I have the rotora 6 front. 4 rear slotted two piece kit on my sti for far two years still as good as new even thro winter. ❤i got the wr blue color for my wr blue 2020 sti
this is awesome. I did the 18+ sti brake swap on my 2018 wrx and its the best mod I've done by far. I wonder if this massive 4 pot rears helps the front braking bias some. Brakes are such an under rated mod.
I noticed you changed the direction of the drilled rotors from this video. Is there a reason why? My shop is telling me that this is the correct way and most people installing it wrong? Could you help me out, which is the correct way?
6k! Not terrible tbh. If I ever pull the trigger it has to be AP racing or nothing else. I've been drooling over them since I had a license. That J hook rotor is just ridiculous.
Yellow would have definitely looked good as well, but would have been too out there with what I have going on with the car. The white just flows so well with everything else.
Breaks are looking good! For the wheels you have. I’m looking at going 265/35/19 I see yours are 18’s do you have any fitment issues? Also what offset do you have?
Hi there, do you have any idea what offset for that big brake that I can’t use negative for camber.I’m referring wheels not having negative camber. Just plug and play wheels in that rota brakes.. thank you in advance more power.
how much are the lug nuts supposed to be tighten for the STi’s, to be more specific (pounds) if i make any sense lol. Just can’t remember the name. i got aftermarket wheels, will be installing them later this week. So i wanna know in advance if there’s anything you suggest.
Never ran them on this car so hard to say, but I know the +40 offset on them does not work with the pre 2018 brembos without spacers. Most people would go with the +27.
All brake kits are different sizes. I don’t have experience with them so not sure how they will fit. It also depends on the wheel as well. Lots to consider and factor in.
quick question, with the bbk, do you think we have to go with stainless or can we stick to using rubber brake lines? I've been reading around about the pros and cons of each type and it seems like overall, the rubber will be better for daily usage but I'm trying to figure out if I would still be able to use rubber with a bbk?
Shoot. Just saw your car at R/T tuning last week and got so I sprinted for my 2021 wrx that I’ve had for 9 days now. Just about to install my fortune auto 500 gen 7 coilovers this week.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
LOOKS amazing man!
The excitement in your voice says it all!! Looks great!👍🏼👍🏼
This has been more perfect than your previous plan of powder coating the stock calipers to white. So jealous of your car 😍😍😍
This sti is next level my favourite channel hands down
Thank you!
They look so much better 😍. Been waiting for my order for couple of months now. I went with the red calipers with slotted rotors.
Good choice!
AWESOME!!!! We need a rolling shot now!!
I have the rotora 6 front. 4 rear slotted two piece kit on my sti for far two years still as good as new even thro winter. ❤i got the wr blue color for my wr blue 2020 sti
Car looks amazing! Love your build.
That looks really good! I wish my stock brakes in my 2019 STi comes with 4 pots in the rear.
Wooowww!!!! Bro that looks so 🔥🔥🔥! By far my top 3 fav Sti! I’m hype for you bro ! Can’t wait for some rollers w the new baddies
Damn that looks good. Congratulations on the 3rd
Looking good. Those rotors are sweet. Get some rest while u can.
this is awesome. I did the 18+ sti brake swap on my 2018 wrx and its the best mod I've done by far. I wonder if this massive 4 pot rears helps the front braking bias some. Brakes are such an under rated mod.
Definitely will. Plus the crazy light rotors and calipers will contribute to the overall improved feel.
jeez this looks absolutely awesome!
I noticed you changed the direction of the drilled rotors from this video. Is there a reason why? My shop is telling me that this is the correct way and most people installing it wrong? Could you help me out, which is the correct way?
Yes, the initial install they were facing the wrong way.
is it okay if my bbk didint give me that bracket that sits behind and cover the brake pads?
looks really nice will you switch the lug cap to black ?? either way fits the car really well
Awesome video. Please show a video on the track. I love to see the results.
6k! Not terrible tbh. If I ever pull the trigger it has to be AP racing or nothing else. I've been drooling over them since I had a license. That J hook rotor is just ridiculous.
Looks great🔥🔥🔥❤ good job with this brake setup.
White on Lapis is fire. Though yellow would still look good. I'm sure the performance will match the price lol
Yellow would have definitely looked good as well, but would have been too out there with what I have going on with the car. The white just flows so well with everything else.
