Triumph TR2 "Long Door". Making of a new door skin.
ฝัง
- เผยแพร่เมื่อ 2 มี.ค. 2024
- Here we are shaping a new door skin for a Triumph TR2 "long door".
Paper template, cut with Dewalt electric shears, shaped with English wheel and a little bit of Eckold Shrinker.
Adjustment with a wooden mallet on the railway track.
Spot welding with MIG, then bead welding with TIG, planishing with hammer.
a bit of bead roller, adjustment on the door casing, assembly.
Fabrication d'un nouveau panneau de porte pour Triumph TR2 "Long Door".
Gabarit en papier siliconé, découpe à la cisaille électrique Dewalt, formage à la roue anglaise et un peu de rétreint sur l'Eckold.
Ajustement de la forme au maillet en bois sur le rail de chemin de fer.
Pointage à la semi, puis soudure complète au TIG.
Un peu de planage au marteau et au tas.
marquage des plis à la rainureuse/moulureuse, puis repli autour du caisson de porte, ajustage et assemblage. - ยานยนต์และพาหนะ
Beautiful work. Good to see your son learning the craft. Teaching my grandson too-
You Sir, are a genius.
😆
Sans surprise: que du bon...
lot of work.........a keen eye....luckily i can buy new all my panels for my tr6....that type of metalwork is hard work but also really satisfying.
Fantastic metalworking, great video.
Once again, a masterpiece !. Good job.
Sarebbe un vero piacere poter assistere dal vivo.
beautiful work
Your preparation for the fold-over (around 13:10-25) is very interesting, a great idea.
Excellent panel beating once again. First class work 👍
thanks a lot
J'adore vos vidéos c'est une vraie formation pour moi 😊 merci je mets en œuvre toutes vos techniques sur mes projets de restauration.
👍👍👍👍
Не тривиальная работа, это тебе не профильную трубу в порог приварить))
Работа мастера. Рад, что сын принимает участие в ремонте.
Спасибо.
Большое спасибо за ваш комментарий :-)
always a joy to watch. What gauge of steel are you using for the skin ,,, it actually didnt look that bad to start with , but not pretty when you peeled the old skin from the frame.
I used 1mm thick steel.
The original sheet metal had been very badly repaired, and there was almost 1cm of putty...
At 13:50, what kind of clamps are these? They look very helpful for this type of work, would like to buy a few! As always, awesome work!
www.amazon.com.be/-/en/KS-Tools-115-1026-Micro-Grip-Pliers/dp/B014E957CI/ref=asc_df_B014E957CI/?tag=begogshpadsp-21&linkCode=df0&hvadid=680238894614&hvpos=&hvnetw=g&hvrand=17813128232495591718&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=20060&hvtargid=pla-2274726112053&psc=1&mcid=d828746bdb453f8eab35a95e7613721b these are the ones :-)