Clutch pedal hard and squealing? Here is how to repair the squealing and to prevent hard pedal feel.
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Hello guys! Maintenance. The most valuable word on this channel! Maintenance has several directions, from lubrication, cleaning, care in use, timely replacement of fluids and liquids.
In this case, the pedals should be lubricated for an average of ten years, although it took twenty years to create a noise! Do not attempt to lubricate without disassembling as it will not last or will not work at all.
Regarding clutch pump fluid, its maintenance consists of changing the fluid within a maximum period of 2 years or 40 thousand Kms! To increase the service life of your components, a different type of maintenance is also considered, using exceptional quality parts.
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
PayPal link to help my channel:
www.paypal.me/...
Patreon link to help my channel:
/ alfaromeonoproblem
Unstable driving, causes and diagnosing:
• Unstable driving? Fwd,...
Original springs always available, how:
• Original quality sprin...
How to remove and replace master clutch cylinder on 155 and 156:
• How to replace Clutch ...
Ac Sytems, faults, solutions and tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspention:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my reaserch of parts: wwww.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfa156 #AlfaRomeoNoProblem
Congratulations for your videos. I am a big fan of your channel.
Watching this video, I have to tell you about my problem with a 159 jdt that I am fixing.
He decidido arreglar el problema que tiene el pedal de embrague porque se le rompen las sujecciones del muelle de retorno. Gran problema, para que hagas un video, porque el 99% de los coches comparten ese problema.
When I put the pedal back on, I can't even squeeze the clutch master cylinder rod in. It has broken? Should I purge the system until it comes in? Change the master cylinder?
Saludos desde España.
Hello. Thanks for watching! I want to do a video for that, how to replace the spring, the spring clips and how to assemble the pedal. Yes, it may seem it's broken in half, but it's not really. Cannot wait to get one to do a video.
For the correct bleeding of those systems, I have here a video that may help you.
th-cam.com/video/niwhRaX3Dms/w-d-xo.htmlsi=FS7r7fNmG7renBZe
Thank you
Hello. Thank you very much for watching
Nice job! Great videos u made about Alfa's..I follow
Thank you very much
Why my clutch is soft and i feel till the floor after repair the clutch,
My mechanic said is normal after repairing,
I don’t know if this is true, pls make some video about it,
Thanks so much and more power,
Hello. It's not normal, not at all. He has to do a pressure bleeding. I have a bunch of videos for that:
th-cam.com/play/PLgcTCigdgD8MSkcQhlXTdYW9iGEhZg8Wc.html
hello. nice video. i have this same sound on my 159 JTDm but all the time while driving not only when pressing and relasing clutch. what can be problem ? Mostly its noticable on bumpy roads
Hello. Normally it's the plastic clips on the return spring. Very annoying and hard to replace. So make sure where does the sound comes from
Is there any clutch slave or tube in paddle as aell? Fiat idea 1.4 active, i bleed the slave which is next to engine and master slave have oil enough, paddle is spryed well still my paddle stocks in the floor some time. What can be the problem my friend? I guess may be same like this video spring broblem or small baring and things need to clean or change
Try to do with this method:
th-cam.com/video/niwhRaX3Dms/w-d-xo.htmlsi=yZ2kG6fopEF9XWHR
Hi Bruno, I have a heavy clutch but I think it is the release arm bush. It's is so heavy sometimes it's impossible to use on 156 1.9JTD. I can only find bush for GTA. Do you know if it is the same part?
Check out on eperfiatforum for part numbers and possible matches.
Virtually no GTA exists here in Portugal
Hello, did you forget to install the spring or is this spring not necessary?
Hello. It is very much important. But I already did so many videos on the subject, I did not repeated the assembly on camera.
The clutch pedal on mine gets "stuck" in the middle apart from the squealing, could be the spring also?
Hello. Yes, it can. The spring helps to position the pedal. I have videos for that. Check on the clutch playlist
@@alfaromeonoproblem Thanks a lot! I think I also should change master and slave cluth cylinders because when I fully press the pedal the gearbox makes a bit of noise, and it's very hard to put the reverse
olá, quero fazer o mesmo trabalho no meu alfa, qual lata de spray você usou e qual graxa
Olá. Tenho o canal em português se for melhor para si.
Usei massa consistente sintética da wurgt. Mas pode por da marca que bem entender, tem é de ser sintética
I have noticed on my 159, when I sit in a car and press the clutch pedal (while engine is still off) it is a bit hard. But then I release it and press it again (engine still off), it is soft and remains soft. Is that normal, or?
Replace the clutch cylinders oil, the vibration of the clutch running is helping the fluid move. It should be the same
@@alfaromeonoproblem So the cluch cylinder oil is not the same oil used for braking system? I mean, not from the same reservoir?
@DashCamSerbia it is, but it's just stands there on the line
@@alfaromeonoproblem Ah, OK. I will have the brake fluid replaced, becasue when I was doing the rear brakes a fee days ago, I've noticed that the brake reservoir cap is cracked. Maybe I have cracked it, because I started to wind back the caliper piston, and I forgot to take the cap off. But when I took it off, on the inside of the cap there was a lot of moisture (water dropplets), so it was pribably cracked from before.
@@alfaromeonoproblem BTW, it took *a lot* of brake presses to get the pedal to be firm again, after doing the rear brake discs and pads. I mean, mostly while driving. Manual says "pump the pedal at least 10 times". Yeah, more like at least 50 times.
