First of all thanks for your clear video presentation about hooking up the KTag and how to back up and save the file. Where I can buy original KTag new or used.
Thank for your video presentation about KTag back up and writing the programming procedures. Just want to know how much the KTag and system requirement to install the program in computer desktop or laptop thanks.
Hello, I know this is a long shot but my mercedes ECU got oil inside of it from the wire harness and causing misfires , is it possible to open it and clean it out effectively?
Can a renew cable able to read old 9.7me with ktag . Will the renew cable write used 9.7me ecu. Will the new ecu need to virgin or just over write. Thanks.
is it possible to leave external flash from new ecu,i mean only clone eprom and pmc and flash to leave it stock?its possible for clone ecu to star the engine and run perfect?
Hello I have an engine from a w203 om612 standalone But would like to clone my ecu so I can run the same standalone in another similar engine I'm using kess v2 Is there anything that you could show how to do
The best kit to get are the 'RED' KESS and Ktag 2 separate programmers , however both are sort of 'cousins to each other, and work slightly differently, DO NOT buy the earlier 'BLUE' color versions, as they are crap, get the 'MASTER ' versions, NOT the 'SLAVE' units, comes complete with adapters and you do need to study up a bit on Ytube and forums to get the gist of how to do the work, best of luck, BLESS 😎
Hello, I bought a 2000 ML320 and currently in limp mode due to previous owner replaced the original PCM/ECU. -my question to you is …without the original PCM /ECU can you program a new used PCM/ECU if yes, can you do it if I send it to you? Thanks!
Subscribed to your chanel. Thanks for sharing your knowledge. After doing this procedure of reading and writing the 3 data files, will the vehicle start up? Will the 3 data files contain the immo files or will that service need to be separately completed by an automotive locksmith.
No update for your question I also want to ask same question. thanks Also want to know if this can be use for heavy equipment like for detroit DDEC, Cummins, Cat
no, no need to finish off programming at locksmiths or the 'MAIN STEALERS' as the data has been transferred over, 'cloned' from the original to the donor ecu. 🙂👍
@@jhunbanton7414the Ktag can be used for Detroit ECUs in theory. But unless your flashing after-treatment delete maps there's no point, as you can just transfer parameters.
Dear Boss, I see how good... Well, my question is, after a transmisor installed is necessary resetting or re programs the system? Also, i changed the transmission control plate (is electric parts) with the solenoids. I have to resetting the computer? Do you do performance job to ECU? 1999 Slk230. I ll be pending on it.
Hello. Do you think the replacement will work without reprogramming on a Mercedes S320 2006? I want to mention that the replacement is a exact same model second hand and it also comes with two keys and immobiliser. Thank you !
I have a question what would happened if you swap the chips ? My look the same but different part number I have a 908 áutel I can’t use lol I would be nice if you can tell me if I can clone or reprogram a rebuild ecu
But why not to solve the original ECU grounding issue instead of replacing it, i believe that would be more cost effective. Any how thanks for the good explanation.
Is it possible to use ktag to virginize a bosch 2.8 ME as in make it factory fresh where it will need initialization and programming? Or is ktag only good for cloning the ecu?
Was great How do you know where to connect the krag cables to read the ecu? What happened if u just switch eeprome? Do you know any book or anywhere we can get training to do this kind of work,,?
i think he need to. the vin number doesnt change when he writing the files to the new ecu. the easiest way is to disable the immobilizer and use a good ecu with the same numbers. if the numbers is correct the checksums is correct.
