Montech Sky Two Build - Step by Step Guide | 13700K & Zotac Gaming RTX 4080 AMP Extreme AIRO
ฝัง
- เผยแพร่เมื่อ 12 มิ.ย. 2024
- A full step by step guide to building a PC in the Montech Sky Two PC case featuring the 13700K and Zotac Gaming RTX 4080 AMP Extreme AIRO. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
00:00 The Parts
02:13 Preparing the Case
08:31 CPU Installation
09:13 M.2 SSD Installation
10:15 RAM Installation
10:33 CPU Cooler Installation
13:41 Motherboard Installation
14:04 Case Cable Installation
15:49 Power Supply Installation
16:09 CPU Cooler Installation
17:26 Case Fan Installation
18:13 Graphics Card Installation
20:49 Cable Management
21:14 Complete Build Footage
21:59 Setting up the PC
23:04 Thermals
24:05 Benchmarks
24:55 Outro
Parts used in the build (Amazon links are Affiliates Links)
• Montech Sky Two
UK - coming soon
US - coming soon
CA - coming soon
• ASUS ROG STRIX Z790 E GAMING WIFI
UK - amzn.to/3Us77k5
US - www.newegg.com/asus-rog-strix...
CA - amzn.to/3uloJmW
• Intel Core i7-13700K
UK - amzn.to/3F5yT1k
US - amzn.to/3ihnPFl
CA - amzn.to/3VfYbzk
• Montech Metal DT24 Premium CPU Cooler
UK - coming soon
US - coming soon
CA - coming soon
• Kingston FURY Beast DDR5 32GB (2x16GB) 5200MHz
UK - amzn.to/3rdkhEU
US - amzn.to/3rdkbx2
CA - amzn.to/31XkRy4
• ADATA Legend 960 1TB
UK - amzn.to/3UpzbEM
US - amzn.to/3VMWae4
CA - amzn.to/3XTiUuI
• Cooler Master V850 Gold i Multi Power Supply
UK - coming soon
US - coming soon
CA - coming soon
• Zotac Gaming GeForce RTX 4080 16GB AMP Extreme AIRO
UK - amzn.to/3FmnFph
US - amzn.to/3B3SNaH
CA - amzn.to/3XSiwMT
• Gelid Solutions GC-Extreme Thermal Paste
UK - amzn.to/3tzlnwT
US - amzn.to/3mM8Sdm
CA - amzn.to/3xp1n0Z
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
More photographs of the build can be seen at pcpartpicker.com/b/NcxcCJ and a time-lapse of the build can be seen at • Montech Sky Two Build ... and the Case Review at • Montech Sky Two Review
Useful Links
• Lian Li O11 Dynamic EVO - Step by Step PC Build Guide - Step by Step Guide - • Lian Li O11 Dynamic EV...
• How to make a Windows 11 Bootable USB - • How to Make a Windows ...
• Motherboard Drivers - rog.asus.com/motherboards/rog...
• NVIDIA Drivers - www.nvidia.co.uk/Download/ind...
• FireStorm - www.zotac.com/download/mediad...
• Kingston FURY CTRL - www.microsoft.com/store/apps/...
• ASUS ROG STRIX Z790-E GAMING WIFI Overview - • ASUS ROG STRIX Z790-E ...
Music
Did It Again - OOYY
www.epidemicsound.com/track/g...
#pcbuild #montech #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc #zotacgaming #asuspcdiy - วิทยาศาสตร์และเทคโนโลยี
![บุกร้านไอศกรีม VJ วุ้นเส้น !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/g549nEhKZdc/mqdefault.jpg)
This one is the most clear PC Build guide i've ever seen, as newbie looking on how to do things!. One suggestion though when showing the power supply show the full back instead of the side of the power supply when explaining it would be helpful to someone like me who doesnt have experience building a computer
Got my montech sky two case today and all the components needed. I had a view questions about all the wirings, it being my first build. and you cleared them all up with this video. Much thanks, amazing quality build guide ❤
I picked this up just yesterday, and am HYPE to build in it, too! How did yours turn out?
I'm about to build my first gaming. Just a quick question after building it I need to update the bios.?
@@Nukeperu how did you update the bios
Incredible video! Thanks for sharing this with us. I am picking up this case and this clears up any concerns someone might have about building within it. Wonderful wonderful wonderful!
Nice balanced build, excellent hardware choices imo
Great build love this channel I learn so much watching your channel ty
Wow , very very nice Video.. Well done , a Lot of Work to do this video. Not Seen a good one Like that for Long Time .. thanks !
Amazing video and the case!!!! Would love to see more montech
I’m building a rig in this case now for my cousin. Great case. Plenty of gpu clearance. More than my O11. Only things I don’t like is there isn’t much room in the rear to run the cpu/power cables and close the back or up top with a 360 rad. The case needs to be 1/2” deeper in the rear for cables and 1/2” taller to clear the cpu power cables. It works just needs some massaging to clear everything. The rubber grommets also detach from the cage easy with any pressure against them. All in all is a great case. I mounted a 5 inch screen next to the fan on the bottom. Ran Corsair 360 rad up top and chained the montech hub to Corsairs hub as the master pwm hub and all the fans match up, color, speed etc.
Most 4080/4090 will need a different 12hpwr cable to clear the glass. This is the issue on newer cases. Even though these cards have been out for over a year. They’re just not deep enough. They say they’ll clear the gpu. But remember you realistically need another 1-1.5 inches of case depth to clear the 12hpwr and the glass to not have issues.
A 14700k with a 360 aio idles in the 20s and maxes around 80c. I wouldn’t run an air cooler with the newer Intel chipsets in this case. Even a 240mm would need better
Love this case
Great video thank you
This is an awesome case for the price.
