I worked in car parts for a long time, every year we split oil filter brands apart to compare them, Ryco and wix are the best quality. Fram doesnt even use a coil spring in them like everyone else..its a small piece of pressed bent metal and the filter paper looks like toilet tissue. DONT USE FRAM. (as you seem to know!)
@@corwinweber693 Wait, We haven't? Are we not in on the goddamn Kaboutertjes'? Wait..... Maybe zijn we dat ook niet. Je kon weleens gelijk hebben. Hah. I found his secret. Halfway down your sentence you just dip into your native tongue for a bit (and only for a bit mind you). If your native is not European just throw in the word Stroopwafel every third sentence, till you pick up more words, and it'll come right back to ya just like riding the village bike. *Ugh... I blacked out for a second..... What happened?
@@FroggyMosh But English IS my native language.... I mean I could lapse into poorly remembered Spanish briefly, but..... I don't remember all THAT much of what I studied...
Stabbing has been a time honoured traditional Glasgow greeting since time immemorial. Yet suddenly the kids are doing it in suburban London and everyone pretends to be shocked.
The anti-gang/knife crime stuff being implemented in Glasgow is really impressive. Who'd have thunk that actually talking to the (often) young guys and trying to solve the root issues of why they are carrying chibs does more good than trying to ban everything up to an including having hands.
Holy shit,I just found somthing AvE didn’t know about! The fan guards are to keep animals from getting in. I’ve cleaned more pieces of dead cat out of grocery store Generac generators than any one Man ever should have too....
Mr Olsen seriously, I usually don’t understand what he’s saying but I love the jokes. Reminds me of holding the flashlight and getting cussed at while my dad beats the Chevy
Lovin' this channel. Just subbed today. Love the knowledge and humor. This generator action reminds me of when I found a Generac generator at a yard sale a couple years ago. A simple 6.5 horse gas powered 2000 watt jobby that the guy had up for $100. Said he hadn't run it in a couple years. I gave it a pull on site and it wanted to go but the guy told me that as he was getting it out for the sale he tried to run it and it wouldn't fire up more than a chug or so. I bought it knowing that all I had to do was clean the carb and fuel system as it was most definitely gummed up by old fuel. And damn straight, that's all it was. Cleaned everything up, fresh gas, and fresh oil and now I have a nice little electric power source for home or my truck when I need it. Cheers!
I worked on Generators from 1969 to 2016 then retired. I worked mostly on Cats but unfortunately did have to work on some Genercraps. Watching this caused the PTSD of Genercraps to resurface. I am out back hugging my Chinesium 1 lunger till the shakes go away. Merry Christmas
As an apprentice I used to bolt dirty marine diesel generators together. Many many specifically torqued bolts. I remember having 30 machines lined up in a shop waiting for me to torque the genny onto the engine. Many hours of melancholy
I know full well why this was a voice over episode... I can just imagine all the sudden onset tourettes going on in there, and the newly minted cuss words.
Having just spent a month splitting my tractor to replace the clutch and find the frigging broken seal that was running oil to the centre of the pressure plate. It is a joy to sit back and watch someone else pulling apart a lump of cast iron. Superb stream of conscious commentary, more laughs in 15 mins than I had in that month. Dewclaw should be a fixture.
Weird timing... Just this morning, I was just watching that 80's CAT safety video 'shake hands with danger'...loved the production quality, found it comical and informative. it's shocking to see how many people don't take the time to be situationally aware and nothing has changed in 40 years. Like you say in your videos, you always gotta be thinking about what could kill you next.
I seen the block at the start and instantly though "hhmmm that looks a hell of a lot like a mitsu engine." I hate when I'm right, so many mitsu's dying but I still love them. Can't wait to see the rebuild vidjahs AVE!
i wonder why those fire fighters used them expensive weight saving bearings on a stationary generator? those are usually only good for 6 figure trophy trucks
Love your videos. Clearly super intelligent with more experience then most in material chemistry and engineering. Considering myself a few of the enlightened I would like to advise that this newer video sounds more written than said. And said is the genius of your talent.
@@Sai.Hottari Nope, induction hardened bearing surfaces, a hot spun bearing should have had similar colour on the rod end cap. Notice the next journal alongside has the same colour spread, but no damage. Dang clever these Japanese.
