That suspension travel absolutely sucks vs stock. Cut that body and get your performance back with the original suspension or better than what you did. Goodness. You threw on a body easily 8x the weight of the original and then you also cut the rear suspension travel in half.... must be climbing curbs at the mall. Or at hobby lobby.... looks cool, but 4 thumbs down for appearance over capability. I bet a 1/24 would out climb that rig.
What an idiot, not all trucks are built the same for the same purposes, plus I bet you didn't check any of it's videos, a 1/24 which I have will out climb 80% of the RC trucks out There, if you watch my channel I build mostly trail trucks because I have leg issues. So building a performance truck is not my priority. I only have 2 trucks that can crawl. And I rarely use them because I can't follow them up a hard terrain. If I were to build a performance truck first of all I would not use a Injora Hardbody, I would not use this chassis, I would use an LCG Crawler chassis With a Holmes hobby crawler motor and reefs servo, and many other different products. Injora Bodies are for scale looks. So before you spout your dumbass mouth. You should know what you're talking about. I suppose I probably won't be able to bash it either or use it in water. Come out n dude, think. I don't mind getting tips for improvement when they make Some common sense 🤔 peace out DUMBASS 😁🤓🙏✝️☮️
Excellent job, really well done, I like it a lot, it is certain that the engine at the front makes things easier but the adaptation of this body is perfect. Even the cutout of the feet of the figures cannot be seen 👍
Hey Jon thanks for stopping by and commenting appreciate it 🤘😎🙏 yes sir the male is a 7.2 inch ww wrestling action figure available at Walmart. 10 bucks. I'll have to get back to you on the girl she's from a special collection. I can't remember right now.
Ok the girl is Piper from the TV show Charmed made by Mego. She is 8 inches the only reason she fits is because the Mego characters have insane articulation. I use these allot but they only fit in certain cars. They are a bit big but I like them because of the varieties available. So many hope this helps. Ask anytime glad to help. Please like and sub
I absolutely love your build mate the way it looks I have got a JK short wheel base hard body on our Chinese replica Glenda 2 chassis I'm using bits and pieces off an sex10 and rc4wd but I found using 80mml shocks makes it look very scaled however I've got a very good mounting system on mine but I think everyone uses but if you cut them to size you don't see it yet it is reliable and strong
@@mypassionrc-studioxd40lous66 and I appreciate you modify the chassis to cater for that body as it's so stupid buying such a nice body and having to cut holes in it for trans and shock towers. You are awesome.
Lots of great information pal always 🥰 watching 😊 just reminded me of the film saw 😂🤣😂 out of all your chassis witch do u find the best to modify to fit a few different types of body's ✌
Great info thanks mate! I like the mods of the servo horns super original nice one! Been thinking of a new body soon for my gen 8 just so many options 🤯🤯 Great video and Awesome pups in the back🐶🖖👌
Thanks buddy appreciate it, Gen 8 platform is my favorite, because you can do so much I have four of them. Plus for 170 bucks there's nothing close to what you get for the money. I bought mine for 133.00 during holidays they usually put the chassis on sale, then you have an open canvas. Thanks again for your support 🙏😎
Good job. I have a Gen 8 I was going to convert, but I now I am going to convert a Wendigo. I had been modifying my Gen 8 body and still want to use it.
Awesome Thank you so much appreciate you stopping by brother 😎🙏 yes I had to shave a little. I like my crawlers as low as possible. I'm not a monster truck guy.🙏😎
Nice how to lou allot of work👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
That suspension travel absolutely sucks vs stock. Cut that body and get your performance back with the original suspension or better than what you did. Goodness. You threw on a body easily 8x the weight of the original and then you also cut the rear suspension travel in half.... must be climbing curbs at the mall. Or at hobby lobby.... looks cool, but 4 thumbs down for appearance over capability. I bet a 1/24 would out climb that rig.
What an idiot, not all trucks are built the same for the same purposes, plus I bet you didn't check any of it's videos, a 1/24 which I have will out climb 80% of the RC trucks out
There, if you watch my channel I build mostly trail trucks because I have leg issues. So building a performance truck is not my priority. I only have 2 trucks that can crawl. And I rarely use them because I can't follow them up a hard terrain. If I were to build a performance truck first of all I would not use a Injora Hardbody, I would not use this chassis, I would use an LCG Crawler chassis
With a Holmes hobby crawler motor and reefs servo, and many other different products. Injora Bodies are for scale looks.
So before you spout your dumbass mouth.
You should know what you're talking about.
