How to Replace Front Upper Control Arms with Ball Joint 2011-2021 Jeep Grand Cherokee

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ib/1ASF...
This video shows you how to install new front upper control arms with ball joint from TRQ on your 2011-2021 Jeep Grand Cherokee. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
Estimated installation time for a professional technician is approximately: 5 hours 6 minutes
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obIW/1A...
• Pry Bar 1aau.to/oaaN/1A...
• 21mm wrench
• 13mm Socket 1aau.to/occB/1A...
• 18mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/ouj/1AX...
• 23mm Socket
• Trim Tool Set 1aau.to/oaAj/1A...
• Locking Pliers 1aau.to/opn/1AX...
• T50 Socket
• 1/2 Inch Breaker Bar 1aau.to/or8/1AX...
• Ratchet 1aau.to/ocdE/1A...
• Socket Extensions 1aau.to/occB/1A...
• Torque Wrench 1aau.to/obfZ/1A...
• Bungee Cord
• Cloth Rags 1aau.to/oQS/1AX...
• Dielectric Grease
• Gloves 1aau.to/obd8/1A...
• Marker / Writing Utensil
• Safety Glasses
• Bucket
• Floor Jack 1aau.to/oaA7/1A...
• Hammer
• Jack Stands 1aau.to/oanT/1A...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.