Breaks are looking good! For the wheels you have. I’m looking at going 265/35/19 I see yours are 18’s do you have any fitment issues? Also what offset do you have?
No issues +35
such a clean car
Link for parts
it looks so sick man!!!!
Hi there, do you have any idea what offset for that big brake that I can’t use negative for camber.I’m referring wheels not having negative camber. Just plug and play wheels in that rota brakes.. thank you in advance more power.
Hi I was just wondering if these rotors would fit my 2017 wrx limited? Thanks
They won’t. This rotors are specially for this sized caliper.
when u upgrade to bbk, did u have to get new hubcentric rings or no?
No just used the same ones I’ve been running
Super clean. Do you think these are thin enough to clear some RPF1s with +38 offset?
Not sure. It would be close. Probably would need a small spacer still.
This gets me pumped to do my Focus RS brembo brake swap upgrade on my ST. Looks good brother! Did you ceramic coat them?
Yes I coated them off camera.
Kinda figured haha
how did you know that the bbk will clear your wheels?
Took a few measurements prior to purchasing.
Wait!!!! Am I seeing right, does the back uses both break shore and disc pads?
The shoe is for the e brake. Most cars are setup like this.
@@mbnwrx8145 wow. Never know, respect mi general.
how much are the lug nuts supposed to be tighten for the STi’s, to be more specific (pounds) if i make any sense lol. Just can’t remember the name.
i got aftermarket wheels, will be installing them later this week. So i wanna know in advance if there’s anything you suggest.
88ftlbs I do 90.
Also is there any advantage from getting this kit versus a 2018+ sti brake kit?
Bigger rotors both front and rear. Much lighter calipers and rotors. Larger calipers in the rear. Better cooling capabilities.
Hey man, great brakes. I have a 17 and the dust is brutal. What can I do to have less dust? Planning for the future.
You’ll want a ceramic pad. Barely any dusting.
@@Autofreakgarage Excellent! Ty. Any vendor you prefer?
Kns brakes
Hey do you think i can run NT03’s 18x9.5 +40mm on these? Or if i need spacers , many many mm would u recommend. Thank you!
Never ran them on this car so hard to say, but I know the +40 offset on them does not work with the pre 2018 brembos without spacers. Most people would go with the +27.
will i have fitment issues with my ksport bbk? 18x9.5 35 offset
8 pot front 13inch rotors.
All brake kits are different sizes. I don’t have experience with them so not sure how they will fit. It also depends on the wheel as well. Lots to consider and factor in.
Hey nice video my friend! I'm thinking of buying a Rotora 4/2 piston brake kit for my Wrx, do you know if a 18x9.5 +22 will clear the calipers?
Depends on the wheel, but it should fit
@@Autofreakgarage I plan to buy some ESR CS08, do you think these will fit?
quick question, with the bbk, do you think we have to go with stainless or can we stick to using rubber brake lines? I've been reading around about the pros and cons of each type and it seems like overall, the rubber will be better for daily usage but I'm trying to figure out if I would still be able to use rubber with a bbk?
Yes you can still use the factory lines. These came with the stainless so I used them.
Love it! But like sure it’s a bigger rotor but that contact patch is a lot slimmer tho...
Same exact size as the 18+ brakes. The caliper is skinnier and not as wide. When comparing brake pads it’s much larger and has a ton more bite area.
@@Autofreakgarage ahhh okay gotcha. Thanks for the replies! Love the car:)
Nice ! Good job 👍🏼
did u end it up selling these calipers
Sold with the car
With the kit does the E brake still work ??
Yes. The ebrake is untouched and functions just as it did stock.
I wonder if the oem 4 pots would fit in the rear?🤔
They wouldn’t. You would need custom brackets for the bolts to fit properly.
Thanks 🙏
Damn looks so good😍😍
Very beautiful
Would you happen to be selling your stock STi ones?
I already already sold them
Shoot. Just saw your car at R/T tuning last week and got so I sprinted for my 2021 wrx that I’ve had for 9 days now. Just about to install my fortune auto 500 gen 7 coilovers this week.
WOW!!!!!!!!👍🏻👍🏻
You should ceramic coat them
I already did off camera.
Awesome
Would you mind donating your Sti brakes to a new wrx owner
FRESH!!!!!!
Jesus 6k lol thats steep. But worth it.. they do look amazing.
Niiiiicccceeee!!! 😍
Oh wow สุดยอดอ้ะ