I suppose I probably won't be able to bash it either or use it in water. Come out n dude, think. I don't mind getting tips for improvement when they make Some common sense 🤔 peace out DUMBASS 😁🤓🙏✝️☮️
Excellent job, really well done, I like it a lot, it is certain that the engine at the front makes things easier but the adaptation of this body is perfect. Even the cutout of the feet of the figures cannot be seen 👍
Thank you so much appreciate you stopping by brother 😎🙏Thank you for your consistent support
@@mypassionrc-studioxd40lous66 😊👍
Thank this informatio
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Please tell me where you got that bumper, it's exactly what I'm looking for
Thank you so much for stopping by 🙏😎
www.amazon.com/dp/B00UN71022/ref=cm_sw_r_cp_awdb_imm_ETGJP1PWB1MGSPS4WBGR?_encoding=UTF8&psc=1
great information and build,it's ok to be a stubby....lol
Hehe 😁Thank you so very much appreciate you tuning in and commenting 🙏🏜
Just cut the old feet off . Really nice work nice work clean fit for shore I didn't mind the long video lots of cool stuff info etc 👍👊
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Mine is ruined😂 good skills and information👍👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Very interesting vidéo 👍😉 good job 👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
So good
Cool rubicon 👍🤩👍great ~~~
Thank you so very much appreciate you tuning in and commenting 🙏🏜
What name of metal you use from home depot
Don't remember it was almost 2 yrs ago.
It's 8x11 inch tin check near the gutters
Section 🙏☮️✝️ thanks for visiting
wow how cool his rc friend👍👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Well done and very informative.
Thanks so much appreciate the visit 🙏✝️☮️
good job nice bro 👍👍👍👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Super like my friend 👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
thanks for sharing bro
Your welcome, thanks for tuning in 🙏😎☮️✝️
Great vidéo my friend , well done 👍😉
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Nice info Dude, good advice👍👍💯
😁Thank you so very much appreciate you tuning in and commenting 🙏🏜
Impressed. Good work.
Thank you so much for stopping by and commenting appreciate it 🙏😎
Nice 👍 information bro I like your style I absolutely love this Jeep body on the Gen 8 chassis looks awesome 🔥👌
Thank you so very much appreciate you tuning in and commenting 🙏🏜
wow Very cool 💯💯💪💪👏👏
Thank you so very much appreciate you tuning in and commenting 🙏🏜
What size figures did you use?
Hey Jon thanks for stopping by and commenting appreciate it 🤘😎🙏 yes sir the male is a
7.2 inch ww wrestling action figure available at Walmart. 10 bucks.
I'll have to get back to you on the girl she's from a special collection. I can't remember right now.
Ok the girl is Piper from the TV show Charmed made by Mego.
She is 8 inches the only reason she fits is because the Mego characters have insane articulation. I use these allot but they only fit in certain cars. They are a bit big but I like them because of the varieties available. So many hope this helps. Ask anytime glad to help. Please like and sub
Alot of useful information as always. That Jeep body incl the driver figures looks so nice :)
Thank you so very much appreciate you tuning in and commenting 🙏🏜
I absolutely love your build mate the way it looks I have got a JK short wheel base hard body on our Chinese replica Glenda 2 chassis I'm using bits and pieces off an sex10 and rc4wd but I found using 80mml shocks makes it look very scaled however I've got a very good mounting system on mine but I think everyone uses but if you cut them to size you don't see it yet it is reliable and strong
Thank you so much for stopping by and commenting appreciate it 🙏😎
Very nice video. Thank you
Thanks so much appreciate the visit 🙏☮️✝️
@@mypassionrc-studioxd40lous66 and I appreciate you modify the chassis to cater for that body as it's so stupid buying such a nice body and having to cut holes in it for trans and shock towers. You are awesome.
@@zainosmodifiedrccarscrawlers
thanks buddy, very kind, yes very true I hate to ruin the body. 🙏☮️✝️
Nice video. Jeep looks awesome.
Thank you so very much appreciate you tuning in and commenting 🙏🏜
You did an awesome job to make the Jeep body fit,you know when you loose the war, you are defeated,😆
Thanks James I only pick battles I can win 😁🙏🏜😎
Lots of great information pal always 🥰 watching 😊 just reminded me of the film saw 😂🤣😂 out of all your chassis witch do u find the best to modify to fit a few different types of body's ✌
Hey Paul, thanks buddy for always supporting. I like the Gen 8 best. very versatile chassis.🙏🏜😎
Thanks pal 😊👍
Good stuff. Really turned out great 👍
Thank you so very much appreciate you tuning in and commenting 🙏🏜
Great info thanks mate! I like the mods of the servo horns super original nice one!
Been thinking of a new body soon for my gen 8 just so many options 🤯🤯
Great video and Awesome pups in the back🐶🖖👌
Thanks buddy appreciate it, Gen 8 platform is my favorite, because you can do so much I have four of them.
Plus for 170 bucks there's nothing close to what you get for the money.
I bought mine for 133.00 during holidays they usually put the chassis on sale, then you have an open canvas. Thanks again for your support 🙏😎
No worries brother hope you are having a great week 👌🖖🐶
Good job. I have a Gen 8 I was going to convert, but I now I am going to convert a Wendigo. I had been modifying my Gen 8 body and still want to use it.
Also, looks like you shaved the front shock towers a bit.
Awesome Thank you so much appreciate you stopping by brother 😎🙏 yes I had to shave a little. I like my crawlers as low as possible. I'm not a monster truck guy.🙏😎
I think it looks fantastic Lou. 👍
Thanks again buddy appreciate it 🤓🙏