I'm, not a machinist, mechanic or a nothing in any industry in topics shown in this channel. But the rhyme word replacement, subtle innuendo, and general "over doing it" cracks me up everytime. One of the very few TH-camrs I click like BEFORE I watch the video. I don't even know enough about what you are saying to know if it's not all complete bullshit! Keep up the good work ;)
Always Informational and entertaining. Your content is breath of fresh air from the abundance of useless information supplied on the internet. Thanks for being on here!👍
Spending many years in the diesel technician world I’m enjoying this series! I did Cats and Cummins mostly though. Since I worked on semis. But did a couple Mercedes and Mac over the years as well!
Merry Christmas to you and your family. Please keep the scientifically correct and politically incorrect videos coming at a rapid pace! Merry Christmas to Dewclaw and his family too!
Found your channel a couple days ago... Dude, I don't think there's a channel on the TH-cams with a higher laugh/minute ratio if Gentle Watcher can follow along with your Canuckistan mode of speech... Love the channel, Merry Christmas!
Ave thanks for the year again of great knowledge and great laughs.... it's always fun to watch a fellow 200 lb gorilla beating on the knuckle buster.... Merry Christmas to you und you Familia.... and to all who watch this great man beat farstners into place....
You know what? I think someone about a half a decade ago took a shortcut. Just because it's that particular bearing. I think someone skipped a maintenance period and thought he could get away with it. It's the one bearing that lines up with the oil sump and would be a pain to replace. I'll bet he skipped it, and found another job the next week.
There are only 5000 10mm sockets and wrenches in the whole world. They keep selling you the ones that find their way back to their birthplace. It's a never ending cycle. The buggers are alive and they dont like being away from mom for too long.
HEY! - I thought you were making all them words n stuff up. But, I read me the service sheets on how to do this, and wouldn't you know it, it's word for word what you said.
Yes I'm one of the guys who described to your Channel I enjoy song somewhat really doesn't do anything for me but I'm still happy to have your channel I'm wishing you and your family a very merry Christmas and the cheers with a beer I should say freaking beer
Your diction reminds a wee bit how jack Kerouac wrote, minus the complete drunkenness. This is a compliment of the highest regard. Its most entertaining and enlightening to listen, observe, laugh, and commiserate. I just dig it man. Many many thanks.
Merry Christmas and thanks for taking the time to upload these videos, I hope too see you guys continue work on this engine. Just by watching this content you can learn so much.
I’m finishing hooking up a generac generator for my house today. I have an electrician coming out to the farm today to complete the connection. It’s a bit smaller than that monster, only 32kw and LPG but it should run everything here just fine. Have to get ready for hurricane season. Good luck with the project.
I know right every time I have to touch an infernal combustion contraption it's so many layers thick in baked on shmoo you gotta blast it for ages to find the nuts.
Shaking hands with danger. Almost shed a tear on account of the brain pixies what remember those VHS tapes way back in my Lincoln Technical Institute days. When I was young and still had sufficient cushion between my vertebrae.
I replaced a single rod bearing in a Mitsubishi 4g64 engine in a Mighty Max truck that had been knocking.. My little bro is still driving it still works fine. Send it!
@@agentjwa No, if it eats a new bearing quick you were already out much more for a full engine rebuild including probably a crankshaft and at least 1 rod, but that's also the point you were basically at when it started knocking especially if you didn't tear it down IMMEDIATELY when noise stared. Anyway, I carefully polished that crank journal first with fine sandpaper/WD40/shoelaces to spin the paper, and the rod was still fine, and I did end up replacing all 4 rod bearings. 4G swap the world..
I have an adaptor to allow the 2.6 car block to be installed aith the 4x4 /diesel transmission due to split cylinder wall and cracked head and no 4x4 cores to be found.
13:45 Never saw discoloration on a crankshaft like that before...not that I rebuild engines. Looks like some new form of heat treating: selectively localized, intense, and unintentional.
i can't believe how much good faith he's putting into actually communicating information to the audience in this vid instead of jibber jabbering and wasting our time with double entendres like an R rated Ned Flanders
Wow.. the amount of blueing on the connecting rod caps indicates thermonuclear heat!! Bet all the rod ends are out of round by more than 1/10th.. Can't wait to see the crank journals. Wait till you get a price on a new oil pump. That will end the rebuild budget in a hurry if it's beyond cleaning... Happy New year 🎉!
