AntMiner S9 Setup Guide Part I by CryptoCrane
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Available now @ cryptocrane.com as well as on our Amazon store and our eBay store.
In this guide, I walk through the relatively simple physical setup required for the AntMiner S9 Bitcoin miner from Bitmain.
*Part II can be found here: • AntMiner S9 Setup Guid...
**Please note, there are fake sites that are masquerading as "CryptoCrane" and stealing people's money. Check out cryptocrane.com for an updated list of our official online sales channels.
Thanks for the video!
Metric units for the measurements etc are:
13.5 cm wide
15.7 cm tall
35 cm long
4.13 kg
This is such a well made video I don't understand how it doesn't have more views. As a beginner this video and the Part 2 are probably everything I could ask for to learn about how to set up my Antminer S9. Well done!
That goat almost killed me hahaha well made video!! Great info
Thank you for the video.
Please forgive me for asking a noob question.it mines bitcoins, I would like to know how you actually mined coins, transfer to your coinbase account or other accounts?Would that be explained in video part2?
Thanks
I noticed towards the end that you had a power strip near the fan of the S9. You should really not have anything near the fans or in front/back of he machines. It causes them to work harder with the pulling and ejecting of air. Just thought I would mention that.
6:01 you really know how to bind your viewers to the video dude.. great vid! ^_^
Awesome video. Thank you for posting. I’ve ordered 2 S9s about 10 days ago. I live in the US. How did you run 240v to a standard 3 prong 110v plug? Are you using something (transformer) to step up the voltage, or are use using a single phase 220v (like from a dryer plug) that runs 2 hot 110v wires and a neutral/ground?
very good question my firne di would also like to know this.
@CryptoCrane i’m curious on the bitmain power supply, could you list out the detail of the power supply and where to purchase them?
hey, i have a question, in one of your other videos you have a whole shelf of these running at once? How do you route all of the power cables to avoid electrical issues??
I have the APW3++ power supply and it works perfectly well on the 120 V supply. I don't know why you say it needs 240V. In the US you actually have 110 V which is maybe not enough, but in Canada it works on 120 V. I even have an extension (big gauge however) on it because the power outlet is not close enough.
Your big power supply is maybe less efficient simply because bigger and more sturdy has a cost of trading some efficiency.
Thank you mate. please make another review of this device. may be 1 month earning ? :D
GREAT VIDEO. Your humor and information are unsurpassed. Thanks!
Thank you for the vid. Quick question how many amps is your 240? Also what wires ratings are you using? I’m having a hard time getting the right set up for a 240. Any advice would be greatly appreciated.
Thank you!
Considering the ear piercing loudness of this machine, would I be ok putting it in a small (7 ft X 11 ft) room and closing the door? The room has air conditioning but it doesn't turn on often due to the size of the room compared to other rooms in the house. Would I risk overheating the miner or would it run ok?
What happens if I use the APW 3++ in 110v outlet? And do you leave the power suppply tester connected all the time?
Can you use the APW3++ of a 120V circuit like you did with the EVGA G2?
hello, in mauritius, the power supply is 220V, will it be risky or non-profitable for me to buy the antminer and power supply APW3++?
Boss, how much is the total cost for the entire system including the power cables etc? and would you please also tell us if its worth buying since you have started using it in September.
And there is one more thing, is it necessary to insert the wifi port? or could it directly catch the wifi signals for internet?
i hope someone will answer
I have access to a 220v socket and power is a flat rate in my apartment because it's in an industrial area and built into rent. Is it possible to just hookup 10 of these things out of one 220v jack and rock n roll or am I gonna be blowing fuses drawing too much power getting the power company banging my door in etc?
Instructions say to make sure heat sinks didn't come loose from shipping, is that not the rattling in your video?
🤭 so you connected one face to the small leg of a 5-15p outlet and the larger face to the other leg to create a 220v circuit? Is it because you couldn’t find a c13 to nema6-15p cord?
Thank you for adding a power meter. ☺
Does the unit come with detailed set up instructions? After researching online, it looks like some are having set up issues. Any advice is super appreciated!
Does it mean APW3++ uses less electricity? Do you prefer APW3++ or 1600W EVGA?
Hey, I have an issue with my AntMiner S9, and thought you might have an idea of what to do. I was able to get it up and running at one point. I even connected to it on the computer using its IP. However, the connection was poor and only lasted a few minutes. Since then I have not been able to connect to it at all. Today, my bitcoin miner will not even turn on when plugged in. What should I do?
i think this is the best and funniest tutorial
So which one at the end of the day is a better power source? the first or second device?
