Lexus IS250 [P2757] Engine Code Fix [Life of Jonny]
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Today we are replacing the pressure control Solenoid for a Lexus IS250 experiencing the P2757 Engine fault code regarding that faulty Oil Pressure Control Solenoid.
Also Buy stuff on Amazon: amzn.to/2KNazSI
---------------------------------------------------------------------------------------------------------
As always, if you enjoyed this video and found it in any way helpful, please hit that LIKE button. If you know anyone else who may benefit from this video, because their doing a similar project, then don't forget to SHARE this video everywhere. And if you haven't already, SUBSCRIBE.
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
For updates on new projects Follow me on INSTAGRAM
@INITIALIZED_FRS
--------------------------------------------------------------------------------------------------------
Music:
ChillHop Music:
/ chillhop. .
NCS:
/ nocopyrightsounds
Artists:
GYVUS
Bonus Points
Jeff Kaale
Kontinuum
![ง้อ (ALRIGHT) - FOURTH [ TEASER ]](http://i.ytimg.com/vi/ya6MBfo-Wvg/mqdefault.jpg)
Thanks for the video!
I changed the solenoid two days ago just like you said, the code disappeared and no more weird hesitation on the first gear.
nice!
Zogal Z what did you do next?
So here is what happened after changing the solenoid. The car worked fine with no code for three days, then the code showed up again and the car started to do weird stuff again but way less than before. I took the car to Al’s transmission and checked it and the transmission is back to 100%. It appeared that what I am having now is throttle body issues.
So I think the solenoid problem is fixed.
I will update you more next week.
@@zogalz5598 any updates? I have an 06 Lexus IS 250 I changed the solenoid but the light came back on and it’s the same code? Would a flush fix it or would I have to do anything else?
@@JonnyBarajas Excuse me. What is the normal price of this problem here in united states
Damn you make it look easy. Well done. I got p2714 and need to switch out SLT and SLU solenoid. This really helps. Well done
all good?
@@IcedOutGhost No. So I replaced the SLU and SLT solenoids. It does drive better but I have different codes popping up every 30 + miles ( I erase them but new ones pop up every 30 or so miles). Mainly the code has been p2757 but last night it was p2714 and p0751 and there was no p2757.
So I talked to my neighbors mechanic and he thinks the tranmission cpu module needs to be replaced. If that doesn’t work - the tranmission needs to be replaced. $550 for the tranmission cpu module. So I am just going to do it.
Thoughts!? Good deal? Should I just replace the transmission? $550 investment in vain?
@@MatthewCashew3 how did it end? what were the gearbox symptoms?
@@MatthewCashew3 how did it go?
@@erickvilla844 didn’t work took it to a pro he said a bushing was clogged idk he had a heavy accent
Hello Jonny, I have a question about the same problem with my Toyota Corolla 2013. When I putted the scanner on this is all it said: "P2757 Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance/Stuck off" Will it be the same solenoid as the one on this video???
Did you ever find out if it was ?
FYI... before changing the SLT or Line Pressure Control Solenoid, check the SLU or LockUp Control (TCC) Solenoid. I changed the SLT Solenoid as recommend in the video, but the Check Engine light and P2757 code came back on. After some more research, I decided to change the SLU Solenoid as well and... the Check Engine light and P2757 code are GONE! I've driven my car over 100 miles already. After changing the SLT Solenoid the Check Engine light and P2757 code came back on at about 10-15 miles. I forgot to mention, but the VSC warning is gone as well!
Can i have part number ?
I had the same problem
You gave me hope!
@@edsonhernandez5109 i had to change both! Just do both while you are in there.
@@RedXLilAznBoi SLT (Line Pressure Control) Solenoid P/N: 3529034010. SLU (LockUp Control/TCC) Solenoid P/N: 3528030050 Price: $230.72 ea. (US)
I am sure a lot of us want to see some confirmation to tell P2757 pointing to 35290-34010. Any TSB from Lexus or Toyota?
I sure would like to get confirmation too,considering that is a line pressure solenoid.and the code is for torque converter clutch.
I finally understand your comment. I was so confused.