Ah that knockety-clickety. As a long time viewer, fan and car mechanerd, 't is nice to see you work on anything resembling what I come aboots here in the shop in the Dutchlands. Car engines are just daintier. Fiddely. With this kind of a big job, denk ik dat jij een grote bier verdient hebt ;) Enjoy!
3 steps back, one step foward.. so true, Glad to see your PhD is coming in handy.. some day I would like to see a BOLTR on a Chonda small engine vs the real version.
Can't wait to see this mean machine rebuilt and throbing again
That sinking feeling when you realize the text to your wife went to the wrong spot.
@@arduinoversusevil2025 it cleanses the soul, new beginnings and so forth
Hehe, throbbing. 😅
Interstellarsurfer I don’t want to see any throbbing in an an AVE vijeo
@@AndrewSteffenHB patron, geeeeze still people asking this??????
Spun bearing and fram oil filters go together like chicken nuggets and bbq sauce.
Man, -no shit about that.....
go back and watch part 1. unit was purchased DRY
45 years used them never had a issue in marina or trucks?
@@Nudnik1 fucking internet comment scientists, amirite?
I worked in car parts for a long time, every year we split oil filter brands apart to compare them, Ryco and wix are the best quality. Fram doesnt even use a coil spring in them like everyone else..its a small piece of pressed bent metal and the filter paper looks like toilet tissue. DONT USE FRAM. (as you seem to know!)
Knock knock.
Who’s there?
Cylinder 3
I'ma tell ya one thing, the computer generated caption algorithm has not figured out AvE speak yet.
Neither have most humans.
That's why we watch. :)
I barely done myself
It's British Columbianeze. We all of us talk like that.
@@corwinweber693 Wait, We haven't? Are we not in on the goddamn Kaboutertjes'?
Wait..... Maybe zijn we dat ook niet. Je kon weleens gelijk hebben.
Hah. I found his secret. Halfway down your sentence you just dip into your native tongue for a bit (and only for a bit mind you). If your native is not European just throw in the word Stroopwafel every third sentence, till you pick up more words, and it'll come right back to ya just like riding the village bike.
*Ugh... I blacked out for a second..... What happened?
@@FroggyMosh But English IS my native language.... I mean I could lapse into poorly remembered Spanish briefly, but..... I don't remember all THAT much of what I studied...
Stabbing has been a time honoured traditional Glasgow greeting since time immemorial. Yet suddenly the kids are doing it in suburban London and everyone pretends to be shocked.
A chibbing
Thomas English bumboy
The anti-gang/knife crime stuff being implemented in Glasgow is really impressive. Who'd have thunk that actually talking to the (often) young guys and trying to solve the root issues of why they are carrying chibs does more good than trying to ban everything up to an including having hands.
the londonnistanners stab to kill, in glasgow they would just stab you in the arse.
That's not all they're doing these days. The UK is a world leader in acid attacks too. Cultural enrichment
Everyone tells me the glitter oil I run looks expensive. Truth is its actually very reasonable. 😂
I am not to sure main bearings are "CHEAP" so I would say your GLITTER OIL IS expensive (-:
$50 for some glitter oil? Cheaper than getting regular oil from the dealershit
That's a Generac, not a Caterpillar. You can shake hands with danger all you want.
You can shake hands with anybody...except that guy that was changing the pin on the lift arm
Love the old safety videos. Wish they still made them like that.
@@rustyshackleford531 you can, but it's frowned upon!
@@bigb7157 pretty sure the guys on the scrapers rattled their brains clean out
@@rustyshackleford531 You can still shake hands with that fella, even from across the room! Just don't 'spect him to shake back.
Holy shit,I just found somthing AvE didn’t know about!
The fan guards are to keep animals from getting in. I’ve cleaned more pieces of dead cat out of grocery store Generac generators than any one Man ever should have too....
Gotta love those equipment safety videos from the late 70's
At least ole "Three-Finger" can still count to safety-third.
A wise man once told me there ain't no prom queens goin' out with a guy named stubby.
Lawnmower episode?
Unless Stubby's Dad is a millionaire. Then as long as he can pass certification as human...
