2007’ Suzuki SX4 Hesitation Off Idle (Slight Stumble @ Idle) P2-2
ฝัง
- เผยแพร่เมื่อ 23 มิ.ย. 2024
- Simple issue sent my mind spiraling down the rabbit hole of possibilities.
Both vehicles in video are 2.0L gasoline, 5 spd M/T.
Thx to all who took the time to offer suggestions.
“Thoroughly” even with spell check I still can’t get it right 🤣 - ยานยนต์และพาหนะ
Its like watching a main dealer at work 👍😁.
🤣 Start swapping bits. You’ll eventually fix it 🤣 Cheers Iain
huge luxury having a spare car for parts swapping
I like the mechanical hand👍
Certainly is. You were one of the few who called it Denis. Thx for your suggestions and watching 🍻
Very interesting! I was always under the impression that when the MASS sensor was bad, the fuel trims would get worse at higher RPMs. This proves just the opposite in this case. Maybe the other scenario is when you have a dirty MASS. Thanks for posting this one, it was very informative!
Thx Bob. Yeah I learned a little on this one. Thx for watching 🍻
Nice find…I’ve had more and more issues with “quality” name brand aftermarket parts, especially sensors.
Frustrating. False economy to cheap out. Don’t know how many times I have seen this movie and still not learned the lesson. Being a cheap bastard is expensive at times 🤣 Thx for watching Brian 🍻
Heres a question; how would you have proceeded if you did not have an identical vehicle available?😉😉
Good question 🤔 I had my suspicions about the MAF idle value. Likely injector balance test and then endoscope the intake manifold for restriction (carbon buildup). Thx again for watching and your comments 🍻
I saw a similar aftermarket MAF sensor case study, 99 Subaru Imprreza, a Subaru Top tech chased his tail, had break-out leads installed, scoping, measuring, gathering data, forget the rest, but he eventually installed an OEM MAF, all fixed.
@hnd2893 Not the first or the last. 🍻
How long ago did you install the Delphi MAF?
From my experience, aftermarket MAFs are a waste of time, if they work at all out of the box or last any reasonable time, they're a waste of money.
I quit using aftermarket sensors years ago.
Genuine Bosch, Denso, or Hitachi is the way to go. And I'd avoid purchasing from Amazon or eBay, lots of counterfeit stuff floating around these days.
Couple of years back. Only recently did my Son report the stumbling. As usual… false economy to cheap out. Thx for watching and your comments 🍻
@@TheGibby3340 A couple of years, not bad, you got your monies worth. 🤪
Your son probably delayed reporting the symptoms for fear of not having his car due to its YT production value 🤪
🤣 Maybe.
Both of these cars have the two liter right? I've heard the rule of thumb that the grams per second at warm idle should be just slightly above the displacement in litres. In case you don't have a known good part... or car for comparison!
Looks like a Bendin reference 😁
Yeah both are 2.0L gasoline. The only engine option in Canada are far as I know. That rule of thumb sounds about right. Thx for watching 🍻