DIY: Electric Scooter Conversion With Hoverboard Parts
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2018
- In this video I’ll convert regular kick scooter to electric one by using hover board parts.
36V 350W Brushless Motor Speed Controller + LCD Meter: goo.gl/dg1AGH
Thumb Throttle Handle: goo.gl/eWv2jB
0.15 x 8mm Nickel Plated Steel Strip: goo.gl/22c2of
10S 36V 16A BMS Board: goo.gl/Sf6vxz
High-temperature Resistant Tape: goo.gl/Yc7FA2
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips. - แนวปฏิบัติและการใช้ชีวิต
I'm not going to build such a scooter anytime soon, but I must confess, I'm really impressed by your skills! Impressive DIY project imo!
HODYO Design I 2nd this. Well done
HODYO Design - No
HODYO Design
you can try this one...th-cam.com/video/HY7OmsveQ50/w-d-xo.html
@@sagarevstore4524 We took the same parts for our mini Wheelie bike video :D
That is the best DIY electric scooter build I've seen on TH-cam great work.
that was so neat a build that if i never watched this video and saw a photo of the scooter i would 100% believe it was bought from a shop! thats a testiment to your build skills right there!
Usually when i watch youtube videos, people's battery work scares me. I like yours. Nice work.
Great job, I love you attention to detail. I am currently doing a similar project, I am using a 10 inch hoverboard and using the motors, battery and charger to build an adult size trike.
Amazing video! Thank you for the detailed instructions. I am building one now and all I need to do is install the electronics and I will be on the road!
You look amazing, buddy. What a top design! Congratulations
You did a tremendously good job!
Yup thx
Outstanding! A very nice piece of work.
Great video! Very complete/detailed but not excessively long!
Its a CLEAN DIY build, I have seen around.
Very impressed, I have a broken hoverboard just sitting around so I was gonna try and make something out of it, the only problem is that I lack some electronics knowledge.
I would love to see you explain like what and why the electronics parts do, for instance that yellow connector, the different wires that stick out of that speed controller box.
Really awesome work, dude. Really well done! 😀
BTW, I made a 10w LED flashlight inspired in your 100w one. I think it's going to be published in two weeks. 😊
I love how easily everything was for you mine will take me for ever to build and look nothing as good as this one great job
I did a 350w conversion recently, I made the battery 250wh 7ah 2p10s Mj1 ... I split the pack and placed 4 batteries within each side hole of the chassis rail, as well as 12 batteries in the centre channel, there was also room in the centre channel for the controller ! I still have rear suspension too ! ;) I may copy your battery cover technique !
This was an awesome build! Hope you enjoy the scooter :)
Sweet build, well done
Well done! Thanks for sharing your project.
I have never seen such an excellent job, I am impressed. truly. Genious!!
Fantastic build and excellently filmed.
This was a very nice video, you did a great job and you explained everything really nicely. Thank you :)
A video I've looking since many months 🙏
Hi, great video, really done well. I'm also planning for a similar build, is it possible to share the drawing of the bracket you made? (so that i can customize it as per my requirement).
Wow. That's awesome. Looks great.
Greetings, thank you for sharing excellent work, you would be so kind to tell me that you soldered or soldered in the back of the controller, thanks from Colombia
Very nice work !!! Good for you !!! I like your scouter!!!
Really nice! why didnt you keep the rear suspension tho?
Man, you rock! I´ll follow your lesson and build one!
Impressive and clean build!
I did exactly the same project few months ago and scooter still going strong. I have overvolted this motor to 75 volts as i have found it was slow on hoverboard battery that is only 36volt nominal. Now it pulls like a horse and peak at 2000wats!!! You should make polyurethane tyre for back wheel as this solid rubber cause lots of rolling resistance and your motor will be hot after few miles. Mine after polyurethane mod runs cool and consume 50%less energy so its a mod worth doing
greg can u elaborate? Isn't easier to replace tire for pneumatic one ??
Olga Piskorska you can't replace with pneumatic tyre as there is no space for tube valve you would have to drill thru hub motor and magnets and then motor stator would prevent wheel from spinning unless you would somehow mods this and route valve to come out on the side of motor. I basicly used polyurethane same material that skate wheels are made off. You can buy kit mix two part like resin and pour into mold and you get perfect low rolling resistance wheel. Please check my channel I have short video showing my scooter partially finished
You have quite a few videos. This one? th-cam.com/video/MdHuvKvgUEE/w-d-xo.html
Rob Roberts yes my friend
Does the PU wheel wear down quickly though?
Very nice work !!! I like your scouter!!! It would be great to have brakes. Brakes is important in crowded places. Maybe add breakes in another movie ;)
Nice work!
That's awesome man. But I was thinking why not mod the stock rear suspension to accept the hover board wheel?!
Either way amazing job on the built.
Because he would have not enough space for the battery & controller ! (unless he copied my technique ;) --- "" did a 350w conversion recently, I made the battery 250wh 7ah 2p10s Mj1 ... I split the pack and placed 4 batteries within each side hole of the chassis rail, as well as 12 batteries in the centre channel, there was also room in the centre channel for the controller ! I still have rear suspension too ! ;) I may copy your battery cover technique !""
