Hey man im considering buying this front bumper for my 15 stock lancer, was wondering what other parts id have to add beforehand to make the fitment of this bumper easier ?
The Varis front bumper is meant to fit the Evo x, so it will be wider than stock lancer fenders. You can get a body shop to fit it on for you or get Evo x fenders or wider fenders to make the bumper fit nicely
I don't unfortunately. If you are looking to get OEM Evo x front fenders, Mitsubishi dealership might have it. Or you can try buying them used on Evo x or Facebook marketplace groups
Looks amazing love the the whole look ur going for👌just curious tho how did u get the VARIS bumper to match up on the side arches, they made that aftermarket bumper for the evo which is 2 inches wider than the stock lancer, I’m thinking of getting the bumper but have been put off because of fitment, been told I’d have to get evo fenders just to fit it
Thanks man I appreciate it! Yes you would need Evo fenders or wider fenders to fit it since it is wider. I am widebody so the new varis bumper lined up
The J Media aww okay awesome I could tell it was wider at the back but I’ll have to look into getting some new arches thanks for the reply 👍 keep up the good work too dude, build gets better and better every vid everything you’ve put together looks very unique 👌
@@charliedickens7244 Yea the front has a Widebody fender as well. The whole fender was replaced. Thanks man I appreciate it! More plans to come soon as I slowly build it up. Stay tuned for more!
Didn't get to film that part but had to modify fitment because the side bumper tab broke. My cold air intake has been fine so far. Had it on the car for 2 years now
@@TheJMedia ...tqvm...because grill fitment very nice...owh very long time you use😆...i had been use but i have bad day when very heavy rain and deeper water on the road cars stuck.cannot start engine n check my inside reprocating parts finish...
Thanks man I appreciate it! Yea it was about $600 to get it painted but price depends on the shop too so I would check with your local shop. I have more photos on Instagram @jus_tyn if you wanna see more of the car!
They are custom made Widebody fenders made by a body shop. These front fenders are direct fender replacement and rears are bolt on and done by a body shop. If you are interested to purchase, dm me on Instagram @jus_tyn for more info
@@TheJMedia how much is the front fender and rear fender gonna be? i'm planning to get the front fenders the same as you had, and the rear fender made by battleaero soon.
This was a rep Varis bumper made to fit on lancers. I also have the authentic Varis bumper sitting in a box.. th-cam.com/video/8sjH58yDHX8/w-d-xo.htmlsi=r8yYVVcRBcz0wygH
AWESOME! Now it looks very aggressive, like it a lot.
Thank you! I love how aggressive it looks too
Hey man im considering buying this front bumper for my 15 stock lancer, was wondering what other parts id have to add beforehand to make the fitment of this bumper easier ?
The Varis front bumper is meant to fit the Evo x, so it will be wider than stock lancer fenders. You can get a body shop to fit it on for you or get Evo x fenders or wider fenders to make the bumper fit nicely
@@TheJMedia thanks man i appreciate it, got anywhere online you recommend to get evo x fenders?
I don't unfortunately. If you are looking to get OEM Evo x front fenders, Mitsubishi dealership might have it. Or you can try buying them used on Evo x or Facebook marketplace groups
Yeah! Pinoy pride!
Yea he is from the Philippines!
Looks really good mate
Thanks man I love how it looks too!
look so much better but Varis bodykits are too expensive
Yea I agree! I love how they look but are expensive
Did you have to modify/replace the crash bar to a JDM? I heard to get the varis bumper to fit you have to get a JDM crash bar
Didn't have to replace crash bar
@@TheJMedia what version did you get?
Varis v1 with carbon lip
th-cam.com/video/8sjH58yDHX8/w-d-xo.htmlsi=fOh-NzH_TKlbJ0Pi
@@TheJMedia thank you
@@TheJMedia are you sure it’s V1? I checked bulletproof and i only seen V2 and V3 I heard V3 you need a JDM crash bar but I don’t know about the V2
He’s killing me wearing those All Star Jordan 1’s. There worth a little money.
Yea haha they are nice kicks!
to make it fit did you put it on the original lancer side brackets or did you replace them evo x side brackets ?
Used the lancer side brackets. (By side brackets I'm guessing you meant the brackets underneath the headlights by the fenders)
Looks amazing love the the whole look ur going for👌just curious tho how did u get the VARIS bumper to match up on the side arches, they made that aftermarket bumper for the evo which is 2 inches wider than the stock lancer, I’m thinking of getting the bumper but have been put off because of fitment, been told I’d have to get evo fenders just to fit it
Thanks man I appreciate it! Yes you would need Evo fenders or wider fenders to fit it since it is wider. I am widebody so the new varis bumper lined up
The J Media aww okay awesome I could tell it was wider at the back but I’ll have to look into getting some new arches thanks for the reply 👍 keep up the good work too dude, build gets better and better every vid everything you’ve put together looks very unique 👌
@@charliedickens7244 Yea the front has a Widebody fender as well. The whole fender was replaced. Thanks man I appreciate it! More plans to come soon as I slowly build it up. Stay tuned for more!
can you show fitting grill bumper...
i wanna advise you becarefull using injen cold air intake when heavy raining or high water on the road...