Hola 🙋🏻♂️ tengo un problema igual desde hace un año y con tu video no tengo la menor duda qué hay que cambiar ese selenoide y lo malo que yo hacia agregaba mucho aceite en cada cambio 3qt cuando solo son 2 que tonto soy 🤦🏻♂️ y gracias por compartir esto para todos los amantes de este tipo de coches 😎
Que vehículo tienes? En marca y como solucionarlo?
Replace 34010 last week same CEL and VSC light came back on and decided to replace 30050 this week CEL and VSC light went away finally. But then end up with trying to slowly drive forward up my little incline driveway and the drive gear won't lock up on an incline.
How did you know exactly which solenoid was going bad?
what's the difference with this part no. 35290-34010 Line Pressure Control Solenoid Assembly in your video vs 35280-30050 Lock Up Control Solenoid Assembly i saw in another video?
Great video. Will be doing a similar job to my gs300 this weekend!
Very helpful video but i have to say you made a big mistake by only adding 2 qts, the 2 qt is only for changing the fluid without the filter, the filter drops at least another qt so you would have needed 3 - 4 qts. Hope everything is still running great tho and it wasnt a big problem
That’s right! I got the Lexus service manual and followed the instructions. My car took about 5qts and I also replaced the strainer.
Hey Jonny did u also have any other codes turned on because of the p2757?
This is what an instructional video should be like ohh God ❤ some people shouldn’t make videos bro but this one beginning to end if I could rate 10 stars ❤ maybe you tube should do that so people can save time looking through 100 vids great job buddy
I would NOT recommend adding the gasket making material to the rubber gasket. The rubber gasket is likely fine, and will last years without leaking. I have had to repeat this job multiple times over 4-6 years, and I don't even bother replacing the rubber gasket and filter each time. It has not leaked yet.
I think I have the same issue. Check engine, vsc light comes on then goes away after a couple days.
Did this fix the issue ? Can you give us an update ? I am currently having the same issue
Any update you can offer us on this ??
I just pulled my solenoid out. It is tested at 5.6 ohm and when 12V is applied, the plunge moved. That tells me it is a good solenoid.... Maybe filter clogged up and fluid dirty, hence pressure is low? I will put everything back with new filter and 2 qt of fluid and see if the problem comes back.
What's the update? Any problems?
What is the update????
Update?
Update?
Update?
Thanks for the video! What type of scan tool did you use to know which solenoid to replace?
Muy buenas es un buen video amigo tengo una toyota tundra 2010 motor 4.6 no es 4x4 es normal y me an salido todos estos codigos porque no se por donde empezar a reparar y estos son : p0020 , p0419 , p2440 , p2757 , p2714 cree que me ayudaría a como repararlo
Watched this video change solenoids car runs like a champ great video thanks
Did all that and didn't even show when he slid out the old solenoid and replaced the new one 🤦🏻♂️
there is a proper sequence for filling the transmission ,, you take the allen key plug out the pan and fill untill it runs out. Also needs to be a specific temperature 49 deg I think .. YOU JUST GUESSED AT IT.
This video was a lifesaver. Thank you!
how does he know it’s that specific solenoid?
Thank you, will 35290-34010 part that you showed on video fit all Toyotas, in my case corolla 2013? Or is that just for Lexus. I am finding it hard to find the part for my corolla. I have P2757 code too. Thanks
Although there's a code P2757 on my 2006 IS350, the transmission works well. In this case, the issue could be ignored, I guess?
Had the same problem on my 2008 is350 today , went to auto zone and received this code. I was out w my friends and seen my engine smoke up a little bit but it still drove like normal and didn’t hear or see any problems since.
Same here ...I think we should flush the transmission fluid ,because I need that check engine light off
I notice I have this problem about 30 minutes of driving on the freeway, especially if there is stop-N-go traffic. I replaced the solenoid and received the code again. I will try replacing some of the fluid. Note: I do not plan to replace all of the fluid for fear of clutch slippage (the clutch wears out over time, and if you replace with new fluid, it may slip because there is not enough metal filings left in the fluid to stop the slip. I also plan to clean the connections to the CPU near the battery and test the voltage on the solenoid (not sure how yet).
@@edsonhernandez5109 did flushing fixed it?
Great video. Well done and you covered everything.
