Did my 2005 Saab 9.3 Aero convertible yesterday -lance is brilliant for sills and doors - took wheel liners off and used other product for wheel arches - so easy to use !
Car is looking fantastic. Make sure the drain holes running down the sills are clear mine where blocked by a cavity wax after it was done. I poke a small bit of wire in the drains every few weeks to make sure they are clear.
Just used the same after watching this on ky black 159 ti, got a inspeftion camera into sills etc to check for rot, all solid, relief. The cavity wax ive injefted every year for past 6 years was sporadic, the BH S50 is ecen and has crept into the crevices where condensation build. Great vudeo, stunning work on that GTV, what a stunner.
I love this video! I love Alfas particularly the 916, which were fortunately galvanised! I own a South African Alfasud and furlough has allowed someone with no mechanical talent whatsoever to find lots of bits of originality 😂😂I found this video brilliant and I may have a go at rust proofing it next year when the weather warms up a bit, as a result of you showing how it's done 😀
I did my old gtv v6 in dinitrol about 14 years ago, i no longer have that car as i sold it when we moved house, the car was on the road until June this year 2023 although there was mention of rust in a few places. Ive got a 2.0 t-spark and thinking of treating that but the thought of removing the side skirts again is putting me off i recall they were a bit of a bugger to get off.
Aware this vid is 3 years old, but the reason it is initially runny is so it is thin enough to run into crevices, such as between panels that are spot welded together, where it will then cure.
You need the fluid to be of low viscosity and mist when sprayed at first to travel and creep into and around corners and crevices etc then thicken and cling over a short period afterwards then become relatively temperature stable at higher ambient temperatures.
hi rick what would you recommend for the underside of the body? i have 2016 plate car but the previous owner lived in a high moisture area so some of he impact areas have surface corrosion - i wanted to brush them off and apply underseal, is there anything you would recommend?
Does this product kill any existing rust in the cavity or box sections? Reason I ask is that if it’s sprayed over existing rust, will it just carry on corroding inside?
@@adrianrenshaw4439 hello, thanks for sharing. Curious if I should only use the product or use it along with rust oleum for my F150…rust building up on both sides do to water leaks. Of course all the electrical wire-looms sit in the channels where i’m seeing rust.
I don’t sorry, although I will be looking for one myself soon. I understand these are quite hard to come by just like a lot of parts for these cars! If you find a stockist please let me know 👍🏼
This is a cavity wax meant for cavities the naked eye can't see, for stuff you can see you're supposed to use Dynax UC which leaves a clear protective coating.
Thats got to be the best gtv undercarrige in the world, definately in the Uk.
Did my 2005 Saab 9.3 Aero convertible yesterday -lance is brilliant for sills and doors - took wheel liners off and used other product for wheel arches - so easy to use !
Car is looking fantastic. Make sure the drain holes running down the sills are clear mine where blocked by a cavity wax after it was done. I poke a small bit of wire in the drains every few weeks to make sure they are clear.
TABRAO thanks for the tip 👍🏼
Top job, I’ve just bought a load to do my Defender, great idea using the masking tape. 👍
Dear lord the underneath of this car is clean. Amazing work.
Just used the same after watching this on ky black 159 ti, got a inspeftion camera into sills etc to check for rot, all solid, relief.
The cavity wax ive injefted every year for past 6 years was sporadic, the BH S50 is ecen and has crept into the crevices where condensation build.
Great vudeo, stunning work on that GTV, what a stunner.
I love this video! I love Alfas particularly the 916, which were fortunately galvanised! I own a South African Alfasud and furlough has allowed someone with no mechanical talent whatsoever to find lots of bits of originality 😂😂I found this video brilliant and I may have a go at rust proofing it next year when the weather warms up a bit, as a result of you showing how it's done 😀
Thank you for the positive comments Howard. I love the Alfasud! Fantastic cars. I’m glad you found this video useful and good luck with the work 👍🏼
I bought some this for my GTV too! Watching with interest :0)
I did my old gtv v6 in dinitrol about 14 years ago, i no longer have that car as i sold it when we moved house, the car was on the road until June this year 2023 although there was mention of rust in a few places. Ive got a 2.0 t-spark and thinking of treating that but the thought of removing the side skirts again is putting me off i recall they were a bit of a bugger to get off.
Aware this vid is 3 years old, but the reason it is initially runny is so it is thin enough to run into crevices, such as between panels that are spot welded together, where it will then cure.
Amazing. So clean. How has it held up over the past few years?
You need the fluid to be of low viscosity and mist when sprayed at first to travel and creep into and around corners and crevices etc then thicken and cling over a short period afterwards then become relatively temperature stable at higher ambient temperatures.
You're a legend my friend thank you
Very very good service. Great.
STUNNING
Quite disturbing how clean the underneath of this car is!
😂
hi rick what would you recommend for the underside of the body? i have 2016 plate car but the previous owner lived in a high moisture area so some of he impact areas have surface corrosion - i wanted to brush them off and apply underseal, is there anything you would recommend?
Does this stuff smell after it has been applied? I'm thinking of putting it down in the interior panels of my camper van.
Could I ask what the dark grey underseal is and how it was applied ? Ta
Does this product kill any existing rust in the cavity or box sections? Reason I ask is that if it’s sprayed over existing rust, will it just carry on corroding inside?
Yes s50 will stop/capsulate any rust in there that you can’t get to
@@adrianrenshaw4439 hello, thanks for sharing. Curious if I should only use the product or use it along with rust oleum for my F150…rust building up on both sides do to water leaks. Of course all the electrical wire-looms sit in the channels where i’m seeing rust.
@@Sheeeeeeeeeeeeiiitt I would personally only stick to bilt hamber products with bilt hamber
Hi Rick how many cans did you use?
Derek Simpson, for everything in this video I used about 80% of 1 can. It goes a long way
Ricks Garage thanks good to know
I am seriously looking for a Gtv 916 airco condensor ph2 any knowledge about this ? Thanks in regard
I don’t sorry, although I will be looking for one myself soon. I understand these are quite hard to come by just like a lot of parts for these cars! If you find a stockist please let me know 👍🏼
Hi Rick brilliant videos !!! Currently doing a 156 v6, what did you use on the under body ? Looks black/grey?
Keep up the good work 👍
Thanks Matt. The undercarriage has been stripped back to metal where required, epoxy primed and stone chip paint used over the top.
Cheers pal 👍 can you rem the product you used on the under body ?
Do you think it will be back on the road in 2020?
TABRAO I’m hoping so haha. I’m not far away now
Can i spray the front strut tower with shockabsorbers on the car wit this product?
This is a cavity wax meant for cavities the naked eye can't see, for stuff you can see you're supposed to use Dynax UC which leaves a clear protective coating.
Has this car been dry iced cleaned it look new underneath
Hi Justin. No dry ice here. The car has been fully stripped and rebuilt underneath from scratch by me 👍🏼
I thinking of using the white product as I have a white car, have you used