Another great job Kevin , love how you politely told the customer to bog off , drives you mad when they wanna talk all day while your trying to make a living , the Mac uj is a cracking piece of kit , works very hard for you , hate those square clutch adjusters on the Toyota gearboxes , take care man
tu avais seulement des outils à mains ou comme lui pour le faire? tu l'a faite en extérieur aussi? combien de temps pour les nuls? tu as repéré toutes les vis? trouves tu beaucoup de vis différentes? facile de se planter sur quelle vis va où?
Good one! The gearbox bolts in this unit are very good. No white rust. It seems that the weak point in every car is the bearing. Most of them are destroyed. Your ratchet, although very used, seems to be a quality one. I have a few days free during lockdown here and I am preparing to change the timing belt in my Mégane II 1.5 105cv. This video encourages deeply! Thanks! Waiting for next!
@@jusb1066 Yeah. I watched it. Your car was in very good condition! Congrats! And maybe with the bearing that way you could get home at least, but the hydraulic ones... Strange... Just 14000 miles????
@@oscarmontero5724 , nope he did my Aygo, what is exactly the same as the c1, yeah I've commented on a few videos, this is actually how I found Kevin to do my job
Great that works for me! gear box is back on im ready to roll, love your videos you show everyone how to without all of the nonesense we are told by main dealer manuals.
Interesting to see the make of the new clutch aisin never heard of them. Are they reputable.....the weak link in most clutch kits today seems to be poor quality or even faulty release bearings.....not had much luck with LUK kits. How you man handled that box back up and on i'll.never know. I just did one from above using a hoist and that was hard enough!
Have you ever heard of Toyota? Toyota own Aisin. They supply Nissan , GM , Isuzu , Daimler , Suzuki etc. They are the 2nd largest company in the world.
Thank you for your quality work and the video you share. As an engineer, I am interested in seeing the kinematics and design features of car components. It is your videos that give the best picture. If you remove the ball bearing from the rotary fist, then under one side of the landing it if you put a heavy hammer, and hit the other side with a lighter one. The output of the cone rod ball joint to be effective. Ie the moment of inertia of the large mass on the one hand, upon impact with another would be more efficient to give the vibration/deformation of the cone seats. Well, you probably know this already, just the speed and inconvenience of work makes you do something wrong.
Another great job Kevin , love how you politely told the customer to bog off , drives you mad when they wanna talk all day while your trying to make a living , the Mac uj is a cracking piece of kit , works very hard for you , hate those square clutch adjusters on the Toyota gearboxes , take care man
The best mechanic in UK ! Thanks for sharing ! Respect man ! Have a good day !
This guy is a top top mechanic. Love watching the way he works. It's like art!!! Well done yet again Mr.Williams on another fantastic video. 👍👍👍👍
I’m glad the weather is getting warmer for you buddy! Excellent work👍🏻
yes .. even I got fed up with the rain and I didn't have to work in it.
Nice little car to work on, so simple with nothing much in the way. 29:49 had the same sound to your intro 😁
Nice work as usual.
Nice to see Kevin ism gonna do my wife’s Peugeot 108 clutch on Saturday as the thrust baring is starting to get noisy. Great video fella.
He just showed to us that most of the things you can do for free at home. A little bit of knowledge, some tools and loads of fun.
Bravo et merci pour votre aide grâce à vous j'ai changé moi même le kit d'embrayage sur une c1 parfait bonne continuation
Merci beaucoup🍻🍻✨
tu avais seulement des outils à mains ou comme lui pour le faire? tu l'a faite en extérieur aussi? combien de temps pour les nuls? tu as repéré toutes les vis? trouves tu beaucoup de vis différentes? facile de se planter sur quelle vis va où?
Good one! The gearbox bolts in this unit are very good. No white rust. It seems that the weak point in every car is the bearing. Most of them are destroyed. Your ratchet, although very used, seems to be a quality one.
I have a few days free during lockdown here and I am preparing to change the timing belt in my Mégane II 1.5 105cv. This video encourages deeply! Thanks! Waiting for next!
Kevin did my 2015 Aygo clutch a couple of weeks ago, same issue the release bearing was going bad, only 14000 miles
@@jusb1066 Yeah. I watched it. Your car was in very good condition! Congrats! And maybe with the bearing that way you could get home at least, but the hydraulic ones... Strange... Just 14000 miles????
