How to spray paint your bumper or car!
ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2017
- Quick steps on how to spray paint your panels
Either bumpers up to cars if follow in those steps
Really easy to do, very time consuming
Enjoy!
Step one : prep bumper 400grit then 1500 grit
Step two: wash off
Step three: primer
Step four: wet sand primer 1500 grit
Step five: wash off
Step six: paint
Step seven: clear
Step eight: wet sand primer 1500 grit
Step nine: buff with meguiars compound
Step ten: enjoy your painted panel
Dallas ig : / hoffman__d
FOLLOW ME ON SOCIAL MEDIA !!!
- My Instagram : / ohhrickayy
- Snapchat: OHHRICKAYY
- twitter: / ohhrickayy
- Toolows instagram: Toolowfilms instagram : / toolow_films
FOLLOW MY GROUPS ON SOCIAL MEDIA !!
- Iceyyyboyz instagam : / iceyyyboyz
Make sure to subscribe for more DIY, how to's & vlogs !
Also make sure to like and comment ! - ยานยนต์และพาหนะ
And that's how we learn. Experience is the best teacher. Came out good for a beginner. Don't be discouraged from other comments, you did a good job. I can tell that you are happy with it, and that's what really counts!!!!
I really appreciate this video and the helpful comments. I am about to paint my bumper and this video has helped out a lot! I have a respirator, 400 and 800 grit wet or dry sandpaper, plastic sheeting to keep my garage from getting covered in paint, adhesion promoter and sandable Rustoleum filler/primer and Duplicolor spray paint and Rustoleum acrylic lacquer. Thanks again!
I'd argue that the best automotive clearcoats in a can are the 2K versions. Either Spraymax or Eastwood. Also worth mentioning is that the 2K products are legit toxic, so use a respirator unlike what you see in the video.
Big lung cancer risk as well as other cancer risks.
Sick video bro. I'm looking at doing the same to my front bumper soon. This helped. Thanks!
I love the hood!!! Swell job Youngin, I used to work in a body shop and that’s some really cool rattle can work. 👍🏾
Love your video very professional you make it look super easy
I think you did a wonderful job. It’s looking great! I would only add an exhaust fan to this video and two 1K lights. The lights let you see what you’re doing better and they make the paint stick to the bumper better. And they dry it better. The exhaust fan is for the over spray and your health. Turn the fan at the right speed so it doesn’t pull too fast or too slow. The fan will be messed up with paint rather than your lungs. You did a fantastic job and you worked extremely hard. The outcome was fabulous!
Thanks streetwise garage for the video I'm going to be repainting my bumperit's a gray plastic that I got and your video is perfect this is my very first time ever doing something like this I do all my other mechanic work myself but as far as painting this is my first time doing it and I think I can do it thanks to your video and you did a great job it came out nice
Hey man I watch this video like 20 times while painting my front bumper didn’t come out as good as your but definitely not bad for my 1st time thank you 🙏
Wow, thanks mate. I'm do repairs for my family and I'm doing my first respray on my father-in-law's bumper this video helped me out big time
did you sand every layer of paint? thanks for the tutorial. just got an after market bonnet and i might try and play with it with a rattle can. 👍
Thank you, thank you my friend. Really appreciate the content. 👍🏻👍🏻👍🏻🏴
Awesome.video. I don't have time to take the bumper to the shop so if rather do it myself. Awesome job man
This vid really helped me out! Your video gave me almost all the info I need. The only thing I wish you would have done is given more info up front on how many cans you need on average for bumpers and showed how you are sanding the bumper. Can I use a belt sander or is this by hand? If belt sander, what is recommend to keep it from tearing up the plastic? Also an example of "wet sanding" woulda been legit.
Thanks for the post and the brand recommendation. You seem to know your shit.
Keep posting! You just got a new subsciber
excellent job mate.its all in the preperation.
Before primer I would just sand it with 600 max, then lay down the primer and sand the primer with 800 max. The higher you go on the grit the less adhesion there will be, especially if you use a cheap primer where the chemical adhesion is probably not as good as with an expensive one.
i usually just do 600 and use filler primer
@@e36fanatics 600 grit before or after the filler primer?
@@rkgsd before, because primer filler fils out small scratches.
@@Jpbawlings Thanks!
hey i was debating whether or not I Wet-sand the clear as high as 1500 because the rest of the cars panels would have come from factory and be slightly "orangepeely" as its not wet-sanded. How can I match a bumpers texture that I would be painting myself to factory paint?
1500 grit is too fine for sealing the primer - use 1000 grit (or 1200 at the ABSOLUTE finest) or the base colour may flake/peel off!! Some people won’t go any finer than 800 for wet sanding primer 😅
If OP is reading this, did you have any problems with flake/peeling months later?
Cheers 🍻
I just uploaded a video about the "essential" prep solvent to use during your prep. I noticed he didn't use one and using it will give you the cleanest surface before spraying.
This was handy painting my grille on my 99 Burban. Thanks for the video.
