(old video) Cold Start! 6Hp Sandow Hit and Miss Engine #2
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- She runs like a top!
there is a newer video of this same engine on my channel now
here • Another Cold Start! 6H...
forgot to upload it last week so ill upload it this week. last cold start before winter ended. this is the second year I've filmed starting it. better camera and better editing to make a more enjoyable video. with a few twists in the whole thing. Hope you enjoy!
the engine is a 6HP sandow hit and miss engine. - ยานยนต์และพาหนะ
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 3 | 6 ต.ค. 67](http://i.ytimg.com/vi/fTfIMFVjt_8/mqdefault.jpg)
Very good video and sound ! Byg like Man 👍 Nice engine !
Better than a parade😇. Great camera coverage.
Нихт ферштейн.
@@ansonstelmak9783 nn666tn6
Back in 56 there was an old man at the end of my road who wasn't on the grid, was still using kerosene lamps when I first met him and a dry cell battery powered radio in the living room. Outside in a shed was an old hit or miss engine hooked up to an open frame D.C. Generator. I asked why he didn't use it and his reply was my pappy would keep my bottom warm if I touched it so I don't touch it. I asked where his dad was and he looked a long time and finally said he passed away four years ago. So the responsibility for the engine falls to you then. After near ten minutes he asked ever run a hit or miss engine? Nope. Come on I'll teach ya how to care and run her.
Took us near 4 hours until he looked at it for the thousandth time and and quietly said " you dummy" .
I thought he was talking to me until he said no, that was me talking to myself. The magneto had a lever that flipped up and I was told it was a long ago repair his dad did to get her going again and when he pointed it out we had been trying to start her without the magneto firing once! He dropped the lever into position and several turns of the flywheel and off she went with a loud bang and a lot of smoke. It settled down after a bit then he threw the flat belt over the pulley for the generator and up came the light bulb in the shed! There were 2 old 6 volt car batteries off to one side and he said they charged up and ran the lights at night, i from hanging around a local Gulf station knew how to remove the caps to check the acid level and they were low so I added water from the well to bring them up to the ring in each cell and after he turned on the generator the old meters read 8 volts and showed a charging rate of 12 amps. The engine settled down to a nice bang, bang, bang on every other revolution and then his wife showed up at the door and said " the lights on in the kitchen! ".
An hour later over a slice of chocolate cake and a glass of milk his wife said they hadn't had electricity since his dad died as he refused to touch it then asked what did you say to get him to start it? When I told her she laughed and said if I knew it was that easy I'd have said it 4 years ago.
I'd visit every day in the summer to oil and grease her up before he started her. He lost his wife in 58 and he finally passed in 86.
Every time I visited from that first day I learned something about farming animal husbandry how to store ice so it lasted till the following winter. Everybody in town ignored him saying he was just an old crackpot because they stuck to the old ways and when electricity was run down their road in 47 they refused the offer to hook up when they found out how much money it would be a month. They were quoted $3.00 a month and his dad refused saying that will buy a lot of kerosene to run my generator for 5 months. Kerosene was in 56 7 cents a gallon and was delivered by a tanker truck to the 2 55 gallon barrels they stored it in. The hit or miss engine used roughly one gallon of fuel every 2 days. He only ran the engine 4 hours a day to charge the batteries. What surprised me was the date on the batteries, AC Delco October 1938.
He finally bought a new set of batteries in the summer of 57.
I haven't thought of that old couple in years, funny how an old hit or miss engine brings back the memories.
Cheers!
Cool story.
That’s a beauty story! Thanks! 🍺
Thank you for sharing that with us!!! God bless ya man. Every young feller should have an old man in his life who teaches him things.
Thanks for this 🤗🌲🌲
Cheers
Olympia WA
That was a fantastic read!
Hit and miss engines have to be the best sounding engines ever, they all have their unique song that they play and this ones a beauty!
