Antminer S9 setup at Home/Apartment

Try cloud mining : hashflare.io/r...
Join Coinbase ( get Free $10 BTC ) - www.coinbase.c...
*None of the information provided in the following video is a professional advise for a miner setup as well as investment*
How to Setup Antminer at Home/Apartment: -
Things you may need Before Setup:
Note: We used some of the following materials/Tools in the process of this setup. You are most welcome to use your own choice of items
1.Chest Cooler
2.Jigsaw
3.Cordless Drill and Drill bit
4.Duct Tape
5.Air Filter (we used a 14*20*1)
6.6 inch Insulated Flexible Duct 25 feet
7.Power Cord - BITMAIN APW3++ Power supply Power Cord 15Amps , 6ft/12ft Length wire
8.Digital Thermometer (To Measure temperatures inside and outside of the cooler)
9.Warm Humidifier
10.Air Filter Support Setup (We Used a Cardboard Box)
11.Thermocol (To place at the bottom of your cooler, to bring up the height to match the holes that you have made to the cooler. So, that the miner has a free inflow and outflow path and also absorb any shakes while miner is running)
12.Wood Panels (To place on top of the thermocol inside your cooler) - Get the wood panel cut into required dimension pieces at HomeDepot or any where you could get it done. We got 3 Pieces and stack them up in our cooler
13.Ethernet Cable (Make sure you have a good wire length just in case if you need it)
14.A Stool to place your BITMAIN power supply box on top of it
15.Extension Cord (Mostly, NOT needed but just in case keep it with you it can be handy when needed)
16.Knife/Cutter
17.Metal/Plastic Scale
18.Antminer S9 by BITMAIN
19.BITMAIN powersupply APW3++
Hope this video will help you and Have a Happy Mining

[@DavidFox22]

This is at risk of overheating. You're pulling air through 6 feet of ducting, plus a paper air filter with a CPU fan. When you open the cooler you can hear the miner fan running at a high speed to overcome the air resistance. You can even hear it shift down when it starts sucking air through the lid you just opened. You should add a 6" duct fan on the intake (inside the cooler) to help pull air through the duct/filter.

[@leelakanthinagisetty]

Hey I just not s9 it came with power supply can I hook it to wall port how to determine which is 20 amps ??

[@apo180]

You know that the bitmain powersupply APW3++ only delivers 1200W at 110Volts and your antminer S9 need 1350W to properly work

[@cryptogems9924]

Thanks for the heads up Daniel. Ya we have researched on this and we ordered 1350W power supply once we got the shipment we will setup the miner with the new 1350W power supply
-
Balu

[@apo180]

Crypto Gems I'm glad to be of help.

[@dennywells2835]

hello Daniel, i am looking to give away my Antminers, will you be needing any?

[@apo180]

Denny Wells what's the catch?

[@dennywells2835]

i am having problem using the Antminers due to electricity cost, and i don't want them to lay around and go bad, you can offer anything in exchange

[@giomyrie-smith8879]

What did you use the metal / plastic scale for?

[@hongk0ngfu3y]

why not use a wireless Ethernet bridge? the room temp will get hot in the summer and it will start to draw warm air in.