What is the return time after receiving the faulty ECU? I have had bad experience with another company on a Ford Escape ECU, it took them 5 weeks to deliver and then it did not work. I only have this car and need the ECU back as soon as possible, hope you can help. Its a 2008 ML350 4Matic. Thank you
Hi on ktag if I clone a ecu for my car 2008 Mercedes C300 what option would I choose on the w204 would I go with the C300 2009 Bosch me 9.7 or would I choose something different
How hard it’s to find or reprogramming a 07 dodge sprinter 2500 3.5 v6 gas , my mechanic has my van for almost a year and every time I called him , he said the computer he ordered was the wrong one , and the dealer don’t make computers for that van , and it makes it harder to find the one that fits A this point Idk what to do , any help or advice would be great
After did this car is start and work if yes make comleate video until car start so then we can sure this procedure is good because some people say car will not start
Hello friends ! I have a question. I have changed on a R classe 320 cdi an Engine Ecu because the original was Dead... Now the car start normaly but impossible to change the gearbox position... STUCK on P position...what Do you think ? The car stays a long time without battery and maybe the auxiliary battery could be empty or I must code the Ecu of gearbox because the engine ecu has been changed ? Sorry my english I'm French 👍 Cheers Guys
How much does this setup cost Does all the software come with it Where do the files come from Can it delete dpf through software Mercedes gl350 bluetec
![Чип Тюнинг [ Прошивка ЭБУ ] Как работать c Кесс v2 / Секреты Kess v2](/img/n.gif)
Thank you so much, that is the most clear video about reprogramming the Mercedes ECU,
This guy procede slowly and nicely!
Good job!
precise, clear and to the point, without flaffing about, clearly a good teacher 😎👍
That looks just so easy to do at home with stuff you find around.
thanks Mate well done . your video is the best I ever watch about the programming ECU .
Excellent video, Thank you
Learned so much in 15 minutes. Thank you.
just love his teachings
Your video is greattttt, your explanation makes this looks easy, thanks
First of all thanks for your clear video presentation about hooking up the KTag and how to back up and save the file. Where I can buy original KTag new or used.
Certainly
The best explained video on internet
Thanks
Plz keep posting
Thank you for a nice video.
This is the best guidebook of educational videos I have ever seen.
thank you very much.
Most clearest videos
Great JOB thank you for sharing such amazing work and information.
Thank you so much for an AWESOME video, you're a LEGEND, 😇
Great video. Thanks for the tutorial guidance.
Absolutely superb sir.thankyou.
Steve from the uk.
Love this videos keep making these type of vid thumbs up 👍🏼
Very nice video. Very informative.
Beautiful👍 u did a good job bro
awesome video thank you for teaching us
You can done with it without opening ecu with pcm flash and module 77.But nice video,good job!
Wow this is some high-tech stuffs.
Talk about messing someone up a little that commercial interrupted my learning lol damn it
thank you for explanation
Well done my brother,
Can you change the Catalytic Convertor Efficiency Alarm Threshold?
Thank for your video presentation about KTag back up and writing the programming procedures. Just want to know how much the KTag and system requirement to install the program in computer desktop or laptop thanks.
Thanks for provide very useful movie
Hello between k tag and kess which is good for a start if you want to buy one buy one
Where to get files if I don't have any backup.?
Hello, I know this is a long shot but my mercedes ECU got oil inside of it from the wire harness and causing misfires , is it possible to open it and clean it out effectively?
Wher is this guy when you needed at All we can do is look at it we don’t have tools software or knowledge to do all this 😂
I'm here www.karmanauto.com
Nice video
Thanks appreciate it
That's awesome thank you so much
Hi thanks for the great video
Do you use the original k tag or a a copy one?
Can a renew cable able to read old 9.7me with ktag . Will the renew cable write used 9.7me ecu. Will the new ecu need to virgin or just over write. Thanks.
Can I use this device on other brand ecu like honda toyota or suzuki plz reply me its important?
Thanks for advis i love you brother
is it possible to leave external flash from new ecu,i mean only clone eprom and pmc and flash to leave it stock?its possible for clone ecu to star the engine and run perfect?
Best way is to do with abrites fbs and vin transfer only
@@vehix411 k tag no?
Sir What is the difference between KTAG 2.23 version and KTAG 2.25 version?