Hello. Excellent video. help me. My 2013 toyota corolla Le has this same code P2757. Will I need the same solenoid valve from this video, based on the part number?
I have same issue with my 2013 corolla. I had to pull off the highway, massive shaking noise. My P2757 says solenoid "stuck off"
what is the exact code everyone is getting? Can everyone please chime in to their fault code. It appears that the SLT solenoid is not fixing the problem with a lot of people.
I am getting "P2757 Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance or Stuck Off"
It could be multiple from what I’ve heard. I guess the best way to tell is to do an ohm check and test them all out and see if they still click
I replaced the solenoid and the light is still there, shifts fine during highway speeds and goes all the way into 6th gear, when I’m barley accelerating from like a stop sign or what not I noticed how it jumps between 1000 to 2000 rpm, any leads on how I can fix it? I feel like it doesn’t even slip it just jumps up
Did you ever figure out what the problem was with the jumping
hi question should i change both solenoid? or just one?
Great video!!! I have the check vsc code now and it won’t shift from 3rd to 4th.. some days it will but most it’s stuck in 3rd
Hey bud! What’s the update on your car? Mine does that sometimes
@@edsonhernandez5109 mine is still acting up.. I need to replace or clean shift solenoids
@@iniquetvpro I took it to the shop and pretty much told me I will need a new transmission but My transmission only does that when it’s cold ...once it’s warmed it doesn’t do that at all...so maybe I should hold off before actually doing a transmission replacement
@@edsonhernandez5109 I have the exact same thing... did you end up replacing the transmission? TIA!
I got that code Nd a really bad shudder at about 1500 rpm. Could it also be that?
Is the part you installed only for code P2757????
Thank you wasnt sure were it was
Mine doesn't go reverse. What could it be ?
Does it shift better now or the same as before?
If your trans is shifting well, swapping the sensor won't improve shifts. Definitely night and day in the shifts from when it wasn't receiving signal from the sensor.
Where do I fine the kit on amazon?? Can you provide a link or part number? I would really appreciate.
The part number is at 2:00. I bought it directly from Lexus.
@@JonnyBarajas is it also for RWD?
Do you need to unplug the battery for this job and what’s the size of the bolt holding the T shape plate?
I get the p2757 code all the time on my 2010 corolla, is my issue the same? Should I replace the Automatic Transmission Control Solenoid? Or could it be one of the other solenoids? Thank you.
I have a 2011 Corolla with the same code that came on twice. I took out all the solenoids and tested them. All but one of them were perfectly fine. The part number that you need for the replacement solenoid is 35290-52040. Do the basic stuff first to confirm that the solenoid is the problem. Check fluid level, replace dirty fluid and filter, check for leaks and then test the solenoid.
@@stephencook7337 how do you check individual Solenoids
@@stephencook7337 Do you happen to know the appropriate voltage to apply for the solenoid? Possibly 7 volts? I have heard 12 volts may damage the solenoid, although I do not have documentation to confirm.
What is the part number for the solenoid?
Hi Johnny. Thanks for shared it.Jacky here. My Lexus is250 had a code P0756. Solenoid B performance stuck off ! Which solenoid have a problem ? Can help and advise.
hey man so i got this same code in my is350 but we replaced the fluid the pressure solenoid and my light keeps coming on do you think it could be the torque converter?
Damn same here. Except I haven't fixed anything yet, any updates on yours or still code?
Same thing happened to me... I changed the SLU (TCC) Solenoid and problem solved! The VSC warning is gone as well...
@@obsessivecollectingdisorde7762 what drove you to the SLU and not the SLT like this guy changed?
I took it to aamco on the same code but they told me it was not the solenoid just loss of pressure. What now
Plz bro ,, which one is solenoid E
I got this code
P0985 Shift Solenoid 'E' Control
But I didn’t know which one is it
Slt or another one
Thanks for your video. It’s helpful
not 35280-30050?
yes johnny must have an all wheel drive because 35280-30050 is the correct part number for my base 2007 is250. also, change both the slt and slu solenoids. part 35290-34010. this is how u fix it
I changed out the solenoid and the code didn’t appear for a while, later on it came back and I started having problems with the gears shifting early, I go into 6th gear at 40 mph, Is that normal or should I do a transmission flush?
yes, with low throttle application it is normal to be in 6th gear at 42mph.
