Code overtime lol!!, What a smashing informative how to video, another indication pointing to the dedication and knowledge Dynodaze have when looking after your vehicle, its so refreshing to see and watch. Brilliant lads. loved it
Great job rich and Danny. I've been looking at this kit. Looks lovely when fitted. I was almost 95% sure I was going turbo, now uve thrown a spanner in the works 🙆♂️😆
#5.30 #overtime 😂😂 Great video guys 👍 really enjoyed that and really informative. Learning from the master. Great to see the other side of Dynodaze workshop 🏆
Your vids are certainly progressing OVER TIME. I loved this and sure it will be invaluable to anyone else who buys this and tries to fit it. The dead-pan under the radar delivery of the "potential hamster tube" made me laugh as much as the slam of the door by Richard at the end. Packed full of information and fun. Perfect combo.
Was the code word over time or over tired lmao, great work guys, very informative. Dans cheeky little laugh at Richard ford joke, which to be fair is more of a fact than a joke lol made me giggle.
What a fantastic video...i LOVED THIS!! so satisfying to watch this make such a monster HP difference. i really like how meticulously its fitted to your satisfaction... you guys do amazing work...if i had you in my country id certainly use you guys- no doubt. i have heard of rotrex blowers breakin the input shaft due to stress of the tensioned belt. ive heard Rotrex make them buy the new blower and wont stand by to warranty the product...have you ever heard of this?
code OVERTIME great work guys, makes me want a s/c kit for my ep3 even more now, rough ball park of cost of fitting with all the messing and modifying you had to do?
Great vid guys, more garages should make videos like this, I am with you guys if you buy a 'kit' I would expect it to be a complete bolt on procedure where everything fits without modifying parts and they should provide clear and precise instructions! Wonder what TTS will say 😆 Quick question would this kit work with a Mugen type airbox and air feed scoop coming from the front grille? Or would you have to use their induction kit?
Thought so 😆, I bet it would be a right pain to fabricate some pipe work for me to keep my airbox, if I went for a rotrex kit looks like it would be the top mounted version, suppose I could keep my aircon then too 😆 Great videos though guys, keep up the good work 👍
Cheers, I have an FC Design air box and scoop which are made by a company in Belgium, its pretty much like a Mugen airbox but uses an ITG air filter inside the box and the scoop sits behind the front grille which is a much larger scoop than the Mugen, I really like this airbox and would want it to stay on, I don't know if any other UK EP3 has one fitted so its rare too, I like to be a little different 😆.
I'm assuming it was still mapped on the hondavert board with the charger?? What kind of power have you seen with the c3094 top mount intercooled tts kits?
Code overtime lol!!, What a smashing informative how to video, another indication pointing to the dedication and knowledge Dynodaze have when looking after your vehicle, its so refreshing to see and watch. Brilliant lads. loved it
Thanks Daz R
Overtime - Really enjoyed this Dan Rich perfect for a Sunday
Glad you enjoyed it
THIS is how you do it guys! Awesome work!
Very informative and great to watch!
Thanks buddy
That was awesome!! Nice overtime boys! Watching that live dyno graph shoot up was wicked!! Used to seeing a smaller increase with the NA ones!
Haha yea was dramatic
5:30 on Friday brilliant vid
Appreciate the work gone into fitting one of these. Eye opening
Thanks man
Great video dan and rich, very interesting watch. Good to see the OVERTIME been put in 👍.
Thanks 👍
Overtime , great video guys, 🔥
Brill video and a great Gide to fitting a supercharger look forward to seeing you both on the next one
Thanks Steve
Great job rich and Danny. I've been looking at this kit. Looks lovely when fitted. I was almost 95% sure I was going turbo, now uve thrown a spanner in the works 🙆♂️😆
happy to help if we can
@@DynodazeHondaTuners cheers appreciate that. Still need to get in and underseal her for me. Just had alot on atm.
@@jelly12903 happy to help when ready
#overtime
Loved this one guys great watch 👌
Awesome video what a build 🔥
Appreciate it
Epic one of my favourite videos, please do more like this with Rich :)
Will do!
Brilliant content 🤙enjoyed watching this!
Thanks Chris
#5.30 #overtime 😂😂 Great video guys 👍 really enjoyed that and really informative. Learning from the master. Great to see the other side of Dynodaze workshop 🏆
More to come!
Great video, sounded nuts on the dyno 😎👍
Yeah ace car this
Your vids are certainly progressing OVER TIME. I loved this and sure it will be invaluable to anyone else who buys this and tries to fit it. The dead-pan under the radar delivery of the "potential hamster tube" made me laugh as much as the slam of the door by Richard at the end. Packed full of information and fun. Perfect combo.
Hahahah :)
Wicked video guys liking the I'm depth type of vid 👍 nice work from rich keep up the videos ! 👍👍
Thanks! Will do!
One of your best vids to date. Enjoyed watching it all even tough im a team mitsubishi boi😄
Glad you enjoyed!
another great video from the dynodaze team ', this really advertises the skills of your company . well done lads
Thanks Mark
Great video guys, fair play Rich top work. Nice bit of OT for ya.
