh, those are just ACC's recoloured to Jet's branding basically. They come with Ceda.
nice Video :)
Could you tell mee how Long your "Shooting Range" is? :)
The distance was 100ft
@@BradleyPhillipsYT
Thanks :)
Would the gen 3's be a good option for the GavinFuzzy SPAMF Bradley?
Sure
Hi, may I know what barrel you are using?
That's a brass barrel created using a Jet Blaster Omni kit. I show how in this video th-cam.com/video/9gjCwVNPodk/w-d-xo.html
Thanks for the information
Anyone know if they work good in stock flywheels
I'm not sure on that one, most people mod their flywheel blasters to high crush these days.
TALON mags are where it's at my dude so why haven't you switched??
I have. Mine are orange.
Finally I won't blow the head off everytime I shoot it from my umb
Shouldn't blow heads off. I didn't lose any at all making the video.
@@BradleyPhillipsYT I'm using a plugged pump Ultimate missle blast with a 8 round rscb and I'm hitting 180 with 9 pumps. I can get 250 but 200 starts to destroy gen 1 darts
So im thinking:
-Jet blaster's CEDA spring can fit into Worker Prophecy's spring (25N)
-Worker 25N's spring can fit into K26 spring
So if u put all 3 of them in one blaster (caliburn) then...lol
It might gonna destroy ur blaster before u test it .-.
You'd need to be a strongman to prime it to find out whether it instantly explodes your blaster.
And a k26 can go inside a k14
And a k26 can go inside a k14
Better have that all aluminum caliburn or injection molded, otherwise you're gonna break the whole plunger system, sear, and probably bend the frame
@Ghast gamer there's no chance the 25N spring can fit within the K26. The Worker 25N and 28N are only a little bit smaller in diameter than the K26.
Are they even worker? They have no branding on them, nor the box they come in. They are damn fine darts though.
They definitely are made and sold by Worker.
you planned ahead for this!!! you knew they would match the colour of your blaster!!! so you painted it that colour
Maybe they made them this colour because they knew I'd like it
@@BradleyPhillipsYT actually, that is highly probable
YEEEEEEEESSSSS!!
Ooh this should be good
Hi
Hello
Good your blaster not black, so people don’t mistake it for a firearm.
They made them in your colors on purpose.
Damn XZeus is powerful.
Hey I am the first one commenting
Nice one