I love all the comments from folks who know nothing about these engines telling you what you do 😎
Northern Michigan ATV/UTV/MC/SNO how do you know thay know nothing!!
We can all learn from others.
Strange......people just assume that other people know nothing. And think that this is a fact!
Eeer......how do THEY know that!
Well, lets not be completely negative, and declare all of the uneducated comments false.
Truthfully speaking, they seem to be hit or miss.
Not being a dentist, i still know more about dentistry than about starting this machine. Having said that, i'd be tempted to figure out where all the controls and levers, etcetra need to be at to get her to start and run, and then put in just enough fuel to run until i wanted her to stop. Run it out of fuel and next time just add enough fuel and crank'er over till she starts and runs with out all the readjustments and fiddle-faddling about ...
When I was in my early 20s I lived in a tiny dying town called Roxbury KS. There were oil wells all around the town. And at night we could hear the hit and miss engines on the pumpjacks. I would drive out and watch them for hours. I love it. And GOD bless you brother!
I grew up in SE Oklahoma, the engines on the oil wells ran continuously 24-7. It was a sound I was born to.
Damn, all along, I thought that was a girl...
Okay indeed! no commentary needed, the engine took care of that. Great video, engine oozes it history, and the operator sure knows how to coax her along. Fantastic....
Love it....best part is the barn cats wandering around completely unbothered by the noise or activity!
The health and safety people would have a field day with this nowadays.....
What a fantastic old engine, full of character.....
I need to dig mine out and get her going. Such a soothing experience to be around old critters
I would put that engine in my bedroom and sleep like a baby to that sound.
Young lady knows her way around the old machine. Good job
What a neat old engine. Thanks for sharing.
wow, that calls old is gold. thanks for your video
Outstanding job keeping this old engine running!
In cold weather we always heated some water and poured it in the hopper, seems to warm the cylinder up making starting easier, well at least it worked for me. Love your engine, your very fortunate to own a beauty like that! Thanks for sharing!
you would want to be carefull doing that because to hot of water on cold iron makes it crack and break otherwise yeah it helps alot when done right
@@cruddycornstalks yes, warm, not hot, you are right about cracking, there ain't a worst sound then cast iron cracking on something you love! Lol!
Great video!!!!!
You show a lot of knowledge about the old engine for such a young man . Hope we have more young men that understand mechanical things as you do. Thanks for the video.
ahhh . that's beautiful as is .
i could fall asleep listening to a hit n miss run because it's music to my ears .
Ohhh that beautiful old engine hit & miss sound great work engine that never die can go over 1,000 years or more.... Good ol' live old engine that beauty... well done keep look after the engine forever on ur next generation well look after good old engine... Good luck enjoy love old engine
Fantastic video like to see people trying to keep these hit and miss engines alive
Nice perseverance. Maybe next time fill the grease cups on the mains, then put some oil in the cylinder oiler too! You know your way around old stuff, like it wasn't delatching. Neat motor, I have a Stover hit of miss rig with a big beautiful Webster on it, all black and gold.
That engine's rhythm is mesmerizing!
Oddly satisfying to listen to and see this engine in action. Great video!
nice to see a woman that knows how to run an old hit or miss
Excellent video, thank you for putting it up. I appreciate the rawness of just the mechanical sounds.
I uesd to use one of those when I was a kid to put rice coal in a silo that belonged to Wally Korts. It started a lot easer than that I was onlly 14-15 years old and was hauling coal from Keyser ave by Scranton Pa . I was driving LJ Mack with 16 foot dump trailer. Didn't get a license till I was 16. Those were the days. God Bless America
Same
Learned a fair amount in watching you set it up.
👍👍👍👍👍 enjoyed it fixing to buy my first one of these
Am I crazy? I want to own one of these things just for the purpose of firing it up in the morning and listening to it while I enjoy my coffee. I can't explain it to y'all just the puttering of an old babbit-pounder is music to my ears.
Great job.I like watching the starting and the brains of my outfit (my wife) loves your cats!