Outstanding job, how many coats of clear before I sand the bumper?.
I'd wait at least 3 or 4 days before wet sanding clear coat... You need to let the paint harden really for a good while.. clear can still be soft for weeks after it doesn't fully harden as quick as you think
Did u wet sand for preping or dry sand or does it really matter? What grit did u use to wet sand the primer? Also how has the paint held up?
a lot of pros here.i think it came out really good.
James Ware I found you again ? I saw you at another video 😂
On the last step(wet sanding clear coat with 1500) , if you buff it out would it be permanent or just take a couple weeks to fade away ?????
How many cans did you use of the Duplicote? Anything new you'd do or like I'm thinking that's cost effective and will do? Thanks for sharing too.
Question bro..is that a spray color you got over the counter at like HD or Lowes? and is that the Z's original grey color? I have an original grey Z and need to try to see how well the color match is..
Great information man, love it.
Wow, not only were you able to match the bumper color with the rest of your car, but also the inside of your lungs too. That's impressive.
😶
😂😂😂👌
No one likes a health and safety expert mate
No shit his lungs
Who gives a fuck
Very awesome job looks great thank you for this video
So you had no issues using dupli- color paint and Rust Oleum clear together as the basecoat /Clearcoat? I thought it was best to use the same brand to avoid compatibility issues?
Thank you gonna try to paint the rocker panels on my R spec. Ordered paint comes w 4 steps. Idk wish me luck 🤞. If it doesn't come out as nice as yours I'll be headed to body shop or maybe I'll have to take it to you lol. Good video. But I wanted to see how you were sand cause I'm a complete novice when it comes to painting cars. Ive only done furniture which I went sand but idk if it's the same process. We'll see
Hello. i need help...please and thank you. i am working on a 2010 ford escape. the paint is fine, it's just faded and just needs to be re-cleared. i will need to sand the clear and re-clear it. i would like to know what size sand paper to use, i.e. 1500 grit and should it be dry or wet. please help. thank you.
my last coat of gloss looks very satin/matte is that normal before wet sanding and buffing?
@STREETWISE garage Why sand it down with 400 grit,even though it’s already primed, asking cause ima trying to replace my bumper cracked bumper, with a new primed oem factory bumper
hoping i can do this process to paint my bumper in my bugeye wrx! thanks so much!
Just a tip if your painting something a bright color use a darker color primer. It will pop a lot more
Wow - looks great - thanks for sharing!
STREETWISE garage a really good job well done, your youtube video helped me spray paint my own boot lid and rear bumper, thanks heaps from Edward Scott in Queensland, Australia.
You can get a small rectangular pop up gazebo or tent with 4 sides and roof on which will stop the overspray problem.
I accidentally painted over some sanding debris left behind would I be able to re sand and start from scratch in that section ?
Dammit Bro you did a amazing job very nice 👍👌💯 keep up the great work take care
Good video. Gave me some good ideas to paint a bumper.
So do you sand again after the last clear coat and the clear coat on more time after?
hey man after you painted it, would you say it’s able to put vinyl wrap on the parts you painted ?
thats really nice, good work
Bro. Quick question.
Did you wet sand between clear coats or did you just spray one later on top of another?
Can I used this same white primer? My car it's a silver metallic color brighter than your Z, I'm looking for a primer to start the process of painting my front bumper but there's a lot of color choices of primers out there and I don't know wich primer color should I buy
What would u recommend I do to take holes out of a bumper from terrible license placement
I just finished putting clear coat on the spoiler that I was painting today
It's drying now, hope to be satisfied with my work tomorrow
3x primer, 3x color and 3x clear coats 😬
How did it come out brother
Instead of wet sanding the clear at the end, can you just put rubbing compound and wax it?
Can i use this spray paint method on metal panels like fender,doors etc?
Sure glad you repaired the cracks to that bumper that sits 1” off the ground. This must be a weekly thing for you.
Great video. What is the product name and manufacturer of your front spoiler?
My car is Blue couloir i have litle bitle scratch
Which spray i can use and how many spray i need to buy bcz the garage is demande 200 Euro to paint
Did you use 3 coats of clear? And what grit did you use for wet sand? Did I miss that.
So, if I want to change the color of the car bumper from Grey to Silver. Do I need to sand the old color off until it's all gone? Any advice will do. Thanks
Im doing this for my BMW e90 bumper cover. Cleaned, sanded, got the primer down. Waiting for it to dry for the base coat
The dealer that sold me my truck did the bumper like this and it started to flake off at the carwash. When it comes to paint do it right or dont do it at all.
So if I want to sand my car doors (oem paint 90crx ) I just use 400 then spary paint 2n1 primer/paint sand w 1000 then spray paint again ??
Did you polish after sanding the clear coat?
On step 3: is it plastic primer or epoxy Surfacer? Thanks
Its always good to put the music credit in your videos.
You do not need to sand with 1500 after the 400. In all actuality 400 or 600 grit is perfect to paint over as long as it is all flat and any damage prepped good and primed.
