I bought a New MS170 and I had the same problems with it shutting down after it was run for a short period. I took it back Twice and the finely put a New coil on and I Never hsd any more trouble with it.
Just bought the 171 as my first REAL saw. Had a little, very used, McCulloch that I learned on. I LOVE this little Stihl! I keep up with my husband using his Husqvarna 455 like a boss!!!!
Husqvarna Ranchers are a joke, bought for my Stihl 028 Supper was down. Hated that Husqvarna and got MS 171 to replace the junk Husqvarna 240 which went to repair shop after every time I used it.
The problem your having that you mentioned at the end of the video is down to over heating, use a better quality 2 stroke oil. Something fully synthetic preferably.
That’s interesting. I’m surprised that the Stihl oil I’m using wouldn’t be up to par. Although, since this video was shot years ago, it really doesn’t seem to have this issue anymore.
@@jettlash1000 thanks for the video I just bought one with a 6pk of Stihl oil. The guy at Ace said it will probably run sub par for awhile till it breaks in. Sounds like that's yours smoothed out. excited to put it's through it's paces this weekend
Moin Die 170 ist das kleinste Modell von stihl und hat wenig Ausstattung die 171 hat hin gegen mehr Ausstattung und bissl mehr ps die 180 ist das gleiche wie die 170 nur mit mehr PS Hoffe ich konnte helfen
+Riley Redden I really like the saw, but the only downside is the lack of power. I got the smaller 171, so I'm not going to be able to cut down anything too big or too hard. Overall it's exactly what I needed.
Good video I am thinking about buying a Stihl MS171 for my birthday. I already have a MS170 at the moment but it is really leaky in terms of the fuel cap. If I fill the fuel or bar and chain oil to the top not the brim it just leaks from the cap everywhere no problem though if I fill the tank halfway but still its a pain. I would like to know from you does your stihl MS171 leak fuel or bar and chain oil everywhere? Thank you and good video.
+Michael Marko Thanks for the kind remarks! This thing NEVER leaks a drop of gas or chain oil. I was a little nervous about the quick release caps, but they are very good! It's also remarkable because I run it all the way between -15 degrees F to around 100 degrees F. Even with all that temperature swing, it still doesn't leak at all!
You didn't explain that you should engage the trigger before moving he start stop lever to full choke to start. This saw is notorious for flooding out so it either starts easily or very hard.
The self-primer is terrible. It's always 20-30 pulls from a cold start. Today was even worse. 15 pulls, check to make sure I didn't flood. 15 more pulls, repeat... I think I pulled it 50-60 times on full choke before it fired (though it has been a while since I used it). And no, it wasn't flooded. It's been a pain since day one. Stihl needs to give up on the automatic primer and put the bulb back on.
Voor Vooort I have my MS171 for 3 years and haven't had one single issue. I know at least 5 other guys running MS171 for much longer then me and none of them have had any issues. What I see in many of these videos is people forcing the lever up or down without pulling the throttle. There's a proper procedure.
I just watched the Last Samurai free on YT before your video. Here’s your MS171. Save us the trouble..... (just joking) “Do you believe a man can change his destiny?” I believe a man does what he can on one leg until his destiny is revealed......
+thomas grepne I would agree, not a smart thing to do. This may be a good example of what NOT to do. I was so focused on showing off the chainsaw, I didn't even think of it. I always assume everyone knows what should be worn, but new comers may not.
Been using a chainsaw 5 or 6 days a week for over 10 years and have never once worn a helmet or any chainsaw clothing. I would recommend people to wear protective clothing but stop making a big deal about it ffs do you put all your gear on to chop logs
This video should really be removed. I don't want to come across as a jerk or know it all but you are saying things directly contrary to cardinal rules of chainsaw use. "I make sure my chain brake is released"!? While STARTING it? THat's like saying "I make sure the safety if off while I load my firearm". Unless you're cutting, the brake it on. Other concerns have already been mentioned in the coments below.
