Gema OptiFlex PRO Manual Powder Coating System

The Gema OptiFlex manual powder coating system, we think, is the best powder coater in the world! Come check out our informational video, all about the features and benefits of Gema's #1 powder applicator. Gema even offers a generous 5-year warranty on purchase of new systems.
** NOTE: FinTech is a distributor for Gema parts and equipment in the Pacific Northwest (Oregon, Washington, Idaho, Montana, Alaska). If you're outside of our territory, we invite you to enjoy our videos, then check out Gema's 'Distributor Locator' to find a dealer closer to you: www.gemapowdercoating.com/en/... **
Portland • Seattle • Pacific Northwest
Our home online: finishing.tech
Email Address: [e-mail]
Follow us on Facebook: / finishingtechnologies
Phone: [phone] • [phone]
LINKS:
OptiFlex PRO Models, FinTech website: tinyurl.com/2be2rewj
OptiFlex PRO Model Overview: • OptiFlex PRO: All the ...
OptiFlex Maintenance Video: • Maintenance Areas For ...
Gema e-app for iOS: tinyurl.com/ymu8wjuy
Gema e-app for Android: tinyurl.com/25ua6j9s
00:00 Intro to OptiFlex PRO
01:10 OptiSelect PRO Powder Gun
01:40 OptiStar Control Unit
02:54 Digital Valve Control Technology
03:39 Precise Charge Control ("PCC") Mode
04:52 Powerboost Mode
05:29 Powder Pump Details
06:42 Gema E-App / Bluetooth Feature
07:32 Other Features of OptiFlex PRO
08:18 Summary and Contact Details

[@aaronrodriguezs2670]

How do u change it from box to hopper style

[@finishingtechnologies]

Great question! You can find the step-by-step instructions to change your OptiFlex Pro’s application on page 33-34 of the corresponding manual found here: www.gemapowdercoating.com/fileadmin/documents/User_Manuals/English/Equipment_and_Controls/Gun_Controls/OptiStar-CG21-en.pdf?hash=1715870895
Basically, after moving the powder pump from the box feeder to the top of your hopper, you’ll hold the lower left button on the controls screen for 5 seconds until the screen changes to display the P00 system parameters. Next, you’ll toggle the application to ‘0’ / ‘F’ for fluidized hopper. Hope this helps!

[@simontohermes2830]

Hey, i dont know how to start the pcc Mode for my settings. You know how it works ?

[@finishingtechnologies]

Simon - Thank you for the question. To engage PCC mode, you'll need to create a custom program. To create a custom program, use the ‘< P >’ buttons on the lower right of the screen to toggle between programs P1 through P20. You can create up to 20 custom programs on this unit. The create a custom program with PCC mode, you'll need to set your microamp setting at 10 or below. Let us know if you have any more questions, and we’ll be happy to help. You can always call us at 503-222-9741

[@ohhdeshtarmonath]

كم سعر

[@finishingtechnologies]

It depends on the model and the distributor, so contact your local distributor on this one. We serve the Pacific Northwest in the United States, other distributors can be located here: www.gemapowdercoating.com/en/contact-us/local-distributors