You can run it with stock injectors but you’ll be limited on how much power you can add after e85.. you’ll max out the stock injectors eventually.. I maxed mine out with just cold air & e fans so that’s why I recommend 50lb injectors
@@elgalloloco_ I have a cammed LQ4 with small chamber 862 heads. It's a true 10.4:1 compression. I'm thinking I can pick up a little over the 93 octane E10 that it currently runs on. It should definitely pick up when I swap in the LQ9 with milled 243s. (Should be a little over 11:1) Thank you again for all of the part numbers and links. I'm just trying to decide how I want to do my fuel line connection. I have a TBSS intake, stock return less rails, Corvette fuel filter. All that keeps it a return style system. Just need to figure out how to not overcomplicate it and not make things too busy in there.
All I want is the flex fuel ability I have flex fuel injectors from a newer Chevy and when I install the flex fuel sensor kit will I need a tune? I’m 100% stock don’t really want to tune it if I don’t have to
Hey bro where’d you get the sensor from im tryna convert to e85 on mine i got a lot of work done to mine but stuck on the e85 conversion process or where to get the sensor
E85 ftw! Free game forsure! Can’t wait for mine😌
Coming soon brother 😎
Baddest 4.8 in cali no cap 🔥🔥 cant wait to see how she run with the new tune 💪
Right on brotha I appreciate that 😎 she gone be running hard Fashoo once she gets tuned
Just the video I needed to get the E85 switched over. I was thinking you have to change the fuel pump.
I'm curious if these fit tbss/ nnbs intake manifolds? Got some as an early Christmas gift.
Thank you for dropping them links!! Been tryna find those pigtails since forever
Yessir I got y’all 💪🏽
Where did u get the fuel injectors ?
Good work 👏
Thanks I appreciate it 🙏🏽
Just course man, how much HP you making to the wheels? 🤔
Where did u get the harness? I need wire and pin for my 08 Silverado
Amazon
Did you run with it with the original pcm or did you have to change it for another one?
Pinned it to the original PCM
Where do u suggest getting injectors from?
Any trusted parts site. Michigan Motorsports , summit racing etc or used from wrecking yard
Parts list?
Where did you go to get it tuned??
I have a tuner that takes care of my trucks. Check out the video after this one is when I got it tuned..
Does this exact setup work for the 03-06 nbs ?
Yessirr
Are upgraded injectors needed when running this set up or can you run it with stock injectors
You can run it with stock injectors but you’ll be limited on how much power you can add after e85.. you’ll max out the stock injectors eventually.. I maxed mine out with just cold air & e fans so that’s why I recommend 50lb injectors
Hey bro do I have to tune it? And can I run also 91 gas ?
Yes you must tune it to activate the sensor & also tune for it to run on e85 but with the sensor you can run 91 or e85 whenever you want at any time
What year is this truck? I'm thinking 2001 or 2002. Thanks for the video, doing research now for this mod on my 2001.
2001 & thanks for watching, it’s worth it imo.
@@elgalloloco_ I have a cammed LQ4 with small chamber 862 heads. It's a true 10.4:1 compression. I'm thinking I can pick up a little over the 93 octane E10 that it currently runs on. It should definitely pick up when I swap in the LQ9 with milled 243s. (Should be a little over 11:1)
Thank you again for all of the part numbers and links. I'm just trying to decide how I want to do my fuel line connection. I have a TBSS intake, stock return less rails, Corvette fuel filter. All that keeps it a return style system. Just need to figure out how to not overcomplicate it and not make things too busy in there.
@@bluecollarhotrods9781how did you end up doing it with the tbss intake I’m running with the same thing
@@carlosramirez9075 Corvette fuel filter and some AN fittings that adapt/connect to the factory fuel lines.
What’s up pa, are the 50 lb injectors necessary for the e85 conversion?
Not mandatory but you will max out the stock injectors right away with the e85 so you won’t be able to add more power without changing injectors
@@elgalloloco_ do you now the part # for the injectors bro, looking for them now but wanna make sure i have the right ones
@@efrainalvarez9541 I don’t bro tbh but I do know they are Delphi injectors so try going with those 🙏🏽
E85 sheeesssshhhhh
🌽😎
All I want is the flex fuel ability I have flex fuel injectors from a newer Chevy and when I install the flex fuel sensor kit will I need a tune? I’m 100% stock don’t really want to tune it if I don’t have to
Yea your gonna have to get a tune to run the E85
I’m trynna e85 my 4.8 too🥲
whos your tuner? 🔥
Hey bro where’d you get the sensor from im tryna convert to e85 on mine i got a lot of work done to mine but stuck on the e85 conversion process or where to get the sensor
I got mine from Amazon
I need to go e85 fuckin 93 is like 6 dollars bro 😒
Fine I’ll go e 85 jeez
Promo-SM 🤔
Will be doing this setup soon thanks to you 🤙🏽🤙🏽 good shit bro keep up the badass content 🔥🔥 new Sub 😎 if u have ig ill hyu there for this setup
You won’t regret it 🔥 appreciate the sub & support bro 💯🤝🏽