My understanding is that the chain brake is meant to shut the chain off in the event your arm/body gets pushed forward or the saw kicks back. It will shut the chain off. I was told not to use when starting, because it’s hard on the saw.
Told by who? Do you have the manual? Page 37. You don't bring the engine to high RPM with the brake engaged but when starting or the saw is at idle, put the brake on.
Bare legs, trainers that don’t look as though they are steel capped, walking about in a tangle of branches, chain not locked as he wanders about… not a GREAT safety demo!
![หาทำ EP.41 : ผัดวุ้นเส้นที่รักกับนายกล้วยหอม “หลิง-ออม” [Eng Sub] | จือปาก](http://i.ytimg.com/vi/r2jrLOQRthI/mqdefault.jpg)
I bought a New MS170 and I had the same problems with it shutting down after it was run for a short period. I took it back Twice and the finely put a New coil on and I Never hsd any more trouble with it.
Have fun with it! Just be careful! Or better still - Learn to use it Properly! 👍
I have the MS 171 myself. Love it. :)
What happens if it turns over on the second try and it shuts off like the first time you did do I put it up again
Just bought the 171 as my first REAL saw. Had a little, very used, McCulloch that I learned on. I LOVE this little Stihl! I keep up with my husband using his Husqvarna 455 like a boss!!!!
Husqvarna Ranchers are a joke, bought for my Stihl 028 Supper was down. Hated that Husqvarna and got MS 171 to replace the junk Husqvarna 240 which went to repair shop after every time I used it.
I got a free McCullock well my friend his dad had a McCullock 110 in he use it once so he give it free to me
Cool thanks mate.
+Michael Marko No problem, thanks for watching!!
The problem your having that you mentioned at the end of the video is down to over heating, use a better quality 2 stroke oil. Something fully synthetic preferably.
That’s interesting. I’m surprised that the Stihl oil I’m using wouldn’t be up to par. Although, since this video was shot years ago, it really doesn’t seem to have this issue anymore.
@@jettlash1000 Good Lad. Excellent reply
@@jettlash1000 thanks for the video I just bought one with a 6pk of Stihl oil. The guy at Ace said it will probably run sub par for awhile till it breaks in. Sounds like that's yours smoothed out. excited to put it's through it's paces this weekend
One thing I did on mine which help that problem was to put on 14" bar instead of the 16". Engine is too small to run 16".
Try using WD40 mixed with olive oil and milk of magnesia, works a treat
I put new oragon chain on it cuts better now than new hate the caps mine are hard to get on
Not the cheapest saw they make but they should really replace the 170 with this but give it a better side cover. And second bar but.
☺️☺️☺️
What is better a Husqvarna 236 or this Saw?
The Stihl, but my opinion. I have ran all kinds of saws and I have liked Stihl the best, may pay more, but get your money's worth at the end.
Everyone giving him a hard time about how he starts it and wearing shorts and I’m just over here like YOLO!! I think I’m gonna buy one! 😆
Great little saws, around 700 hours on mine and only thing replaced are chains.
my brother called this saw a knife :D
Anyone know the real difference between the 170, 171, and 180?
Moin
Die 170 ist das kleinste Modell von stihl und hat wenig Ausstattung die 171 hat hin gegen mehr Ausstattung und bissl mehr ps die 180 ist das gleiche wie die 170 nur mit mehr PS
Hoffe ich konnte helfen
@@Fendt-Farmer also the 180 is comfort which is what C stands for in name.
Good video bro!!! Just a friendly FYI "chain cover" is actually called a scabbard but no worries XD
Thank you sir!
where did you buy for 189.00 ? i get a price for 299.00 by me ?
Ace Hardware.
Some places sell them for $179.99 now
They are $159 this month at Stihl dealer. $20 off.
Do you like the saw
+Riley Redden I really like the saw, but the only downside is the lack of power. I got the smaller 171, so I'm not going to be able to cut down anything too big or too hard. Overall it's exactly what I needed.
