i am not apple polishing but i start my su from su7 since & seen a lots of tutorial..& not many tutors like u who has pushed su so well with your mind..& know how to simplify the process within 10 min without speaking a word..tks a lot anyway..
because I select the edges of the upper face and then place the move command but apparently that is not the case, I would like to know if it is another command or what am I doing wrong?
Hello, I tried this plugin today, but after the point formation, I am trying to move them and create an undulating wall. Points are moving but nothing is happening in a group. I have followed every single thing you said in this video. I have watched it like 10-15 times but I am not able to find a solution. Please help ASAP. Thank you.
Hey, it works great. but I have two questions. If I am working on one block and save the SketchUp file and closed it or it gets crashed, next time if we opening the same file in both the cases, the points which we have created for undulation those won't work. another scenario is that in the same file I can not create points for two blocks. For example, if I have created a one set of points and done undulating a block and then and start doing for next set, in middle I thought of changing the first set of points but again I can not use them for undulating a block. Please provide a solution for these two queries, it will be very helpful especially the second one. Thank you.
limitations 😔 - you cannot create more than one active FFD at a time in same model. - when you re-open the file the ffd point will stop deformation. and if you want to control geometry again via guide points you need to do follinge things to avoid to crash (bugsplat) - remove old guide points group (remove whole group from top level). - explode geometry group and make it group again. - now use sketchyffd again. Thanks
go to extension manager and click on gear icon in top right corner and choice "Unrestricted" and click on confirm button now install again and restart sketchup
Hi, Thanks Please make sure you are following below steps. -Use Group not Component. -(no Sub groups) Group should contain just faces and/or lines. or -Explode and regroup geometry and try again. Thanks
-use Group not Component. -(no Sub groups) Group should contain just faces and/or lines. or -Explode all levels and re-group geometry and then try again. Thanks
make a copy of the top edge loop with move tool move while pressing the ctrl key and place it at the bottom. now without doing any thing just type " 10/ " and press enter key.
seria bueno dejar en claro , que para hacer eso se necesita el plugin FFD , porque no esta en el sketchup normal , me pasado horas tratando de descargar , y voy a tener que hacer lo mismo en 3d max porque sketchup , no me ayuda
@@TutorialsUp You should make it clear that to use FFD, you must download a plugin, I spent hours trying to do it, in the end I could not download it since my sketchup is from 2017
sorry to bother! my ffd did not respond after having displaced 2 construction points as same as u did..pls advise what's wrong..I am using su 2015 pro + window 10 ..tks a lot!
Exploded everything you want to deform and then select everything and make one single group (make sure you have no child groups or components) feel free to ask anything again Thanks
tks a lot, get fixed by clearing all other objs & follow your lecture exactly without any additional annotation made by me as note; by the way i have been rejected by sketchup essential for the making of any jet fighter with booster flame during speed up in su..i wonder if you are the master of su will show us the way to do so (gaseous ejection in su by fredo animator alone)? Tks again!!
ok i will try but the fredo animator still in development mode. thats why i not make any comprehensive tutorials on it. in the recent update fredo6 made huge changes.
Hello, sorry I am encountering the same problem. I have created multiple sheets using the shapes and push/pull tool, the explode option was not available as none were grouped, then I grouped them all and began moving the points. However, similar to marco... the anchors move but the shape does not deform to the anchor points. I am using SU2018 pro +windows 10. thank you very much for the video.
ottimo tutorial, per un principiante come me: hai fatto un buon video. grazie tante. P.S. : c'è un video dove fai vedere come si può stampare il progetto?
Helo Sir , I can not install the gradientator Plugin Sketchup gives an error code, can you help me to find a solution. I am using Scketchup 2017 free version.
i'm 100% sure if you the watch complete on my channel you will find out the solution. the solution is little bit tricky that's why i cannot tell you here. Video Title : Gradient Color In SketchUp Thanks
![Making parametric design wall [art wall]](http://i.ytimg.com/vi/1T2x2X9yBOw/mqdefault.jpg)
i am not apple polishing but i start my su from su7 since & seen a lots of tutorial..& not many tutors like u who has pushed su so well with your mind..& know how to simplify the process within 10 min without speaking a word..tks a lot anyway..
Thank you 😊
Thank You. This was so useful
You're welcome!
The method of dragging the point to reach a curvature as in the figure.
How with the keyboard
Thank you so much, may God bless you!!
You're welcome!