Eu vi que eras Português pelo sotaque 🙂🙂
Consrgues-me esclarecer uma situação? O meu carro é um Honda Accord, substitui a roda bi massa embraiagem nova, e até substitui os cilindros de embraiagem.. E o pedal continua Duro e descomfortavel, que poderá ser?
Um abraço, sucesso para o canal
Olá. Eu tenho o meu canal em português com exatamente o mesmo conteúdo.
youtube.com/@brunocrespo
Ora, carros japoneses gosto muito e trabalhei em muitos. E a regra é: do podes os material japonês. Qual a marca das peças colocadas?
Foi material da Luk e Aisin
Ps: o meu ex carro foi um Bravo 1.9 multijet 8v
Não podes misturar marcas... E o Luk é o pior que podes por. De longe o pior. Luk s só nos carros que o trazem de fábrica. BMW, alguns vw, etc.
Tem de ser aisin ou exedy, todo o material
@@alfaromeonoproblem
1a vez, ótimo vídeo;
Eu tenho 1 Monterey 3.1td 1995, de 2 que tenho,que há 8 anos levou embraiagem nova, pois numa redução muito violenta(NUNCA faça isso) empenou os 3 tirantezitos que,dentro da embraiagem,seguram o prato todo; claro que esses 3 têm de ser flexíveis,mas eu abusei e pimba...new clutch needed;
e meti a mais barata que encontrei, menos de metade do preço de algumas outras!!! e porquê?
é que comparando com a de origem((Exedy,or something?::) fui vendo, na casa das peças do meu amigo, que TODAS (Sachs,Aisin,Valeo etc...) eram feitas no MESMO local e pelas mesmas PRENSAS; (já fui,among other things, machinist em NY e NJ states , 20 years, e sei ver as marcas das prensagens no aço,dimensões etc);
concluí que só há UMA casa no mundo que as faz,ou fez, clutches para o Monterey; é que são ferramentas caríssimas,não compensa para as pequenas séries dos aftermarket, e eles apenas compram do original e mandam colocar o nome deles, e o PREÇO deles,consoante o nome é SONANTE ou n ão lol
e para as outras marcas de carros.. vale a pena examinar bem, para quem souber
No meu caso,a clutch tem sido MUITO boa mesmo; muito,mas muito macia (mole,suave no pé esquerdo) todavia faz monte e faz serras ótimo,redutoras, e reboca barcos desde o Porto ao Algarve por vezes,queima pneu se for preciso,resumindo,perfeita, e por menos de metade do preço de algumas...
Muito obrigado por partilhar a sua experiência. Infelizmente aqui para a Europa as coisas são um pouco diferentes. Temos mesmo de usar as marcas que vêm de fábrica. Seja Luk, Valeo, Sachs, aisin ou exedy. Aqui são todos diferentes. E em vinte anos já vi muitos problemas por por marcas que não são as indicadas.
Ola. eu tenho um problema no meu Fiat Punto Evo 2010 1,4 Multiair com embraiagem nova trocada a cerca de 2 meses e meio o problema é que quando eu piso na embraiagem para mudar as marchas faz um barulho e vibra quando que eu tiro o pé o barulho vai embora o que pode ser ??
Olá. Se o ajudar eu tenho o meu canal totalmente em português com o mesmo conteúdo..
Qual foi a marca de embreagem colocada?
@@alfaromeonoproblem para ser sincero nao sei foi o meu sogro que mudou
@andremorgado8103 tente saber então
@@alfaromeonoproblem acho que pode ser o cilindro mestre porque so acontece o barulho quando eu piso no pedal da embreagem
@andremorgado8103 não me parece
Please help my I have a big problem on mine 159. I started to remove the clutch pedal on my own because no one wanted to do that job. Mine problem was two brocken plastic holders of the big returning spring that return the pedal, there was clicking sound from the spring. So i bought two new , remove by myself return back everything, try it jently and it work. No more clicking sound. But at the end and when I sit to drive and press the pedal to the right end it stay down. Then i pull the pedal menually back up and i can press again. I thought that maybe I put the spring in wrong direction so I remove everything again but its imposible to put it in the other direction. So I install her again but the problem stayed. Now is really difficult to drive and dangerous. What did I do wrong, no one can tell me. Please help me
Ak nije pedala onda ili lamela,korpa i druk lager ili cilindar kvacila.Sutra idem kod mehanicara zbog istog problema pa cu biti pametniji kad mi veli kaj je
@@marioQ4 meni je radilo sve normalno samo je krckalo, nema veze ovo sa kvacilom direktno nit druk lagerom. Ovo je glupi problem kod same pedale. Mozda postoji mogucnost da se sjebao cilindar kvacila, ali onda bi se drugacije ponasao a ne ovako radi radi sve ok i samo odjednom kao da preskoci cela opruga i padne dole cela pedala sve dok je ne vratim gore i onda moze opet
Hello. Can you show me the symptoms? Send it to the email on the description
@@alfaromeonoproblem I just send you an email with video and details. Please answer if you can help. Thanks
Hello. I've seen the video. You can notice that the pedal is made from two parts, it is not fitted all the way, once you have the pedal on the upper position you should slide all the way the top part
Olaaaaa from brazil
Olá! Muito obrigado por estar aqui! Tenho o meu outro canal totalmente em português, caso prefira:
youtube.com/@brunocrespo
Espero que goste
@@alfaromeonoproblem Gosto dos dois, na verdade eu sempre preferi a lingua inglesa.
Muito bem, eu mesmo só vejo vídeos em inglês, mas aqui em Portugal e na Europa é normal. Muito obrigado por acompanhar