Good job thank you very much
mate were are you located how can I send my ecu to you for repairs or cloned
We're are you located I'm having same issue
can you explan more information about 3 file. what do they work for?
Hei mr.. please tell me what the black bolt in the middle of the cover ecu? air flow or what this....
Would the new ecu have the same vin number after programming?
Yes
Hello
I have an engine from a w203 om612 standalone
But would like to clone my ecu so I can run the same standalone in another similar engine
I'm using kess v2
Is there anything that you could show how to do
That's amazing. .you have all programing kit .. can I get all set like yours?
Thank you so much for this effort
The best kit to get are the 'RED' KESS and Ktag 2 separate programmers , however both are sort of 'cousins to each other, and work slightly differently, DO NOT buy the earlier 'BLUE' color versions, as they are crap, get the 'MASTER ' versions, NOT the 'SLAVE' units, comes complete with adapters and you do need to study up a bit on Ytube and forums to get the gist of how to do the work, best of luck, BLESS 😎
Hello,
I bought a 2000 ML320 and currently in limp mode due to previous owner replaced the original PCM/ECU.
-my question to you is …without the original PCM /ECU can you program a new used PCM/ECU if yes, can you do it if I send it to you?
Thanks!
Subscribed to your chanel. Thanks for sharing your knowledge. After doing this procedure of reading and writing the 3 data files, will the vehicle start up? Will the 3 data files contain the immo files or will that service need to be separately completed by an automotive locksmith.
No update for your question I also want to ask same question. thanks
Also want to know if this can be use for heavy equipment like for detroit DDEC, Cummins, Cat
no, no need to finish off programming at locksmiths or the 'MAIN STEALERS' as the data has been transferred over, 'cloned' from the original to the donor ecu. 🙂👍
@@jhunbanton7414the Ktag can be used for Detroit ECUs in theory. But unless your flashing after-treatment delete maps there's no point, as you can just transfer parameters.
Thanks 👍
Dear Boss,
I see how good...
Well, my question is, after a transmisor installed is necessary resetting or re programs the system?
Also, i changed the transmission control plate (is electric parts) with the solenoids. I have to resetting the computer?
Do you do performance job to ECU? 1999 Slk230.
I ll be pending on it.
Hello. Do you think the replacement will work without reprogramming on a Mercedes S320 2006?
I want to mention that the replacement is a exact same model second hand and it also comes with two keys and immobiliser. Thank you !
Thank you so much,but i wonder how you could writing without select Restore and cancel Backup selection!
I have a question what would happened if you swap the chips ? My look the same but different part number I have a 908 áutel I can’t use lol I would be nice if you can tell me if I can clone or reprogram a rebuild ecu
I want to learn ECU servicing, please guide about various jig's for ecu
hello, i have a problem with the dump from the MPC564 and the EXTFLASH M58BW16DB.... your not have this dumps???
Hi friend can you show me a detailed video of odometre KM programming using UPA USB Programmer
The part number for a VW Phaeton ECU is the same as a Bentley Spur. Is it cloneable?
But why not to solve the original ECU grounding issue instead of replacing it, i believe that would be more cost effective. Any how thanks for the good explanation.
Is it possible to use ktag to virginize a bosch 2.8 ME as in make it factory fresh where it will need initialization and programming? Or is ktag only good for cloning the ecu?
No you might read it but you will need to have software to verginize
Hello, thanks for sharing the video.where can I get a ktag to buy?
Was great
How do you know where to connect the krag cables to read the ecu?
What happened if u just switch eeprome?
Do you know any book or anywhere we can get training to do this kind of work,,?
Thanks you love you !!
Sir you ues urgnal ktag or clone
Hi if i want egr,dpf off how is procedure thank you
Hi, thanks. How can MED17.7.X Mercedes be cloned?
karmanauto.com/product/frm3-footwell-module-repair-bmw-or-mini/
i'm trying to figure out the right adapter. which one are you using? (number14....)