Some women prefer the Ron Jeremy type, some prefer the Gene Simmons type. My wife is definitely the latter.
Depends which part is a stubby.
5Rounds Rapid I never heard that Ron Jeremy had to worry about a callback. He always got the job done first time.
The old Cat training video, lol. "Shake hands with danger."
Well done, sir.
This is like watching a mechanic dokumetary a reality show and listen to a stand up comedy at once!
Hahaha 😂
I Love it! 👍👍
Mr Olsen seriously, I usually don’t understand what he’s saying but I love the jokes. Reminds me of holding the flashlight and getting cussed at while my dad beats the Chevy
A real time saver!
@Brian Hopper
Hahaha 😂😂👍
You just light My bad day up!
Hahaha 😂
AvE is always a good time. The phrases he comes up with...
My ribs are literally sore from laughing. This guy is truly funny.... and whip smart.
Always good to see a man and his son sharing life experiences.
I feel you on those exhaut bolts. I pulled the manifolds off an '84 international and the fucker before me put antisneeze on em. God bless em
As a engine builder ,AvE you make me laugh ..love watching ,you are a true RENAISSANCE man .
Lovin' this channel. Just subbed today. Love the knowledge and humor. This generator action reminds me of when I found a Generac generator at a yard sale a couple years ago. A simple 6.5 horse gas powered 2000 watt jobby that the guy had up for $100. Said he hadn't run it in a couple years. I gave it a pull on site and it wanted to go but the guy told me that as he was getting it out for the sale he tried to run it and it wouldn't fire up more than a chug or so. I bought it knowing that all I had to do was clean the carb and fuel system as it was most definitely gummed up by old fuel. And damn straight, that's all it was. Cleaned everything up, fresh gas, and fresh oil and now I have a nice little electric power source for home or my truck when I need it. Cheers!
I worked on Generators from 1969 to 2016 then retired. I worked mostly on Cats but unfortunately did have to work on some Genercraps. Watching this caused the PTSD of Genercraps to resurface. I am out back hugging my Chinesium 1 lunger till the shakes go away. Merry Christmas
Everything about this engine removal looked safe
With safety third you better believe it!
Ah the magic of editing
I felt no danger whatsoever watching from my rocking chair...
Especially around 12:00 or so...
unironically seems fine to me, compared to my work.
t. boat builder
As an apprentice I used to bolt dirty marine diesel generators together. Many many specifically torqued bolts. I remember having 30 machines lined up in a shop waiting for me to torque the genny onto the engine. Many hours of melancholy
Secretly you enjoyed it. The only thing your boss thought you were good at.
You got tagged for that duty cause your Boss knew that you'd do it correctly and not mess it up.
What a waste. Grab an Impact and uggadugga them bitches right into their home.
I know full well why this was a voice over episode... I can just imagine all the sudden onset tourettes going on in there, and the newly minted cuss words.
I minted a few myself and engaged safety squints when he lifted the engine with that sketchy come-along.
It's like listening to two brain surgeons at work. You can recognize some of the words, but the rest is techno-jargon of the highest quality.
Having just spent a month splitting my tractor to replace the clutch and find the frigging broken seal that was running oil to the centre of the pressure plate. It is a joy to sit back and watch someone else pulling apart a lump of cast iron. Superb stream of conscious commentary, more laughs in 15 mins than I had in that month. Dewclaw should be a fixture.
“As long as you portray the proper false bravado, everything is going to work out just fine.” -AvE 2019
"Fuuuuuck...youuuuu"
....
" Yeah I missed a bolt" seems like every project at work
Shake Hands With Danger appeared in my suggestions nary a week ago so i watched it. Suuuper cheezy but a must-watch
He is a man after my own heart. Wildly entertaining.
Weird timing... Just this morning, I was just watching that 80's CAT safety video 'shake hands with danger'...loved the production quality, found it comical and informative. it's shocking to see how many people don't take the time to be situationally aware and nothing has changed in 40 years. Like you say in your videos, you always gotta be thinking about what could kill you next.
You have saved me so much money and time over the years, through multiple accounts. Thank you. Your knowledge is freaking endless
4:43 such an obscure reference. Good on you. Made me laff my arse off.