I guess that the white connector is just to sense the speed of the fan with a proper cable from one of the fan header on the motherboard.
For the standardized front panel cable from the case, does it say which 2 holes on it are the Power Button? I am doing a case swap with HP omen and on the motherboard it just had a single 2 pin header for power switch. is it the middle 2?
how does the DT24 Air Cooler Perform would you say? Is it for looks or does it have the cooling power too?
I was not able to install the 4th fan on the bottom. My MSI MAG tomahawk motherboard has the usb 3 header there and the cable interferes with installation. Had to install on the top of the case (using screws that were not included)
Na początku karta bez obciążenia przechodziła w tryb pasywny lecz po kilku dniach caly czas witraki pracują.Co powinienem zrobić żeby wiatraki uruchamiały się tylko podczas obciążenia karty ?
Enlighten me please. Can I use splitter on rgb hub? I want to put 3 more rgb fans on top totalling to 7 fans but from what I see it only has 6 connections. Planning on my first build and this case looks really cool
Thank you
how about put liquid cooler 360 on top? you will have a trouble when you install 8 and 4 pin for cpu power
Do you need to connect sata, if your lightning controlled by mb
Hey Christopher not sure you're still replying to these older videos but I was wondering what the connection from your PSU to the USB 2.0 header on the motherboard was all about? I can't find anything about that in any documentation for my motherboard or PSU. Thanks!
hey plz review the phanteks g500a and make a guide it will bw helpful.
Are you sure about the slot you pointed out as the 2nd slot that goes toward the cpu? In the manual for the asus z790-e it says that the m.2-2 is at the bottom slot connected to m.2-5 heat spreader. The bottom slot on the left is the other m.2 slot that goes toward the cpu. You connected the m.2 drive to slot 3 that goes to the chipset.
I think you are right. I just built my z790-e this weekend and seems like M.2_2 is the one talks to cpu but not M.2_3 as Chris put in his ssd. M.2_3~5 talk to the chipset.
@@tommyxbl sounds right to me.
Can I use this with a motherboard that doesn't have an argb header?
Can you shut down all rgb lighting?
I just did a build in this case with a 3070 Ti and it's great once the three-week-long ordeal of getting a working fab hub from Montech was over. Unfortunately, I was able to snag a great deal on a RTX 4080 and the darn thing is a full inch taller and there's no way to get the card AND the power cable in with the side glass on. I was looking to see if anyone had been able to do a build with a 4080 and was initially happy to see your videos, but then I realized you DIDN'T PUT THE SIDE GLASS BACK ON and it doesn't appear you bothered to mention this in the video.
I'm hoping to do this case with a vertical mount, maybe you'd want to try? Just not sure if the bottom fan would bump the card.
@@donmohave Fortunately the 4080 DOES FIT with the side glass on with plenty of room to spare. I got a CableMods 12VHPWR-to-3X Corsair adapter cable - but not a right-angle adapter - to not have the mess of the squid dongle and the cable clears the glass by at least a half-inch without having to aggressively bend it down.
I ran the cable underneath the GPU between the bottom fan (not using the hole in the shroud) and the GPU and initially ran into a horrid noise because when the GPU's fans started turning, they sucked the cable up and made it rub. I'm sure the bottom fan didn't help by blowing up either. But a slight adjustment to the angle and it never happened again.
can you tell me if you can install a 120mm fan on top with a 240mm radiator on top as well.. i think 2 direct exhaust fans are really necessary
@@davelee73 inside the case? With fans on top?
I did a 360 AIO with (3) 120s below blowing up and it's real tight. About an 8th inch gap from top of Mobo.
I have and older B450 motherboard (no WiFi) and it doesn’t have a port for the header type C cable, is it really needed or do I need to buy an adapter or something?
@ChristopherFlannigan
I have this air cooler Base version, without rgb, i7 13700k and the same case. When I use blender it reachs 99c everytime I render something. I have to choose another cooler for this processor using this case?
A Peerless Assassin 120 SE may well do a better job.
does it has tinted glass?
ZOTAC woohoo!!
What did he plug on USB 2.0?
I'm trying to figure that out to. He said it was a connection from his power supply. Maybe the power supply supports communication of its status via USB or something?
would this card fit inside xpg battle cruiser ?
This video is for a build, for the case, not for a GPU.
@@ObakuZenCenter a little help won't hurt lol :D
i was asking the guy regarding his observations of the case it self and how "wide" it is , as he must have seen a 4080 and the case it self before , would they match.
Hi Christopher, would you give me a hand? Now I have a 4000D Airflow in whit but I'd like to move to a black system. These are my PC parts by now:
MSI B550 Tomahawk
Ryzen 3700X
Crucial 16 GB RAM 3600 CL16
Kingston KC 2500 Gen 3 NVME SSD
MSI MPG A750GF PSU
3060TI FE
x6 Arctic P12
Noctua NH-D15 Chromax Black
My options are:
1. Move to a NZXT H5 airflow keeping my CPU cooler.
2. Move to a NZXT H5 Airflow and move to a Corsair iCUE H115i Elite Capellix 280m + LCD mounted at the front.
3. Move to an Sky Two keeping my CPU cooler.
4. Move to AN Sky Two and moving to a 360 at the top, maybe a Phanteks Glacier One 360MP D-RGB.
Another option would be moving to a 5900X to get the last AM4 candy, even if I don't need that much power, and keep the rest of my rig as it is now (or moving to it in a few months).
Ask on PC Partpicker.
I just built inside this case and my fan hub exploded…
my fans arent working
Check your connections. Chances are something isn't connected properly.
how the fuck does your 3.1 cable go in so easily mine refuses to go in. also i dont think my graphics card is going in with that big ass cable in the way anyway
Jesus that’s very low for cod u should be In the 180-200s plus for the 4080