@@jl345 do you have any idea how to fix p2757 cause I replaced the solenoid from the video but it still came back
@@akatheunknown4310 we’re you able to fix this issue?
great viedo... how do you know wich solenoid is it... i have the same code same car.. but there are different solenoids inside.. how do i know wich one is it??
@2:00 you can see what solenoid it is
apparently this error corresponds to this electromagnet
I changed my solenoid and I’m still getting the P2757 code ? Any other thoughts on what else it could be
Hi. My IS250 when you slow down it drops to 1st gear is this normal. I want it to hold 2nd gear until it stops completely
Brotha I have the P2757 code in a 2006 Lexus IS 250 : torque converter clutch pressure control solenoid control circuit performance or stuck off . I got this diagnosis from autozone the question is :is that the same solenoid u changed in the video or is the one u mentioned that looks similar??? Thanks
*2007 Lexus is250 not 2006!!! Sorry !!
Hey i have same problem did you solve it? what did you change or repair?
Hi Jonni I just saw you video and I have the same problem in my 2006 is 250 I know the video was more than a year ago let me know if I can ask you more question thank you
How do you disconnect the connector , I’m stuck on it and it won’t come out
You just need a very tiny pocket screw driver or small pocket flat headband you need to press very hard on the connector tab and pull it out
So i changed out the lock up and pressure control solenoids and it did not resolve my vibration going into 5th and 6th gear.
Did you figure it out ?
Yeah no and its getting worst. Going to so another fluid drain and fill but this time add instant shudder fix. And then ill see and if still bad give up and send to transmission shop.
Did you need to drain the transmission fluid first?
did u watch the video 😭
Where did u take ur car? Which state?I live in NY I have a Lexus Es350 with the same problem it’s pressure controls solenoid A,B and D.U know anyone in NY THAT CAN FIX IT?
This is my shop. This is what i do for a living in AZ.
Jonny The Car Doctor so my car has a problem it’s pressure controls solenoid A,B and D so does this mean I have to change the whole transmission or just those specific parts in the transmission?? Plz tell me
@@JonnyBarajas I'm in Phoenix. How much do you charge for this?
What could be the cause of this solenoid problem? Design fault?
Hello I have Lexus IS 250. I have p2757 code. I changed solenoid and oil in the transmission, should I change other solenoid or maybe the problem is in the computer?
Did u solve it?
Hi I have a 2007 Lexus gs350 with a p2757 code, what solenoid would I need to repair this issue, any help will be appreciated, thank you
what did you end up going?
What material was that oil filter made of?
I had the problem on my original transmission with 200,000 miles. So I went and got a 50k miles transmission, got it install and everything…. And the same problem can back ..
Wonder what the dealer charges for this? Somebody I know at work needs to do this, he just got the trouble code👎
Independent mechanic quoted me $1000 parts labour and fluid.
Code came back???
Please I need your help I changed my gear 3 times
I have Lexus LS 430 - 2005
I have code P2757
Torque converter clutch pressure control solenoid control circuit performance or stuck in off position…
Will it be the same setup for the is350?
Different part number ? 35280-30050
For code P2757
Rwd one ☝️
Your the real bro 💪🏽
Will this work for a 2006 Lexus is250? It barley hit 100k miles and it shows the exact same code, transmission fluid was changed 18k miles ago
Basically the same car. If you have a faulty solenoid, this will fix the code.
Jonny The Car Doctor will bad solenoid make car to stuck in 3rd gear
Bro my gs300 has no codes... But doesn't shift 5th and 6th gear
Will this cause my transmission to get stuck on fourth gear? because it's doing it. 07 Lexus IS 250
I had that problem, I replace solenoid D and B, and it’s Fix my issue
@@osbaldogervacio3533 I have an 06 is250 that won't shift into 4th. Did you have that same problem? How'd you know it was those solenoids?
@@juanposadas6165 I would just replace the transmission, don’t throw money into it
I have the same issue. No power in 1st and 2nd gear vsc light on code p2757. I wanna try to flash the pcm before doing this.
Ann Borromeo have you flashed it yet?