Easier than getting me going in the morning. Easy to see how it got its name.
Better than any music on the radio
Old flywheelers are so cool!
Nice video!! Thanks for sharing.... A.E.V. 😊
Love to find an old gas pump like the one you have sitting they are rare around here
Pretty cool video! I love these old engines, subscribed. Thanks! 🍺 cheers from Maple Ridge BC
Listen to that all day
the sound is so pleasing
Really enjoy this style of engine sounds so much better than the ones now
I like the cats in the background, just doing their cat stuff. the one that gets up at 4:29 has no tail D:
It's probably some sort of bobtail.
I could watch one of these run all day long.
I love your hit and miss engine!
Thank you!
I just love old hit and miss engines, but they run and sound much better with a little load on them.
They are pretty uncommon here, as the hotbulb diesels was more popular here (and I love those too)
I would love to have one in the yard to start up once in a while, maybe power a saw and a woodchopper just for fun.
It's alive! Breathing!
Absolutely fascinating ! Wish I had one of these. That tiddly-donk-tick-tick is very hypnotic. Enyoyable, relaxing video, thanks.
Well done you persevere brill sound thank you.
I used to lean like that over rotating things too, until a friend of mine sent me a clip of a russian man literally getting ripped to pieces by a lathe.
Awesome engine though.
Another spring on that flyweight would help it run better at idle.
Their sound is amazing. 😍😍
wow without music, sounds like ASMR.
now if only i had the money to get a good stereo recorder to make it even better.
Love those auld engines!
Looks like something Roy Comstock would come up with and have the stuff on hand to make it.
Finally got myself a Sandow 1 3/4 hp one.
sandow medium blue color.
I would love to restore that engine. Nice and shiny like new.
Nice video and do not worry you do know what you are doing.
Came for the hit and miss and stayed for the cat.
@ 2:22 I see your "supervisor" arrived to keep an eye on you, he has the best fur coat.
Enjoyed the video. I have a few 1.5HP Hit and Miss Engines but only one 6hp, it's a John Deere early 20's
A delightful video, thank you for sharing it with us! You’ve got a new subscriber!!
Osha approved arm ripper offer. If the governor wasn't having an issue it would have kept going on the first pull.
OSHA = Pu$$y C.U.N.T.S.
Cheers
Olympia WA
I liked the cats,
Lovely engine and a very interesting video - thanks!
There appears to be a spring missing between the two governor weights. I can see a pair of unused eyes for one. With just one spring it's unlatching the push rod at too low a speed - there's no way it would run with any load.
If you're a bank robber, don't use this in your getaway car. :)
My ex girlfriends dad owns a woodmill and he challenged me to start the old hit and miss oh boy it was one hell of a serious challenge then he told me it had not been started for over 5 years since upgrading to diesel with a electric starter. It only powered a water pump for log transport it blew my mind
More of a ' Hit and Miss and miss and miss and miss and miss and miss and miss and miss engine!'
Больше всего мне понравились ваши 🐈!!!
The exhaust note at 12:25 sounds like me, filing my toenails.
Very good video!!!!! Nice engine!!!!!
Fuel bowls have been around for over a century now and we have yet to invent a gasket that works reliably on them.
it would hold up better if it wasnt taken off to make sure water didnt sit in it all year. otherwise cork works well.
cruddycornstalks I have a ‘85 Evinrude 2hp that had a cork float. I was going to restore it but, was told they were dipped in lacquer and the ethanol will eat it up and it won’t work so I replaced it with a new float. Still kept the cork because it’s cool! Now, THIS thing you have is really cool! Such a hypnotic sound.
@@TylerLL2112 epoxy coat cork. works good.
What a beauty. Probably never been apart- which does show in it's behaviour! 5 year gty expired unfortunately...
its been 100% apart when we bought it. i think it was mildly stuck when my dad got it. i need to machine a few parts to reduce noise on it in the following years though.