Didn't get to film that part but had to modify fitment because the side bumper tab broke. My cold air intake has been fine so far. Had it on the car for 2 years now
@@TheJMedia ...tqvm...because grill fitment very nice...owh very long time you use😆...i had been use but i have bad day when very heavy rain and deeper water on the road cars stuck.cannot start engine n check my inside reprocating parts finish...
@@mrrunnerpomen3644 Ouch that's not good. Yea there is a risk of hydrolocking. I put on an intake cover now to protect it from water
Hey man! I love the build. I’m also building my dream Lancer. Question, how much did it cost to have the bumper painted? If you don’t mind me asking
Thanks man I appreciate it! Yea it was about $600 to get it painted but price depends on the shop too so I would check with your local shop. I have more photos on Instagram @jus_tyn if you wanna see more of the car!
Superrrr aggressive bro where did you buy it from? Do you have the link?
Thank you very much I appreciate it! What part are you looking for?
The J Media the bumper !
You can buy it from Evasive motorsports or Bulletproof Automotive website
Hi did you get the lancer Varis bumper or the evo one? I got the lancer Varis bumper and it just won’t fit 😅
I had no issues with fitment. You might need to bring it to a body shop if you got an aftermarket brand that doesn't fit good
@@TheJMedia ahh right, I’ll do that thanks! Is yours genuine Varis?
This one was rep but I have a genuine one on now.
th-cam.com/video/TdyYuBumVus/w-d-xo.htmlsi=wQvrCr1a4dRzdMmw
Hey Im thinking about getting a evo x front bumper for my 2017 lancer. Do you think it would fit?
Nice man, I've heard of others who done it before but you will need wider fenders too since the Evo x bumper is wider
@@TheJMedia Okay and what about the 2017 fog lights they are different than the evo X lights
I can’t decide whether to get the Ralliart front lip for my Lancer VRX or should I get a splitter
Both looks good! You can get a lip and then add on a splitter underneath! Haha. That's what I did
@@TheJMedia I have the OEM bumper on my VRX and I wanted the Voltex but it requires trimming and I wouldn’t want to mess it up haha
Yea the Voltex lip is meant for the Evo x and you do have to do some trimming to make it fit. The ralliart lip will look good!
@@TheJMedia sweet thanks man
No problem! Good luck with your build
what tyres and rims size are those again?
where’d you get that hood?
Got the carbon fiber hood from VIS Racing
what widebody fender is this? do i need the bolts and panels side bracket from the stock lancer fenders to put it on to this wide fenders?
They are custom made Widebody fenders made by a body shop. These front fenders are direct fender replacement and rears are bolt on and done by a body shop. If you are interested to purchase, dm me on Instagram @jus_tyn for more info
@@TheJMedia how much is the front fender and rear fender gonna be? i'm planning to get the front fenders the same as you had, and the rear fender made by battleaero soon.
You're looking at usd$2000 for front and rear to be custom made. Can send you more info on Instagram
Do you know how the front bumper fits with stock fenders?
To my understanding it would need wider fenders. I have Widebody fenders on my car
Where did you get the undertray?
Do you mean the front splitter? I got that custom made by Project Motorsports
The J Media oh thanks man! Was it expensive? And yeah my bad bud lol meant splitter lol
@@Dickersonkids No problem! It depends on what design you want but usually around $200ish or $300ish. You can hit them up on Instagram @project_m_
Is this a lwgit varis front bumper or replica?
This was a rep Varis bumper made to fit on lancers. I also have the authentic Varis bumper sitting in a box..
th-cam.com/video/8sjH58yDHX8/w-d-xo.htmlsi=r8yYVVcRBcz0wygH
@TheJMedia still in box? Care to sell? 😅
Yes still in box just like in the video. Keeping it for a rainy day when I decide to throw it on. Sorry!
How much does a front bumper like that cost??
A lot haha. Hit up Evasive Motorsports or Bulletproof Automotive to buy it
@@TheJMedia is it sell a kidney much :)
@@riley881 Haha close or a left nut
Nice
Thank you! 🙏
Would this fit a Ralliart.
It will with some custom work
@@TheJMedia ok cool thanks mate
No problem!
what kind of cf lip is that ?
It comes on the varis bumper. But it is the varis carbon fiber lip
@@TheJMedia v2 version?
@@izwanshamir5146 Yes this is v2
Varis v3?
Not the v3. This is the v1.
th-cam.com/video/8sjH58yDHX8/w-d-xo.htmlsi=mN4HWtIZpkQChEQh
@@TheJMedia ou thx daddy
You're welcome son 😊