Good video I am thinking about buying a Stihl MS171 for my birthday. I already have a MS170 at the moment but it is really leaky in terms of the fuel cap. If I fill the fuel or bar and chain oil to the top not the brim it just leaks from the cap everywhere no problem though if I fill the tank halfway but still its a pain. I would like to know from you does your stihl MS171 leak fuel or bar and chain oil everywhere? Thank you and good video.
+Michael Marko Thanks for the kind remarks! This thing NEVER leaks a drop of gas or chain oil. I was a little nervous about the quick release caps, but they are very good! It's also remarkable because I run it all the way between -15 degrees F to around 100 degrees F. Even with all that temperature swing, it still doesn't leak at all!
Cheaper to just replace the caps on 170.
You didn't explain that you should engage the trigger before moving he start stop lever to full choke to start. This saw is notorious for flooding out so it either starts easily or very hard.
The self-primer is terrible. It's always 20-30 pulls from a cold start. Today was even worse. 15 pulls, check to make sure I didn't flood. 15 more pulls, repeat... I think I pulled it 50-60 times on full choke before it fired (though it has been a while since I used it). And no, it wasn't flooded. It's been a pain since day one. Stihl needs to give up on the automatic primer and put the bulb back on.
Wow $180 is great value, it’s €300 in Ireland
I got mine for 190
I love chainsaws with good suspension
Ditto.
Try piece of hardwood not softwood
The place I got mine put a china chain on it it was new chain was junk saw is no way what I'm use to poor quality mine is
There is one model below this that’s cheaper
I have better luck with poulan these 170s either the throttle or choke breaks easily.
Voor Vooort I have my MS171 for 3 years and haven't had one single issue. I know at least 5 other guys running MS171 for much longer then me and none of them have had any issues. What I see in many of these videos is people forcing the lever up or down without pulling the throttle. There's a proper procedure.
I just watched the Last Samurai free on YT before your video.
Here’s your MS171. Save us the trouble..... (just joking)
“Do you believe a man can change his destiny?”
I believe a man does what he can on one leg until his destiny is revealed......
Where are your chainsaw chaps?
Should have had them on for the video. Quick video = cut corners = accident. Taking that note for future videos.
you shouldn't be using a chainsaw... no protective clothing and using it all wrong. Improper use of the chain brake.
+thomas grepne I would agree, not a smart thing to do. This may be a good example of what NOT to do. I was so focused on showing off the chainsaw, I didn't even think of it. I always assume everyone knows what should be worn, but new comers may not.
Been using a chainsaw 5 or 6 days a week for over 10 years and have never once worn a helmet or any chainsaw clothing. I would recommend people to wear protective clothing but stop making a big deal about it ffs do you put all your gear on to chop logs
That’s like saying you shouldn’t be driving a car because you don’t wear your seatbelt 🤦♂️
@@Fuckyoutube99I bet those guys get out of the shower to pee too!
Shorts lol
Learn to use it. 😂
douche
That saw should have eaten that log. You need to sharpen that chain pal.....
Chain was new.
OMG! Shorts? before you cut your leg, put some chaps on! Suspension? Chain Cover? Good god, you shouldn't have a saw
Sorry, I was young and dumb. I don't cut trees with shorts and no protection anymore.
This video should really be removed. I don't want to come across as a jerk or know it all but you are saying things directly contrary to cardinal rules of chainsaw use. "I make sure my chain brake is released"!? While STARTING it? THat's like saying "I make sure the safety if off while I load my firearm". Unless you're cutting, the brake it on. Other concerns have already been mentioned in the coments below.
My understanding is that the chain brake is meant to shut the chain off in the event your arm/body gets pushed forward or the saw kicks back. It will shut the chain off. I was told not to use when starting, because it’s hard on the saw.
Told by who? Do you have the manual? Page 37. You don't bring the engine to high RPM with the brake engaged but when starting or the saw is at idle, put the brake on.
I start mine with the break disengaged. Less stress on the clutch when it goes into high idle.
@@TheWoodsmanMilling i do as well
Bare legs, trainers that don’t look as though they are steel capped, walking about in a tangle of branches, chain not locked as he wanders about… not a GREAT safety demo!