12:40 I'm telling you guys: This is a POETRY channel. AvE perhaps missed the boat on being the world's best freestyle rapper.
Popped up in my recommendations, subbed because i have not laughed so much in ages! Keep up the good work.
You got a lot of the funniest content on TH-cam to work your way through now 😁👍
cannot tell you how excited i got when ave used the same light all 16th wrench without the thumb detector i love these videos
I am a diesel mechanic, and I approve this video. Sounds like our shop....
What an emotional ride. This has to be the best christmas movie I have ever watched. Thank you Jesus.
Thats a mighty generator you got there... she’ll knock the pancakes right off your griddle i’ll tell you what. Hope she chooches strong and long.
It's a generac, so that's unlikely.
I seen the block at the start and instantly though "hhmmm that looks a hell of a lot like a mitsu engine." I hate when I'm right, so many mitsu's dying but I still love them. Can't wait to see the rebuild vidjahs AVE!
i wonder why those fire fighters used them expensive weight saving bearings on a stationary generator? those are usually only good for 6 figure trophy trucks
Love your videos. Clearly super intelligent with more experience then most in material chemistry and engineering. Considering myself a few of the enlightened I would like to advise that this newer video sounds more written than said. And said is the genius of your talent.
You best pull the whole crank out. There's going to be other issues, it's not just a single bearing.
Nar. Some emery tape, another shell from the usual scum bags. jam her back together and flog it off in an auction. Job done. Then off to the pub.
What's the Fun in that?
@@johnlemmey7698
That's the previous owners wasn't it?
The discolouring on the crank shaft joints says "All bearings are fucked". The one AvE showed was just the first to spontaneously disassemble.
@@Sai.Hottari Nope, induction hardened bearing surfaces, a hot spun bearing should have had similar colour on the rod end cap. Notice the next journal alongside has the same colour spread, but no damage. Dang clever these Japanese.
Most of the time in most of your videos I have absolutely no idea what you're talking about but I still watch em.
“We have found the never seize factory”. Love this dude.
I'm, not a machinist, mechanic or a nothing in any industry in topics shown in this channel. But the rhyme word replacement, subtle innuendo, and general "over doing it" cracks me up everytime. One of the very few TH-camrs I click like BEFORE I watch the video. I don't even know enough about what you are saying to know if it's not all complete bullshit!
Keep up the good work ;)
The knockers I love come in pairs and normally bounce up and down .
Agreed!
I hope i live long enough to watch at least one episode of zero g porn...
You have to have some good framing to hold them up, though. You don’t want them dragging the ground after a few years.
Did you try oiling them?
@@5roundsrapid263 When they start dragging, you trade them for a new set.
Always Informational and entertaining. Your content is breath of fresh air from the abundance of useless information supplied on the internet. Thanks for being on here!👍
"Shake hands with Danger". Now I'm hooked on 1980s safety videos! 👍👍😎
Spending many years in the diesel technician world I’m enjoying this series! I did Cats and Cummins mostly though. Since I worked on semis. But did a couple Mercedes and Mac over the years as well!
Merry Christmas to you and your family. Please keep the scientifically correct and politically incorrect videos coming at a rapid pace! Merry Christmas to Dewclaw and his family too!
Found your channel a couple days ago... Dude, I don't think there's a channel on the TH-cams with a higher laugh/minute ratio if Gentle Watcher can follow along with your Canuckistan mode of speech... Love the channel, Merry Christmas!
DVD directors commentary at it's finest.
This is better then most comedy shows I've seen. I love your channel so much.
Loved the shake hands with danger part😂 *guitar riff plays*
"Coveted like the last chicken tendy at Comic-Con"
-Bumblefuck 2019
Love the ol shaking hands with danger song mixed in,21 years ago in tech school tjey made us watch that old video,classic lol
Three finger Joe cracked me up and reminded me of seeing that video almost 40 years ago in freshman HS shop class. Great vid as usual.
Ave thanks for the year again of great knowledge and great laughs.... it's always fun to watch a fellow 200 lb gorilla beating on the knuckle buster.... Merry Christmas to you und you Familia.... and to all who watch this great man beat farstners into place....
You know what? I think someone about a half a decade ago took a shortcut. Just because it's that particular bearing. I think someone skipped a maintenance period and thought he could get away with it. It's the one bearing that lines up with the oil sump and would be a pain to replace. I'll bet he skipped it, and found another job the next week.