I tried to flash it but it didn't work. I just changed the filter and the fluid and the car shifts better but the code is still there with problems shift from 1st to 2nd.
Did you fix the problem, I been having the same issue with 1st and reverse
I changed all of my solinoids, but the engine light is still on and it doesnt shift to 5th and 6th. Do i need to reprogram?
No, just means it wasn't the solenoid.
@@JonnyBarajas had O'Reily diagnosed it first, got code p0798 c1201 c1223 u0123 u0129. Changed all PCS and went to autozone and diagnostic came up pressure control solenoid A and bank 1, 2 off, but thats due to breathers. Why is it showing up pcs A, yet shifts to 1,2,3,4, but not 5&6
@@JonnyBarajas you think its the Transmission Control Module TCM????
If it doesn’t shift you need a new tran
i did have the same problem and i already changed the selenoid etc. bt ut after 2 months its pop up again do you what cause of it?
Did you find out why it came back? I saw another video where the cars computer wasnt sending proper voltage to the solenoids. And thats why it kept returning.
Justin Workman could you place the link here??
Cristianto Sudino please am facing the same problem, my car stuck in 3rd gear and doesn’t move to other gears please if anyone have any solution for that i will appreciate it
@@Don_Latino mine was different, my car still move to 6 gear just I don't know why the code comes on and I go for diagnostic they said that it because the torque converter in the engine and ask for new transmission
@@cristiantosudino8681 Do you have any news on how you fix the problem ?
I’m still getting the p2757 code after change the solenoid?any ideas Johnny
low tranny fluid ?
Do you have any news about how you fix the problem ? I have the same after changing valve body w/ solenoid, nothing change
Why didn’t they show taking the solenoid out?? Does the valve body have to come down???
Did you even watch the whole video? You drop the trans filter to get to the bolt
I have the same code,people say it’s the other solenoid
Where are you located?
can I used the same part for 2006 Lexus gs300
I would first make sure the parts are identical. I don't know for sure.
Jonny The Car Doctor please i really need your help please, My is250 2006 stuck in 3rd gear and refuse to move forward to other gear and i scanner the transmission and find out p0761 and p2714, please do you think after replacing those solenoids that my car will select normal and please can you educate me on quantity of oil to put on the transmission please.
@@Don_Latino Hi Don. Did you have any luck with fixing?
@@Don_Latino what’s the update on your car bro?
@@edsonhernandez5109 Bro i bought complete gearbox, as i was told that my gear can’t be fixed anymore. Any luck on your own gear?
Better doing it yourself then going to Lexus it will cost you a arm and a leg when fix it you know more about your car
I watched this video and replace mine. Lights came back on with the same code back on p2757
Did you use a part from toyota or did you use aftermarket? (eBay, Amazon.)
@@cameronchampraya7948 part from ebay. Maybe thats why
You only used 2 bottles of transmission fluid?
I’m still getting the p2757 code after change the solenoid, I changed also oil in the transmission, what should I do next?
Were you able to fix it? I’m having the same issue.
@@lecahier I didn't solve it. The error is back
Did you fix your issue?
Johnny my got code p0894?
What would an average mechanic charge for this ?!
I don't know, I would ask a mechanic.
Jonny The Car Doctor 🤣
They charge me 1350
I was like, okay I’ll be back loll
Bro it’s common sense and rule of thumb if you plan on dropping any tranny pan you 100% change the filter while you are in there just saying kinda dumb to even think about reusing the old filter with new fluid smh 🤦🏻♂️
I have same code on my toyota yaris 2009
is that 250 AWD ? or 2WD
i have the same code on my IS250 AWD .. is this the same part ? or it change ?
@@ahmadrammal9190 did you ever find out if this is the same part number for both 2wd and AWD?
@@andrewcarter6884 noo! I have sold this car... it's annoying asF!
You gonna messup the tranny, you need at least 5 qt.
احسنت
Did the job today & still have the code 😔🤢
Andres Vazquez same here
Hey man did you ever fix that problem of find out what it was
Have you reset your ecu yet??
Que. No. Hablas. Español estria. Bueno. Que. También mi. Jente. Que. No. Habla Inglés entienda. Gracias
TCM!!!
Pp