Would a 240 power supply cost less to operate?
Just asking. higher voltage equals lower current.
I'm using the new PSU which comes with AntMIner S9 so if I use it I can't connect a motherboard to it, is that fine to run it without motherboard?
how are you getting that 125 volt max watt meter to run on 240v ? can you please tell me where you got it or is that a 125v model and works with 240 also thanks
Can anyone tell me the measurement from the base to top of highest female rail/t-channel? Looks like around 4 1/4". If it's the same channeling as on the D3's, the female channel is 3mm wide.
I just want to make me some custom mounts for the psu's before my s9's arrive.
So the apw3++ was attached to a 110 volt and still getting 1400 watts?
just to make sure with bitmain psu you can't plug that on regular wall outlet?
Is it better to get a router just for the Antminer?
Is it possible to use this to mine other types of crypto-coins other than bitcoin?
What type of bridge are you using?
Did you mean 1600 watt on 110 and 1200 on 220 ? For the apw 3 ++
How can you set where the lines bitcoin goes at the end of the day?
can you list the items that you showed in your video, please?
At 9:07 how is you Kill A Watt meter plugged into that PDU? do you have some kind of receptacle adapter?
Bingo.
i have a question can we talk please somewhere i have a few question that woud be awesome if you have some time thanks
I find it funny that the fans actually push the machine a bit
s9 antiminer machine is on but not connected can any on help me plz
Do you have any idea how can l connect 2 antminer s9?
Does this work with the AntMiner s7?
Is the PSU the P2 or G2?
Do you have any deals on the l3+. I want to buy bulk from you
Hey mercelino,
Go to our website (www.cryptocrane.com) and click the 'Contact Us' button. We'll talk that way.
we have lot of video about s9 , l3+ , d3 , dr100
Do they come with the powersuppply
Hey Quinn,
Some of our miners do, some do not. Check out our Amazon store for a complete breakdown: www.amazon.com/s?me=A1LBZI6C51C6OJ
how do I link this miner to my bitcoin wallet ?
how much btc mine per day antminer s9
great video! clearly explained.
These two videos don't really come close to explaining how to set up the S9. How do you set up the software? Where do you plug in the monitor? Where does the OS come from? How do you set up your mining account? [500 other questions]
Hey Trey,
Great news: we're working on a series of 'Getting Started' videos at this very moment which will address almost of your questions. Still, here we go:
- Setting up the software isn't really a need; all miners come pre-installed with the programming they need to run...actually, fun fact--every time a miner starts up, the controller board and hashing boards are flashed, so it basically writes its own programming (via reflashing the firmware) from scratch every time it's powered on.
- You don't need to plug in a monitor, because you can only access the miner via its web interface. Go to your router's IP address (usually 192.168.1.1, but not always), find the IP address for your miner, then put that address in the URL bar and you'll be at the main page of the miner interface.
- Similar to your first question, the OS is built into every miner.
-As for setting up a mining account, here's the easiest breakdown: choose a bitcoin wallet-->get the receiving address from the wallet-->find and select a mining pool-->create an account on that pool-->configure your account to pay out to the receiving address to your wallet.
Hahaha presentation so on point and so informative at the same time. Thank you sir!
How much it mine in 1 day
I wondered if mining using antminer would need internet connection?
From where you buy it
Hi Tech,
I'm not sure what you're asking...are you wondering about how to purchase an Antminer from us? Or are you asking where we get our products from?
I like your reviews.
Where can I purchase a S9?
At the moment, we only sell on Amazon here: www.amazon.com/s/url=me%3DA1LBZI6C51C6OJ. You can also try purchasing directly from Bitmain if you have bitcoin cash.
that is a *thicc* power cable ;)
Hi, just subscribed to your TH-cam channel, will like more info about Antminer. Do you have a website/email?
We sure do: cryptocrane.com/
And if you need help post-order, just shoot over an email to support@cryptocrane.com.
sir profit per day
Thank you very much!
damn that uses a lot of watts?
thx for this! awesome vid. x)))
nice clean video bruh thx
Solar power it.
thanks alot man
Good video
great video :D
LET'S MAKE SOME BIT$$$ GUYS!!
Hahahah that thing almost flew :D :D :D
pls explain in hindi
hahaha funny man