Glad you enjoyed it
Very helpful and informativr guide, keep up the goodwork lads.
Thanks DnoteG we will keep doing it buddy!
Brilliant Guide chaps!
Thanks man loving your new motor
@@DynodazeHondaTuners Thanks Buddy, it’s a handful 😂
Absolutely wicked! It’s videos like this that make me want to do mine more!
Overtime 😂✌️
It’s a good passion we have
I use it as a great excuse mate, tell the mrs I spend on the car to keep me off beer and drugs as I can’t afford them after ✌️😂
@@Matty_Champwhite I like your style
Was the code word over time or over tired lmao, great work guys, very informative. Dans cheeky little laugh at Richard ford joke, which to be fair is more of a fact than a joke lol made me giggle.
Hahahahah :)
over fkin time cheers guys 🍻
What a fantastic video...i LOVED THIS!! so satisfying to watch this make such a monster HP difference.
i really like how meticulously its fitted to your satisfaction... you guys do amazing work...if i had you in my country id certainly use you guys- no doubt.
i have heard of rotrex blowers breakin the input shaft due to stress of the tensioned belt.
ive heard Rotrex make them buy the new blower and wont stand by to warranty the product...have you ever heard of this?
We have had no issues at the minute .
Not heard that so far buddy like Rich says
@@DynodazeHondaTuners ok...250 foot pounds torque...what an immense number...whats the torque limit the stock k20 can handle reliably?
@@lexzenis2544 300ftlb
Loving the longer vids very informative….. typical man needs no instructions lol 😂
More to come!
@@DynodazeHondaTuners
👍
This is a great informative video.
Glad you think so!
You’d like to think they’d route the air filter to the open space made from removing the intake
agreed
code OVERTIME great work guys, makes me want a s/c kit for my ep3 even more now, rough ball park of cost of fitting with all the messing and modifying you had to do?
drop us an email pal
What's your average coolant temps whit that setup i have a CL7 Euro R swap in my Ep3 and im going to be doing the Rotrex Full Race Kit
Love the video
thanks
What kind of MPG will this run now on boost compared to say an FK8 Type R
@@The-KeyserSoze if you are asking that question 🙋 you don’t want to play
Decent video🔥🔥
Thanks man
Great vid guys, more garages should make videos like this, I am with you guys if you buy a 'kit' I would expect it to be a complete bolt on procedure where everything fits without modifying parts and they should provide clear and precise instructions! Wonder what TTS will say 😆
Quick question would this kit work with a Mugen type airbox and air feed scoop coming from the front grille? Or would you have to use their induction kit?
their induction for sure
Thought so 😆, I bet it would be a right pain to fabricate some pipe work for me to keep my airbox, if I went for a rotrex kit looks like it would be the top mounted version, suppose I could keep my aircon then too 😆
Great videos though guys, keep up the good work 👍
You could make you own induction kit up no issue.
Cheers, I have an FC Design air box and scoop which are made by a company in Belgium, its pretty much like a Mugen airbox but uses an ITG air filter inside the box and the scoop sits behind the front grille which is a much larger scoop than the Mugen, I really like this airbox and would want it to stay on, I don't know if any other UK EP3 has one fitted so its rare too, I like to be a little different 😆.
I'm assuming it was still mapped on the hondavert board with the charger??
What kind of power have you seen with the c3094 top mount intercooled tts kits?
Yes buddy Stay tuned as we answer that this year
@@DynodazeHondaTuners look forward to it, id like to supercharge mine but wanna keep the aircon for the summer lol
What would you roughly charge for a fitting on this kit plus proper mapping?
Drop the facebook page a message Richard will quote
@@DynodazeHondaTuners OK bud
hello the tts sport kit can this be fitted with a tegiwa crankshaft pulley which is already installed on my car?
Yes however ide consider fitting a standard honda part instead
would you guys be up for installing a turbo kit on my ep3 in the future? :)
Of course buddy happy to help
so you cant run AC at all, with a supercharger?
This rotrex c30 series?
cheers guys great vid and content again, the FN2 is still shit though 🤣
Lols the FN2 rocks!
@@DynodazeHondaTuners as long as it's a type r 😉👍🏻
Hey do you guys know what size pulley is on the charger
Will come back to you
110mm
So what sort of power would you be expecting rough with a 100mm or even a 95mm pulley
HALF PAST 5 AND OVERTIME‼ SO DO I GET A DOUBLE DISCOUNT NOW LADS ✌🏾🤣👍🏾
can u make list what parts u buy?
We can sell you a kit
price
@@jonnepaporatsi8088 sure message ys
overtime
Interesting
Thanks
25:50😂😂😂
5:30
Whats that?
@@DynodazeHondaTuners its the code word you said for everyone makin it to the end of the video.
It's almost like a bolt up and play kit lol give or take chopping and cutting everything 🤔🤫🤣
Hahahah
That filter being that low scares me 🌧💦🔥🔥🔥🔥
hmmm yes, super soaker on wet track day
The irony of the title lol
23:09 exhaust leak by the extension, under door