There are only 5000 10mm sockets and wrenches in the whole world. They keep selling you the ones that find their way back to their birthplace. It's a never ending cycle. The buggers are alive and they dont like being away from mom for too long.
That's why the ones you make don't leave, just break!
Gotta give the dialogue a big thumbs up! The occasional Dew Claw quip was exceptionally placed as well!
As a certified operator, I nearly cried for that poor poor forklift having to deal with that janky extension 😢
"certified operator" hahaha it did the job, no harm, no foul
Welcome to my world of a diesel mechanic. Many engines rebuilt and outside the frame is always nicer. Commentary is key LOL
Top Fuel style is sand the crank in the block, brake clean it, put a new bearing in and send it
Generator engines need to last more than a dozen seconds between rebuids though unlike top fuel engines.
@@dutchgray86 a genset needs to do more than a max of like 900 revolutions.
@@jdrok5026 I'd expect any of mine to do at least 500,000,000 revolutions before overhaul.
@@godfreypoon5148 than top fuel is not for you lol.
@@godfreypoon5148 it's like drugs man that cackle would be better than the hum and whine of the diesel and gas gens
This is the most entertaining and informative thing I have seen all week.
HEY! - I thought you were making all them words n stuff up. But, I read me the service sheets on how to do this, and wouldn't you know it, it's word for word what you said.
Yes I'm one of the guys who described to your Channel I enjoy song somewhat really doesn't do anything for me but I'm still happy to have your channel I'm wishing you and your family a very merry Christmas and the cheers with a beer I should say freaking beer
i used to do this diesel gahbage for a living... now i work on mazaks, okumas, etc and roll around in oil, coolant and metal chips... good times.
Tony Fleetwood how was the transition? I’m in the truck dealer world and want a change
@@DFBrews not bad, slight learning curve, but still turning wrenches... just have to learn the computer side of it.
I must say... as a mechanic... This is a really nice piece of equipment even with a spun bearing.
That wasnt a reasonable job for a good forklift, let alone your clap trap approximation.
Definitely could've done with an overhead crane on that one, hah
Your diction reminds a wee bit how jack Kerouac wrote, minus the complete drunkenness. This is a compliment of the highest regard. Its most entertaining and enlightening to listen, observe, laugh, and commiserate. I just dig it man. Many many thanks.
“Your arm holding it down ain’t doing F all” had me dying
Merry Christmas and thanks for taking the time to upload these videos, I hope too see you guys continue work on this engine. Just by watching this content you can learn so much.
Move aside Shakespeare, we have a new top wordsmith on the block
I’m finishing hooking up a generac generator for my house today. I have an electrician coming out to the farm today to complete the connection. It’s a bit smaller than that monster, only 32kw and LPG but it should run everything here just fine. Have to get ready for hurricane season. Good luck with the project.
We need an update on this beast
6 more months you'll have to wait.
Had a boss called Dewclaw. Guy had dwarf thumbs. Your apprentice Dewclaw is top notch bub
How weird
This is my everyday job
But I find myself drawn towards watching
Just wish my engines were as clean to work on
👍
I know right every time I have to touch an infernal combustion contraption it's so many layers thick in baked on shmoo you gotta blast it for ages to find the nuts.
EV running the generators will be nice and clean.
That was the best Christmas Eve story.... Wore my Spanx while watchin !!! Merry Christmas !
Shake hands with danger was narrated and sung by Harry Morgan from MASH
You’re right! I can totally hear it now.
@@5roundsrapid263 That made a good show even better...nice touch.
@Glenn Fonner:
That's not what IMDB says.
They credit Charles Oldfather with the narration and also a musical soundtrack credit.
Funny, but not true. It was a guy named Charles Oldfather. Jim Stringer wrote and played the music.
Holy shite, I haven’t heard the shaking hands with danger jingle since I was in tech college 16 years ago. Love your videos and dialogue!
"Ever wondered where your ten-mil goes? God darmn kaboutertjes?"
Secretly having some Dutch ancestry there I hear.