Very cool, nice work! I'm inspired to do a similar project now.
Excellent job, through and through. I can do all the steps you did, but not as cleanly as you ! Congratulations. In hindsighting, designing a covered place for the controller inside the brackt would have been the better option. Still, a great build
Fantastic work my frend!! Best Regards from Spain!!!
Красавчик, прямые руки, все очень аккуратно!
Ну мы тоже не плохо делаем th-cam.com/video/E_Yo5i4nRtA/w-d-xo.html
Nice job! I like that its RWD
Great project. Well done.
Very clean build!
Impressive clean wirings.
wow, a genius with this stuff!!
Impressive build and also video production. Keep up, Jehu. Thanx
I am impressed , however why have you not included lights for the front and rear ?.
Very nice conversion. Good work.
Im very impressed. Thank you for the video.
Nicely done and thanks for showing us.
Awesome project!!! Good job! Anyone know how to make the hoverboard motor brake?
Nice work, With the hover board I will make a push unit to latch on the back of the scooter plus a steel cable to tilt the hover board to go forward or to stop. Cut and narrow the fibre glass stand on the hover board as it will not be needed. Presto!!
can you post plans of the hub motor mounting bracket please?
Hi! Awesome build! How did you find the wattage of the motor? I have an old monowheel motor (14'') that I want to use for a big scooter (offroad) project but I'm not sure of which speed controller I must buy... Also I'm worried with the hall sensors because it might not be color coded as the motor is. Did you have this issue? Thanks
That bracket man, sweet...
Amazing. Thanks for making such an excellent video!!
To ask if both wheels are functional.
Just a question for the distance to be covered.
You nailed it.... If you can point me in a direction of a Razor 300 type motor connected to a Yeddoo type scooter with a Shimano Alfine internal 11-speed hub with the electronic gearing. That should be your next project...that was freaking awesome...
Amazingly neat work BUT why did you remove suspension ??? Also i want to see your lion welding tool !!
Awesome Job
What a great built, the best for a long time for me:)
Good job, looks awesome.
Nice job, looks same as i did, but ur video is very detailed and looks more upgraded than mine version 🤗
my respect to you sir, you are very creative.
Awesome!! Care to share the issues that you've found out about this scooter?
Good nice and neat job!
Awesome video my friend 👌 I would really love to also do this Diy project. But I would be a bit scared to go down hills & not able to stop but would there be a way to add some type of brakes etc.?? Thanks: Joseph
Really nice build
My friend, kudos on 1) The build. And 2) The Editing!! Superb. Succinct. Awesome!!!! You should make a video on "video editing".....Lol
Good job, bro!
Very nice perfection is your plus point.
Keep it up have fun with your scooty.
Thanks for sharing this. I’m thinking of doing something with my granddaughter’s hoverboard.
Epic mate thanks for making video
awesome build. i mean, you could buy a xiami scooter for basically the same price and have an app and mod the controller, but i like the idea of learning. things like this i want to do with my kids as they get older so they can learn to figure things out on their own as adults. fun video to watch regardless.
Congratulations !!! Very good work.
Nice work. Excellent explanation
Great, excellent, wonderfull ! Thanks for your dedication!
Nice work, my friend.
So good really enjoyed that. Subbed.
Mad skills! Build a simple car next. God bless , aloha
Nice job! Nice DIY video!
Looks very clean for diy :) gj
Really impress hope to see more electric scooter video
Excellent Work
Hi I am again can you please a video or a plan show how everything is wired please because I would like to copy it
You did awesome dude
GREAT JOB!!!!!!!!! 😀👍
The video was great! In Japan, you can't easily ride an Electric scooters yet. The law is troublesome. I'm looking forward to the video! With love from Japan :)
Very good craft !
Wow not bad. I like your work! I build an electric longboard with hoverboard parts.
Nice build
muy buen trabajo es usted un ingeniero,very good job.
Hey man! Nice clean job! Is your fuse on the negative side of the battery? I usually put it on the positive side. Any particular reason why you went to the negative side?
Cool tho wouldnt be easier to adapt the existing wheel bracket? also did you consider changing the front wheel too for 2WD?
Your a clever guy wish I could make something like this.
super cool!
awesome to build nice work
That's sick! Wish I could do that to my kick scooter but I don't have the skills necessary.
Cool build you look quite familiar with electronics.... I want to derestrict my electric inmotion v5f unicycle do you think you could help
hi, nice video. i have a question, can you share the electric layout? because i see that you put a paralel cable to connect the cable to charge the battery, and other question is when you charge the battery the speed controller has always power. is not better to connect the power switch just before the speed controller and the you will just charge the battery, without any peak cuurent problem during charging? thank you
Very well done informative video!
You can add the second motor from the hoverboard on the back so you have more power
You could get yourself a regenerative braking able controller. It would solve the braking issue while being able to charge your battery as well