Jazak Allah khier ya Ahmed
because I select the edges of the upper face and then place the move command but apparently that is not the case, I would like to know if it is another command or what am I doing wrong?
i to
Sorry, i don't understand. The mesh is not deforming while moving the guide point.?
I am a beginner in sketchup and I have a question about how I moved the top face and then placed it at the bottom of the volume
In slicer extension. You first create an undulation and then slicer will slice it. Much easier to do.
you are right
Gratidão, saúde , Paz e sucesso TutorialsUp!!!
Hello, I tried this plugin today, but after the point formation, I am trying to move them and create an undulating wall. Points are moving but nothing is happening in a group. I have followed every single thing you said in this video. I have watched it like 10-15 times but I am not able to find a solution. Please help ASAP. Thank you.
Never mind, found a mistake. I did not make rectangles which we have to copy and then soften it. It was a silly mistake. Anyways really good tutorial.
Hey, it works great. but I have two questions.
If I am working on one block and save the SketchUp file and closed it or it gets crashed, next time if we opening the same file in both the cases, the points which we have created for undulation those won't work. another scenario is that in the same file I can not create points for two blocks. For example, if I have created a one set of points and done undulating a block and then and start doing for next set, in middle I thought of changing the first set of points but again I can not use them for undulating a block.
Please provide a solution for these two queries, it will be very helpful especially the second one.
Thank you.
limitations 😔
- you cannot create more than one active FFD at a time in same model.
- when you re-open the file the ffd point will stop deformation.
and if you want to control geometry again via guide points you need to do follinge things to avoid to crash (bugsplat)
- remove old guide points group (remove whole group from top level).
- explode geometry group and make it group again.
- now use sketchyffd again.
Thanks
thank you
Is there a way to array this walls to a curve?
I believe there's a curve tool for straight walls
thank you for the video .. it helped
Glad it helped
WOW, just WOW. TQ
Super handy! It is awesome. Thanks a lot. Just wondering which tool you used to draw that grid at the very beginning of the video?
With : Curvizard plugin
th-cam.com/video/oUdKdEKNLas/w-d-xo.html
I don’t like that you don’t explain it step by step
Your voice is missing
@@joseemiliotlatoaluna6625 Yes, totally agree. If they don't explain what they're doing, I stop the video and move on to something else.
hi when i instal a plugin it says it is unsigned ? sketch up pro 2018
go to extension manager
and click on gear icon in top right corner
and choice "Unrestricted" and click on confirm button
now install again and restart sketchup
Why does my plugin doesnt have the 2x2 3x3 and nxn option in FFD. Been using skp pro 2017.
use Group not component.
in your video, that's the distance of pionts when you move, how i know exactly the distance of the undulating wall? thank you
see in vcb in down right corner while i'm moving c points.
this is the only way because i don't have this model any more.
Thanks.
Great job! Thank you.
hi such great tutorial but i hv problem why the dots shown on the left and right side not on the faces
Hi, Thanks Please make sure you are following below steps.
-Use Group not Component.
-(no Sub groups) Group should contain just faces and/or lines.
or
-Explode and regroup geometry and try again.
Thanks
Great tutorial! Name of the song please?
thank you so much
is the soften edges a plug in? because i cant see it in my options
It's not a plugin
Hello, Mine doesnt work well. Especially during the soften edge part. Can you help?
how i can help you?
if you follow the same direction you definitely get it.
No worries. I got that now. Instead of copying the edges, I copied the face. All sorted. Thank you for the useful video!
Good 👍
Thanks
Hi There, I'm following the same technique (step by Step) but the panels stays straight ! any advice?
-use Group not Component.
-(no Sub groups) Group should contain just faces and/or lines.
or
-Explode and regroup geometry and try again.
Thanks
It worked! Thanks
👍
when i close the file i cant edit again the form right?
thanks brother..!
Help ! My problem is that i don't have the 2x2 / 3x3 / NxN options in the FFD menu !!!!! please help me
Please watch this tutorial - th-cam.com/video/TfRo4GAHuUc/w-d-xo.html
Hi, may i know why i aready drag but it still remain straight?
-use Group not Component.
-(no Sub groups) Group should contain just faces and/or lines.
or
-Explode all levels and re-group geometry and then try again.
Thanks
Fantastic...one more subscriber...tks!
Awesome, thank you!
thats amazing
Thanks for watching.
@@TutorialsUp soory this wepsite i cant dawnload the plugin in
Does this work on a curved wall ?
yes.
@@TutorialsUp can you help me out with one of my project
hi
when i do it for one cube its work but when i tried to make more than one like the video its not work
whats wrong?
your god bro..! 4:49 min you teaches a lot. am using 2021 sketchup.! how i get FFD IN THIS. please help
I just add a link in the description
Thanks for watching.