Shaking hands with danger. Almost shed a tear on account of the brain pixies what remember those VHS tapes way back in my Lincoln Technical Institute days. When I was young and still had sufficient cushion between my vertebrae.
doctor: Sir youve been in a coma for a year!
me: Aw man i cant wait to see how my favourite bar tending robot is coming along!
Best youtube content in a while. This one a goodie, merry christmas.
Ah, de kabouterjes have my 10mm ;-)
GODDAMN KABOUTERTJES!!!
@@DC_DC_DC_DC poemoekel ;-)
Leve de Kaboutertjes!
Kut kabouters! Waardeloos.
Fucking kaboutertjes 😂😂😂
Zijn nederlandse hints zijn geniaal 😂😂😂
Your voice overs are the best damn thing I've ever heard. Your really in this for yourself and the fans. THOUROGHLY enjoyed this whole faking video
I replaced a single rod bearing in a Mitsubishi 4g64 engine in a Mighty Max truck that had been knocking.. My little bro is still driving it still works fine. Send it!
wish he would have tried this, worst case ontario yer out $10 if it eats the new bearing
@@agentjwa No, if it eats a new bearing quick you were already out much more for a full engine rebuild including probably a crankshaft and at least 1 rod, but that's also the point you were basically at when it started knocking especially if you didn't tear it down IMMEDIATELY when noise stared. Anyway, I carefully polished that crank journal first with fine sandpaper/WD40/shoelaces to spin the paper, and the rod was still fine, and I did end up replacing all 4 rod bearings. 4G swap the world..
Did the same with my Volvo 850, 10k miles at 20psi later it's doing just fine.
I have rebuilt over 100 4G54 engines and have found them to be tough as nails. It's a 2.6 litre Australian made mitsubishi engine.
I have an adaptor to allow the 2.6 car block to be installed aith the 4x4 /diesel transmission due to split cylinder wall and cracked head and no 4x4 cores to be found.
If I can laugh and cry at the same time, this is a 15-minute time frame well spent.
4:47 found yer problem, it ain’t an American made soot thrower!
This man knows about the tendies...
Merry Christmas
13:45 Never saw discoloration on a crankshaft like that before...not that I rebuild engines. Looks like some new form of heat treating: selectively localized, intense, and unintentional.
Normal for diesel engine crankshaft
the journal are heat hardened
Buy a brand new one and it will look the same
This format was awesome. Keep up the good work.
That Fram filter is your problem right there partner 😂
they used it just to see if the engine would run it was already fuckered before
I saw FRAM on that filter, and I immediately went to comment the same thing you did - but I was twelve minutes too late lol
@@Vince-DM You realize he put that on AFTER the bangy bangy noise problem. No reason to buy a good filter just to fill it with glitter.
He put that on it in the last video. It still had the machining swarf in it!
@@5roundsrapid263 whoops, missed the last vijeo. My bad.
i can't believe how much good faith he's putting into actually communicating information to the audience in this vid instead of jibber jabbering and wasting our time with double entendres like an R rated Ned Flanders
Hey AvE are you gonna tell William S. Burroughs “Junkie’s Christmas” again this Christmas? You tell that damn good story damn good!!
I agree.
oh please its a tradition
Didn't do it last year
Yes please sir, I want some more.
Wow.. the amount of blueing on the connecting rod caps indicates thermonuclear heat!!
Bet all the rod ends are out of round by more than 1/10th..
Can't wait to see the crank journals.
Wait till you get a price on a new oil pump. That will end the rebuild budget in a hurry if it's beyond cleaning...
Happy New year 🎉!
Dirty Wintter Snow Knockers Greettings To The Master Of Many Talent From Finland & Merry Christmas AvE & Family
Ah that knockety-clickety. As a long time viewer, fan and car mechanerd, 't is nice to see you work on anything resembling what I come aboots here in the shop in the Dutchlands. Car engines are just daintier. Fiddely. With this kind of a big job, denk ik dat jij een grote bier verdient hebt ;) Enjoy!
Funny thing is I just watched that Caterpillar safety video the other day🤣
3 steps back, one step foward.. so true, Glad to see your PhD is coming in handy.. some day I would like to see a BOLTR on a Chonda small engine vs the real version.
The day after Christmas I'll be doing a inframe on a CAT 3406E in one of my semis it will be fun.
Woof. Those crank journals look like they have all been HOT! Must be the heat treating...