@@oscarmontero5724 I don't know how you watched it he didn't video it 😅
@@jusb1066 Oh. I thought it was yours, but I checked and it was a Fusion. Maybe because you commented then and there. I supposed you were next. Sorry!
@@oscarmontero5724 , nope he did my Aygo, what is exactly the same as the c1, yeah I've commented on a few videos, this is actually how I found Kevin to do my job
Prises de vues au top....excellente video .
Fantastic video Kev 👍👌
respect my friend you are a warrior depuis le sud de la france
Merci beaucoup. Salut a la sud France 🇫🇷
@@WMCS you do only clutchs?
Love your videos keep them coming
Great that works for me! gear box is back on im ready to roll, love your videos you show everyone how to without all of the nonesense we are told by main dealer manuals.
Thanks for the feedback. Much appreciated
good luck my friend . you are the best
Can we have a tool box/ van tour
Must be quite windy there. Looks like your gear is blowing away. Great job by the way your a good grafter very enjoyable❤😂
Super robota bez zbędnego gadania widać że jesteś super fachowcem 👍
haha the old tissue trick love it kevin
J aime beaucoup ton travail. Merci à toi pour ces formidables video
J'aime beaucoup regarder tes vidéos...tu es un mécano efficace
One of my faves these Kevin. Am I on the money at about 3 steady hrs with hand tools?
Yeh., no more than that.
With power tools about 1.5hrs.
@@WMCS Do you travel as far as Lincolnshire in case I get any I'm too busy or can't be arsed to do!?
Definitely within my travel range. 🍻
Interesting to see the make of the new clutch aisin never heard of them. Are they reputable.....the weak link in most clutch kits today seems to be poor quality or even faulty release bearings.....not had much luck with LUK kits. How you man handled that box back up and on i'll.never know. I just did one from above using a hoist and that was hard enough!
Have you ever heard of Toyota? Toyota own Aisin.
They supply Nissan , GM , Isuzu , Daimler , Suzuki etc.
They are the 2nd largest company in the world.
Hope you are keeping well, just a small car for that day.
Another one with the release bearing failure 🤔
Fantastic Video
Amazing
Nice job
2nd one in for the video excellent!
Joy to watch 👌
Well done m8! I hope you have changed brake discs and pads!!...??? ..👍😉
Not my car to change disc and pads unfortunately ✨✨😁.., but thanks for the feedback.,, beers all round 🍺 🍻
Good job , Howard Mary Time for job. Thank you
how many hours did you take you in all to do that 1 job
thanks for sharing the videos!!!
Hi Kevin, what grease are you using on the splined input shaft?
Hello How many Times for this job
A little bit of therapy. Keep safe. 👍🏾
Ninja mechanic :)
23:44 bigger gear box you assembly better this time small goes hard
طريقة عملك جيدة جدا بتوفيق اتابع قناتك
Good job
Trop fort le gars respect
ça semble réalisable mais quand même loin d'être facile pour quelqu'un qui n'en a jamais fait.
Why did you use an aisin clutch and not a Luk clutch like you took out? I am genuinely interested is it price, availability etc?
Because it’s a Toyota engine and that’s the recommended part.
Thanks.
Hello, what is your impact wrench ? A model
Your vidéos was beautiful.
I a French man.
Very Thanks
Milwaukee impact. The best!
Well done Sir, 👍.
Thanks Jason.
I kinda think You should chat abit in your videos
i would replace those brake disks too...
Is it water put on to clean it
No it would be an alcohol based degreaser. Oil or grease is the enemy of the clutch.
Thank you for your quality work and the video you share. As an engineer, I am interested in seeing the kinematics and design features of car components. It is your videos that give the best picture. If you remove the ball bearing from the rotary fist, then under one side of the landing it if you put a heavy hammer, and hit the other side with a lighter one. The output of the cone rod ball joint to be effective. Ie the moment of inertia of the large mass on the one hand, upon impact with another would be more efficient to give the vibration/deformation of the cone seats. Well, you probably know this already, just the speed and inconvenience of work makes you do something wrong.
What do you use as brake cleaner plz
@MrLouthguy your answer doesnt help me but thank you for trying
@@tomas3861 It really doesn't matter what brand brake cleaner you use.
ça se laisse bien voir
Kevin-Albert Ninja
That bucket has seen some oil lad.
Dabastei day Kapplung
22:05
🍻👍
👍🇹🇷🇨🇵
Just 40k from a clutch🙈
Wears gloves = has a girlfriend.
A shame to leave the rear main seal unserviced.