2009 Silverado No Crank Theft Light ON. Basic diagnostic strategies lead the way for me to fix.

Here is a simple one. Hey we all need them sometimes! Follow along as i show you step by step what I did to diagnose to lead to a fix!
Check out courses.handso...
for more instruction and diagnostic direction!

[@mattsnowy4654]

Hey brother! I just want to say thank you! This video is what fixed my 09 silverado. I did a motor swap on my lc9 and couldn't get it going for 4 weeks . Trouble shooting ext . From a cut harness going from my engine to my fuse block. Power distribution block. Refined all the pins . This was my last hurtle. And you nailed it! Thanks again. Your video was bang on

[@spelunkerd]

There's nothing better than getting the chance to follow along as you go through the thought process.

[@BrianMann216]

Thanks for watching

[@Habeshavision]

Thank you I was just about to give up when I found your video. I Changed the fuse and was good as new

[@BrianMann216]

Glad it helped

[@glennallen7129]

Thanks for bringing us along Brian.

[@tylivinlife2238]

Man thanks so much, best video i found i watched so many literally had my starter out checked all grounds wires, had fuse box out cleaned everything. For it to be a 2 amp fuse. Still wondering what made it blow. Guess ill throw some fuses in truck see if it happens again.

[@rrmech11]

Excellent job Brian
👍👍

[@MyAngleFishing]

ABSOLUTE LIFE SAVER!!!!!! THANK YOU SOOO MUCH✌✌🎣

[@ozcar611]

roooock! i was looking so many videos, this is asome, thanks so much, u the best!!!! new suscriptor

[@philh9238]

Just replaced one of them fuse boxes for no wipers last week

[@arthurfricchione8119]

Thanks for sharing Brian. Do we have our meeting tomorrow night? Very inclusive diagnostic strategy video in the class section. 👍

[@BrianMann216]

Yes we are meeting on Thursday at 9pm ,I have a project to play with , been super busy!!

[@arthurfricchione8119]

@@BrianMann216 sounds good. I’ve been playing around with your electricity class. Just experimenting with different setups and seeing the results with voltage drop. Interesting and fun 👍

[@SuperBeetle1600]

Awesome job. That fusebox looks nasty!

[@jgeorges3061]

Brian, thanks for sharing ur knowledge what an AWESOME VIDEO/INFORMATION really appreciate the time you took to show all this thankyou.

[@jeffarmer4428]

Have a question hoping you can answer, seams no one else has an answer for this, what is a discrete input? In the case of GM 2000 Buick Park Ave. VSS - vehicle speed sensor - A vehicle speed sensor (VSS) connected to the Powertrain Control Module (PCM) via discrete inputs provides a signal source to the IPC. The VSS discrete signal is pulled up to ignition 1 (IGN 1) in the IPC. The IPC uses the VSS data received from the PCM and a software program to determine the proper speedometer gauge pointer position. Some other people think this is some GM secret and they won't tell how it works what it is. Looking at a wiring diagram for the speedometer, shows a single DK/green with white trace wire from the PCM to IPC for speed info. Not sent out on the class2 data buss? Thank you before hand .

[@abcdefgh9138]

Good stuff, Brian. 😎When is the next Premium meeting?

[@BrianMann216]

Thursday 9pm Eastern

[@stevemazzarella7212]

What do u think blew that fuse? Shorted wire module?

[@BrianMann216]

Not Sure , I usually encounter human induced errors with the help of a power probe or similar device.

[@stevemazzarella7212]

@@BrianMann216 Thank you love your channel…

[@rowlandharmon4485]

Took me a week to the day to find this video. I thought I checked everything. A seemingly insignificant 2amp fuse. Fired right up

[@BrianMann216]

Glad it helped! Please consider subscribing and hitting the 🔔

[@tylivinlife2238]

What fuse

[@philh9238]

That topology kinda sucks because it’s not labeled right. It says body power train should be labeled as can or low speed lan just my thoughts. I have same scanner it’s right on fords and Chrysler’s.

[@christopherwatson283]

Nasty!