Programming ECU by BDM . (English version)

Video information about using BDM port with KTAG and Galleto.
Technical support - www.opelis.lt
FILE SERVICE ( EGR OFF ; DPF OFF ; POWER INCREASING etc . )
All GM car modules programming

[@xriuxa]

Saunuolis , tikrai draugiskas norm zmogus 🙂👍

[@fprossesor]

nice video, more videos pls.

[@train4905]

Dear sir.
The bdm frame looked fantastic.
Please may i ask .what make is it.and where you bought it from.
Thanku kindly,steve from the uk.

[@AUTOchipasLT]

please - www.ecubay.com

[@mirostudiomachel8493]

I’m facing some difficulties on using BDM on saving and converting files from BDM to TMP pro2 ? I want the files to change to format Bim to use on the transponder .

[@AUTOchipasLT]

you can't use those files for programming transponders.

[@s3ries3]

I’m looking to get a KTAG clone to do BDM work, however I’ve heard that they can be highly risk and result in bricked DME’s.
Have you experienced any issues with your clone KTAG/ KTM?
Thanks!

[@AUTOchipasLT]

All depends of quality of clone. Of course you can have problems if tool is bad quality. But if tool is made from quality details , the risk is minimal.

[@s3ries3]

Thanks for your input on this. Could you recommend the source you get your tools from?
Thanks!

[@legin3753]

@@AUTOchipasLT where did u get urs plz

[@AUTOchipasLT]

@@legin3753 i bought them on ALI many years ago , at this moment i use other tools.

[@legin3753]

@@AUTOchipasLT cheers I have the real kess v2 myself would love to get into the ktag I might buy clone and mess with it like I did with kess v2 then get original

[@fuzzs8970]

Hi
Can you just weld wires if one doesn't have the bdm frame?
Thanks

[@AUTOchipasLT]

yes ,of course

[@morgan7402]

hello for a wrong engine reprogramming send the program file in the external flash?

[@AUTOchipasLT]

you can write any kind of file by bdm , so you need to know what you are doing

[@Lamelldiff]

What slave tool would you recommend for bmw edc16 via obd?

[@AUTOchipasLT]

for EDC16 always works good MPPS

[@geoffjohnson357]

Hi great videos ,I'm trying to find the universal Bosch adaptor for the cloning,,,the one you showed with removable pin to fit k-tag galeto etc..I see. 112? Thankyou

[@AUTOchipasLT]

Hi , those adapters you can buy from www.ecubay.com/

[@geoffjohnson357]

@@AUTOchipasLT thanks for that ..can't see the one with double board ..but it seems to still have selecting pins for ktag etc ...doesn't do galleto ? Is galleto like phoenix ? No need to open ecu ...are there other cloning devices at reasonable prices to clone with out opening ecu ? Thanks

[@AUTOchipasLT]

if you want tool for cloning ecu without opening it , you need PCM FLASH tool. It is best and the most budget tool in the world :)

[@geoffjohnson357]

@@AUTOchipasLT great thanks ...do you have a reference or photo of a good one ? ..I've been using a ch341a I had 2 spare ecu but it wouod on read the eprom of one and nothe original ? One of the spares is only 4 days older than my original ...I suppose it's better to un solder the eprom ? .but I'd like a link to a good cloning ecu tool as you mentioned ..thankyou

[@AUTOchipasLT]

@@geoffjohnson357 ecutools.eu/chip-tuning/pcmflash/ . For full cloning you don't need open ecu. It reads and writes eeprom and flash by connector.

[@ZOOTEDBAE89]

Can it be done without taking it to the dealership to be programmed?

[@AUTOchipasLT]

yes , no need dealership programming.

[@mustafais6304]

Hello dear please tell me the bdm 100 work for all track and generator ecu ?

[@AUTOchipasLT]

no one programmer can cover all ecu's , it is not real. You need to select one which is most needed for you.

[@mrt-ee1zn]

Hi! What is different from BDM mode and boot mode ?

[@glasser2819]

one is more extensive

[@mrt-ee1zn]

@@glasser2819 bdm or boot is same

[@norwindaveramirez6089]

Good day, Lods. Can u creates shared the diagram pinout of 24V Isuzu 4hk1 using Bdm, I just wanna learns in Deleting Egr and dpd
Thanks for sharing
God Bless

[@AUTOchipasLT]

I have not info about that ECU at all.

[@Sniperssx]

can that able for ecu like usa japnes germany cars

[@AUTOchipasLT]

there is no difference about the car, if the ecu has BDM then you can work with that.

[@elmassiouioussama6343]

I used bdm from 2012 by xprog its so slow. Read flash ext 10 mn. But now galetto its better for read write bdm

[@AUTOchipasLT]

yes , it is faster

[@jasmeetoberoi9231]

Hi can you use clones?

[@elmassiouioussama6343]

Ford bdm no problem use clone. But edc17 must use ori tool for safty

[@AUTOchipasLT]

you can use any kind of tool , wiring and pin out is the same

[@michaelwarrell3778]

Hello master, do you know how can I read a edc17 cp47 from a chevy cruze?

[@AUTOchipasLT]

which tool do you have?

[@itorouko2753]

Please I need a complete video of immo delete in vw ecu

[@AUTOchipasLT]

Hi , i work only with GM cars .

[@sajidhajiya12345]

😢