Step by Step Instructions to Program Your Car Homelink to Garage Door Opener | Overhead Door
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- How to program your Homelink Wireless Control System to your Overhead Door garage door opener. Watch these step by step instructions to program your garage door opener to your cars Homelink.
Learn more: www.overheaddoor.com/programm... - แนวปฏิบัติและการใช้ชีวิต
BEST Video....All other videos talk about learn and smart button but was not able to find how to do without the button. This video show what you need to do after you have completed the steps in car and now how to sync that with the unit.
I had to refer to this video again to program my car. This is the only video that works for me when programming Infiniti vehicles
This video was without a doubt.... One helluva lesson! Loved it! Worked like a charm! I tried using the manual with my vehicle and it didn't work! Within seconds after watching your video.... PERFECTION! THANK YOU!
What if you don’t have a remote
This is a flawless and accurate instruction that worked perfectly the first time I tried it. I had struggled with the carmaker's instructions which were close, but utterly useless in synching the in-car garage door opener to my garage door. Great job Homelink!
I’ve been at this for hours. Just now came across this video, and this is the only thing that worked. Thank you so much.
This works on the older model door openers to pair to new vehicles with new version homelink. I looked all over youtube and called two overhead door locations, they all forgot the first step of pairing the remote first then using the learn button on the back of the opener. Follow this exactly, it works perfectly. Thanks!!
This worked like a charm takes one minute to program a new car button with this method.
Materials: Original Overhead door remote, and a homelink on your car, or other remote. Maybe a ladder or a tall family member.
I just programmed one car and one remote, two buttons each, and no casualties. Very little swearing reqired.
To program my homelink car buttons to my overhead door. Model 7030.
The part I would add: be sure to "clear" your new car* of any preexisting code by holding down both outside buttons until the flash changes. Now they are empty.
Then using the hand held remote (hopefully you still have one) button, hold down until red and green both light up.
Then hold down the car homelink until it changes flash .
On the garage door motor, hold down the square for a few seconds it will light up blue, or the light next to it will be blue. Mine then turned purple.
Get back in car and push the homelink you just programmed on the car once, twice, and hold the third time.
The garage door should move if you're near it. (not under it).
I had to push my car button four times and then it activated, not sure what that was about.
But above all, have fun, because that is what matters most.
This video worked great for me! Seemed like a lot to do but it was pretty easy.
I did however added an additional step press and hold 1&3 on my cars homelink to reset/clear any pre-programmed signals on the car.
Then went on to
Hold garage clicker and home link button nearby till both status light changes (select whichever button you want, I did 1)
Walk up to garage opener, press and hold Program/Set button till lights kick on, walk back to car click homelink button 1 and then wait and click homelink button 1 again and it worked!!! Thank you
I followed this to the T...but it won't work. When I press the learn button on the opener, the blue circle comes on but it won't go to the purple bar unless I press it again. So frustrated...looks so easy and I followed exactly
Press and hold til the purple light comes on. Or just hold it for an extra 10 second if the purple dont come on. I was like u, tried and it worked
Thanks - this was just what I needed to complete the programming...well done.
This is the only video that worked. Thank you.
Morning Made!! Been trying for two days! Thank you for this video!!!
Thank you so much for this video! I tried for 45 minutes trying to set it up and it did not work and i found this video and tried it and it worked in 5 min. Thank you again!
Pp
Have a Legacy 850 S/N begins with 17 and in order to put the control unit into the purple mode I had to press and hold the program button until it turned blue, then release it after the 2nd blue light came on, then press it again for 1 second; THEN the long purple light came on! What a nut roll.
Thank goodness for this video.😁
Best video on this process
Thank You! Worked after the 2nd try! :) Much appreciated !
Excellent instructions!
This video worked perfectly the very first time i did it. Thank you. 👍🏼👍🏼👍🏼
Only video I could get to work for my homelink on my 2019 RAM 1500!
Thank you for this video. It was really helpful.
Glad it was helpful!
I've lost my handheld remote. How can I program just to the car?? or to a new handheld even?
Thank you foe this. 🙏
Thank you very much!!!!
It took me longer to unlock my truck than it did to program. I skipped step 1 (press and hold remote button) and went straight to(the head unit blue/purple lights and 3 presses of the home link). This method may alleviate some frustration, head unit legacy 920 w/WiFi, vehicle 2019 Nissan Titan.
Thank you
worked like a charm with 2022 jeep jl single remote legacy 850✌👍
Completely unnecessarily - substantially more steps than the competition
Can you program the homelink directly with the head unit? I lost my remote
Wow that's complicated.
I don’t see a green LED on my remote or in this video?! He says “once the green LED light comes on” but there’s no green light, in my remote or in this video. What am I missing?!
what if the program light turns red?
Mine will raise the door, but not lower it after i programmed it following these directions...
Helpful 👍
The springs at class. Ic
This does help, but specifically for my 2019 Mercedes, both this and the Mercedes manual instructions do not work - so this may help you.
This says once you are back in your car, press homelink once and then twice. Didn't work for me.
The Mercedes manual says to push the button repeatedly until the door opens or closes. This didn't work for me.
HOWEVER: After the Overhead Door is in program mode, return to your car and hold down the homelink button at least 3 seconds and stop. Do this until the door opens. One second is too short and 10 seconds will reprogram - you have to find a middle ground.
I programmed 2 doors in 5 minutes. I wish I had found this earlier before I wasted a hour
I’ve followed the owners manual for my Toyota, a video put out by Toyota and now this video and absolutely nothing worked. Either I’m stupid or this thing just doesn’t work.
What if you don’t have a remote
I only have an Overhead Door remote with ONE button. No LED's. And a standard drive 650. Any help?
Did you eber got helped or fix it? Im struggling
@@LenrottA7 hold the single button and the car button down til the car button light starts flashing. The press the program button on the garage door opener til you see the blue light. Then press and hold the car button til the garage door moves.
@@liljohnny210 i got it Jony thanks
I have tried everything possible and the red led does not light up with the green led. It's either red or green. I have been trying for about 2 hours to get it to work with my 2006 Dodge Dakota Quad cab and it will not. I have a Overhead Odyssey 1000. PLEASE HELP. PLEASE?
Hi Kevin, please reach out to our opener team at LewisvilleCSTeam@overheaddoor.com , they will be happy to assist you.
Just follow steps 2-4
Skip step one programming the remote censor
Kevin DeRousse follow steps 2-4. Skip step 1 programming the remote
This does not work for a 2018 Mercedes
Not working and my serial is 14000.
This video is worthless to me. I've tried multiple times to program my BMW homelink to my Overhead Door Odyssey 100 Model 7030 completely unsuccessful. I get both red and green flashing lights but while holding down the homelink button the LED never changes flashing mode. I've programmed my BMW to several other openers without issue until now. What A POS!
Overly complicated process.
All this work to program a remote!? Really?
Sucks. All it does is erase your remote.
Absolutely does NOT work!