Very good, 1 question do you have to reprogram the keys for the car in order to start?
i think he need to. the vin number doesnt change when he writing the files to the new ecu. the easiest way is to disable the immobilizer and use a good ecu with the same numbers. if the numbers is correct the checksums is correct.
Is anything on Mercedes Benz reliable?
Not the cheap ones
No
To be fair the module is made by Bosch.
Yes there is, now go back to your reliable Rover
hi, from where u bought the adapters ?
What is the return time after receiving the faulty ECU? I have had bad experience with another company on a Ford Escape ECU, it took them 5 weeks to deliver and then it did not work. I only have this car and need the ECU back as soon as possible, hope you can help. Its a 2008 ML350 4Matic. Thank you
For Mercedes me9.7 Ecu it’s 24hr turnaround
Very good video friend. But there is no other way a little easier to do this ..?
Thanks
Why you did not write dirctly for new one why you read it and save it firest
we had a costumer make a mistake he wrote ORIGINAL on new ecu and on original ecu NEW we couldn't revive it didn't have original
Hello what if I don't have my ECU I sent out to a company they can't found it what do I do .
Hi on ktag if I clone a ecu for my car 2008 Mercedes C300 what option would I choose on the w204 would I go with the C300 2009 Bosch me 9.7 or would I choose something different
Dose that program work with a 97 sl500?
is it posible to add another key to the car .... my alfa needs the key to be done at factory and then the dealer tells the ecu to recognize it.......
does it have a 06 w11 in there
bflash error code when erasing 7f-31-22, how do I fix 2014 cla
Does the 12 volts come from the ktag itself? Or do you have another voltage supply?
From KTAG adapter. You don't need another.
Dear,
I need to
replace an ECU on 2008 Audi Q7 4.2 FSI, the engine control module is Bosch MED
9.1.1. Ktagl do the complete job? read & write?
what if you selected backup to read only one time instead of three?
So this is for only Mercedes cars?
Is there one of there that is universal for all cars?
how did you know fp relay ground is a software issue and not a device ?
How hard it’s to find or reprogramming a 07 dodge sprinter 2500 3.5 v6 gas , my mechanic has my van for almost a year and every time I called him , he said the computer he ordered was the wrong one , and the dealer don’t make computers for that van , and it makes it harder to find the one that fits A this point Idk what to do , any help or advice would be great
What about the w205 finding it difficult to program
is ktag chinese you use on this video?which chinese website?
After did this car is start and work if yes make comleate video until car start so then we can sure this procedure is good because some people say car will not start
Do you have any experience with ECU programming for engine swaps on Mercedes platforms? W203 or W211
If the ECU has the same exact part number does it still need to be reprogrammed?
When the numbers is exactly the same u dont need reprogram it but the immo have to be shut off
Where are you located?
We have a location in Portland and Phoenix it all depends on what work you need done
Dang it im in Nyc
Just a question, why not rewrite from the obd port?
Not possible to read or write all 3 files it’s security protected
I have a used fuel pump control module for 2011 S550 4matic can you reprogram it for me if so how can I contact u directly so I can send them to u
Send me part numbers of you modules to vehix411@gmail.com
Hello friends ! I have a question. I have changed on a R classe 320 cdi an Engine Ecu because the original was Dead... Now the car start normaly but impossible to change the gearbox position... STUCK on P position...what Do you think ? The car stays a long time without battery and maybe the auxiliary battery could be empty or I must code the Ecu of gearbox because the engine ecu has been changed ? Sorry my english I'm French 👍 Cheers Guys
Is this a clone version?
hi men thanks for u vidoe this programer u buy from ebay or is orgnial one?
How much does this setup cost
Does all the software come with it
Where do the files come from
Can it delete dpf through software
Mercedes gl350 bluetec
I need to learn more
hello can i have backup Micro SD Ktag 2.25 Please thanks