It seems those old one lungers will run on just about anything, except modern fuel with ethanol. When I was a kid I worked for a used farm equipment guy. We'd get one of those engines every 2-3 months. They were a lot of fun to see if they would run. I wish I had kept some of them.
you actually couldn't be more wrong with ethanol. this engine will run it better than most any engine out there. We run E10 and E15 in everything we own since it was realesed without any side effects. E85 is sometimes used in flywheel engine because you can tune them on the fly to run best with it. and if you leave E85 in a tank it just evaporates and won't have anything left to go stale. E85 is great if the engine does have rotten gas in it because it will eat rotten gas and help clean tanks and carbs. back in the 1910s and 20s they had low octane gas and sometimes distillates so there's no reason they can't run alcohol now the way they did when they needed to then. there.
@@cruddycornstalks OK, color me wrong. I was going off of the problem he was having starting the engine and the problems I've had with my small engines getting crudded up from the ethanol if not run regularly. Just wondering if you have a dog in this quail hunt, with a name like cruddycornstalks, do you grow/sell corn to make ethanol?
@@robobloxgamer524 alot of what small engines have problems with isnt just the ethanol its the ethanol being badly tended to. either getting water or sitting exposed to air to long. if its in a well sealed water free system it works quite well without any problems. most people just are not the bright or know well enough to do so.
Really nice engine
ASMR
Ow man if i only had the space, i would be a collector for sure.
:))
A quarry down on the river would pump overnight . Can't imagine anything else it would do . Guess a light load is all it needs now . T/C/E
NICE OLD ENGINE, NOW MAKE IT RUN
I just subscribed to your channel and hello from New Hampshire.
Thanks for subscribing!. hope I entertain!
Nice engine!
So I'm guessing the governor was stuck or that spring wasn't attached? Or maybe the springs are weak? (Or maybe there's only one spring when there should be two?)
Cold weather, cold iron = cold hands
Couple of tweaks and a new spring and away she goes
Nice cats you have
Seems like it would be fairly easy to get that gasoline tank cleaned and lined.
Grand invent de força gera energia forte tem muita força d uma Union pacific e fundamental.
9:14 Bye! lol That made my day. Would a tighter spring hslp it idle a little better?
wow!!!!
Is that it? I saear its supposed to go faster, by the end of the video it had such a weak going. Are you sure thats its normal rate and are you sure thats its normal rate of combustion?
What is this old engine used for?
A lot of work but well worth it...
They big end bearing looks DRY.
That beautiful old engine needs some love, & restoring.. properly.
it gets love, restoring doesn't gain it anything. none of the bearings were dry. they start to squeak and slow the engine down when there dry. She is happy and look the same as she has since we got her
Awesome! BTW, How many cats do you have out there? LOL!
alot!
That gas leak my just be do to a cold stiff o ring.
Делали ж когда-то такие моторы-открытый коленвал,открытый шатун,ещё и клапана с пружинами и толкателями открытые.Подул ветер,надул песка,хана мотору.Чем думали,жопой,что ли?
this old machine needs to be in a building where it can be saved other wise it will be scrap iron
this machine has been sitting outside since probably the 1930s and it hasn't cared since I don't think it's going to care about another 10 years.
love the cats pooping in the background! hahahaha
i don't think they do their business unless a human is around
Not sure what happened here in Europe, I dont see any of those around. Maybe we had less iron afforded to let alone to rust. I´d like to have one. Closest I find is 2 stroke semi diesels. These seem to make sense for pumps, generators and such. Could be a nice project to build one, maybe throw in a boxer config... Do you have a recommendable source of hit & miss mechanical principles and model documentations, workshop manuals etc ?
👍👍👍👍👍👍👍👍
Your supposed to do all the tinkering before hand"
Nice Little funny engine need to be painted
Hate to get in a fight with the “hit N Miss” girl
Wy not clean the gas tank?
Black cat @ 5:05 has no tail! Guessing it's on life 6 - 7 by now?
manx gene born that way!