Hi can i know why you are dividing the rectangle?
make a copy of the top edge loop with move tool move while pressing the ctrl key and place it at the bottom. now without doing any thing just type " 10/ " and press enter key.
the FDD plugin only works if there are points it can pull. if its just a smooth solid surface, the plugin cannot find points to distort the shape
Where can i get FFD from?, searched in the Google Extension Warehouse, but cannot find it!
this is available on .
sketchucation pluginstore for free.
Thanks buddy. Really appreciate your help. Thanks to you my project will be completed on time! :)
i dont know the name of plug in, what the name ?
Plugin Name : SketchyFFD
seria bueno dejar en claro , que para hacer eso se necesita el plugin FFD , porque no esta en el sketchup normal , me pasado horas tratando de descargar , y voy a tener que hacer lo mismo en 3d max porque sketchup , no me ayuda
unable to understand the translation please type in English.
@@TutorialsUp You should make it clear that to use FFD, you must download a plugin, I spent hours trying to do it, in the end I could not download it since my sketchup is from 2017
Please Watch this video
th-cam.com/video/v68a5FXHeo4/w-d-xo.html
hey, I install the plugin from sketchucation but it dont show on my sketchup 2016... help plisss
did you restart sketchup?
Tutorials Up I downloaded the plugin but it doesn’t appear on extension like it usually does... Do I have to do something after I download?
it's only appear in context menu when you right click on group (not component)
Coloquei no SKT 2018 e não aparece em extensões, grato desde já!!!
😍Could u give as some extension pls ? ❣️
& Thank u for this video it was sOoo useful
Many extensions are free which one do you want?
Thanks for watching 😊
FFD DIMENSION, regarding to WxDxH (in feet,m or mm?)
in current model units
sorry to bother! my ffd did not respond after having displaced 2 construction points as same as u did..pls advise what's wrong..I am using su 2015 pro + window 10 ..tks a lot!
Exploded everything you want to deform
and then select everything and make one single group (make sure you have no child groups or components)
feel free to ask anything again
Thanks
tks a lot, get fixed by clearing all other objs & follow your lecture exactly without any additional annotation made by me as note; by the way i have been rejected by sketchup essential for the making of any jet fighter with booster flame during speed up in su..i wonder if you are the master of su will show us the way to do so (gaseous ejection in su by fredo animator alone)? Tks again!!
ok i will try but the fredo animator still in development mode.
thats why i not make any comprehensive tutorials on it.
in the recent update fredo6 made huge changes.
Hello, sorry I am encountering the same problem. I have created multiple sheets using the shapes and push/pull tool, the explode option was not available as none were grouped, then I grouped them all and began moving the points. However, similar to marco... the anchors move but the shape does not deform to the anchor points. I am using SU2018 pro +windows 10. thank you very much for the video.
ottimo tutorial, per un principiante come me: hai fatto un buon video. grazie tante. P.S. : c'è un video dove fai vedere come si può stampare il progetto?
Thank you
how did you do the soft part?? when i try it it doenst get soft
can you please mention the time ? where in this video
Thanks
@@TutorialsUp 0:50
Come portare questo modello in 2d per poterlo tagliare?
Helo Sir , I can not install the gradientator Plugin Sketchup gives an error code, can you help me to find a solution.
I am using Scketchup 2017 free version.
i'm 100% sure if you the watch complete on my channel you will find out the solution.
the solution is little bit tricky that's why i cannot tell you here.
Video Title : Gradient Color In SketchUp
Thanks
I can't find the extension in the extension warehouse? Can you help me find it
Available on "SketchUcation Plugin Store"
hi sir whene i move the points i can't see the defomation of my object , what is the problem ?
use Group not Component.
-(no Sub groups) Group should contain just faces and/or lines.
or
Explode and regroup geometry and try again.
Thanks
hi Raouf. Can you make like that?
Looking for this in Archicad. Any Ideas?
No!Sorry.
can anyone help me with the download link to the plugin
search "Sketchy FFD by CPhillips" on google and open first SketchUcation link.
Error Loading File gradientator.rb
Error: #
DONT DOWNLOAD THIS PLUGIN!!! ITS BROKEN!!!
watch this how to fix this problem: th-cam.com/video/RKYdLkRfDBE/w-d-xo.html
Does anyone want to make me a company logo and I’ll pay you for your time?
Buensalido hahaha
غعب
What's Wrong?