Bro you should have filmed the painting process
he use a compressor
He didnt even do it himself
Hey everyone, the greatest results that i've ever had was by following the Magic Painter Method (just google it) definately the best course that I've tried.
hi guys, the greatest results that ive ever had was by following the Magic Painter Method (i found it on google) definately the most helpful course that I've tried.
Not certain about the points made but ,if anyone else is searching for car paint spraying tutorial try Sovallo Auto Painting Fixer ( search on google ) ? Ive heard some super things about it and my co-worker got cool success with it.
Hi , i’m painting my BMW bumper and I primed it and forgot to wet sanded before I added the paint. Can I wet sand it with the paint on there and then paint it again and put the clear on it?
The finished bumper looks great, you'd never guess was do it at home job.
About how much was the total cost to paint the bumper and do you notice if it's any less durable than a body shop paint job? I'm wondering about paint chips from rocks etc.
Well said...
hey man, is the clour for your Z, silverstone metallic? thanks
How long after priming should we start wet sanding ?
So the last step, you did a wet sand with a high grit paper? No Clear coat again?
I work in a collision shop and for proper adhesion we sand are panels with 400 grit, jumping from 400 to 1500 is pointless you have to work your way through the grits to actually knock down the scratches
Ryan Shantz thinking about painting a new lip, what do you recommend step by step wise when it comes to sanding and painting
Hi, how many of primer cans did it take for you to cover that.
What did you use to buff it? What machine and pad?
how many cans of dupli-color did you use to paint the bumper?
What is the best way to match the paint with your car
Excellent video but there is sometimes contrary of info in one sentence. Like four coats and then two coats…. Confusing. Also what do you use to wash bumper before applying first coat of primer ? What’s up with hair dryer ?
Great job bro for real wow!
Would you recommend any color by dupli color? Also what would you recommend for a matte finish coat instead of gloss
Recommend any color by duplicolor? What kinda question is that ? And if you want a matter finish use matte clear instead of gloss. Come on man
Good work. Taught me something
Would I need a clear coat if im going for a black matte look?
How does it last against sun, when you leave it outside
How long did it take from start to finish?
Hi, if my bumper is already primed, do I still need to sand it down?
good video. I will have to attempt this. thanks
I have a question, how many cans did you use for each?
Good video man!
hey ,if anyone else wants to discover car spray painting courses try Jaffacter Paint Sprayer Coach (Have a quick look on google cant remember the place now ) ? Ive heard some extraordinary things about it and my friend got amazing success with it.
how many cans did you need of each for 1 bumper?
do you top coat it after the layers of paint?
My fender had a dent in it so i bought another one from scrap yard but its a different colour. Its perfect condition but just a different colour. How would i spray this? 1000g first, then primer, then base coat, then clear coat, then 1500g and buff with a polish?
I just sanded down mine sprayed 2 layers of primer. Sprayed 6 - 7 clear coats of paint and 2 layers of laquer
I think it came out really good. I know there are a number of negative comments how you should have done this or that, but chalk it up to haters. You're not a body and paint shop guy. It only cost you for supplies and time. Yeah, sure you should wear a mask and if you were doing this everyday for a living, it would be relevant. The finished job came out great, will you get chips? Of course, its a front bumper and a spoiler that close to the ground. Wrap clear film on it you'll be fine for a while. Cheers
Does the work with plastic bumper?
Was it just me or did anyone else wanna see him actually apply the coats off paint to bumper rather than just seeing the finished article 😂
same here.
interesting points ,if anyone else needs to find out about car spray painting courses try Bablim Paint Booster (do a search on google ) ? Ive heard some decent things about it and my partner got amazing success with it.
Exactly what a waste of my time
perfect
came out great
I’m reading the comments here and I’m not sure which sand paper to use now everyone’s giving different opinions what would u guys say over all is the best sand paper to use before applying the primer?
340-400 max for primer.
Good job brother very informative.
How many cans did used for primer and clear?
I love it!!! I'm gonna try it. Cause some truck hit me and another car. My poor z 😖😢💔 thanks for the video!
Hey, I’m having a hard time doing a 2 piece plastic grill for my f150. I didn’t do a rough sanding before primer and so I painted the grille and the colour is bang on but after I finished painting it didn’t have much gloss to it, almost matte looking. And I put some clear coat on top of that and it doesn’t look like I put it on what so ever. Should I wetsand the paint then try to use the clear coat again? I think it’s doing this because the pours from using the paint became quite large so it’s like I’ve got to fill in them with the clear. If anyone has any ideas on how to fix this lmk:)
Anytime painting plastic you must use adhesion promoter before anything. Then lay your coats of primer, sand it using like 6 or 800 then apply coats of paint, then apply clear. You can do between 3-5 coats of clear then to get rid of orange peel wet sand with like a 1000,1500,2000 then use buffing compound, a polish compound, then wax.
How can you use rattle cans on big surfaces I just don't understand.
What side mirrors have you got on your z?
Looks better than I thought it would with it being a rattle can