2" Fulcrum Suspension Lift + New Wheels and Black Bear Tyres for my D22 Navara
ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2020
- It's been a quick minute but I'm finally able to put out some videos again. Still have to get more comfortable being in front of a camera but I guess that'll just take time.
If you enjoyed the video, you might as well give it a like and subscribe, it goes a long way.
Cheers, Anthony.
Follow me on Instagram: / anthony_james_catania - ยานยนต์และพาหนะ
Dude love the comentry, so raw lol.
Great Vids bud👏👏
Every full rotation on the torsion bar is 5mm
Dear @Anthony James Catania, thank you for providing me with the reference of the materials used
Looks great mate 👍👍😎
Looks like you take good care of that D22.
Nice work bro
Good video brother. Made it easy as
Good video, I'm also running 32s on mine but they scrape with anything less than a 3 inch suspension lift,,thats even with cutting the plastic out of the guards. I'll check out the hammer idea though.
I cut of a lil bit of the mettal instead and when i did that i also cut out a pice of the mud guards therefore i could fit them as well
Front fender cut works when tyre traveling up n down when taking a corner?
Hi,
I use on my, 255/85 R16 and the same rims 16x8JJ
Can I please have the link to where you got the lift
Nice lift! I got the same car zd30 too but fronts only raised on torsions and back is not raised at all. 50mm difference in height and looking ugly on my Ute, you reckon just leaf springs with 45mm lift ?would go fine on the back alone without bushings and shocks ?
Great vid
Anthony James Catania wow ! I didn’t know that I could lift the back just by using shackles, that would save me so much tbh ! Thank you brother
Full wog house with all the gardening supplies
Hahha yep
How do rate this setup looking for something new
They are 31s bro, mine are the same size
Hey mate
What’s your opinion on the tyres now? Looking at options…
I actually won them from a giveaway so that’s why I’m using them, in saying that I was really happy with them on and off road. If I was to buy another set I would probs try the maxxis razrs just for something different
Thanks for this, I got a '05 Nav but I ain't mechanically savvy. Learning lots. Guess I have to read more forums.
We’re always learning fam! Enjoy your Nav
im about to get a d22, but not sure if I go that 2 inch lift or the Bilstein or Raw set. what was this like 3 and a bit years later?
I had no issues while owning it, my mates the new owner and haven’t heard anything bad about it
Got a question for you mate. I see on the Fulcrum site they say you have to upgrade your torsion bars if you’ve got a steel bull bar. Did you ? Just curious. I just purchased a d22 single cab recently and the ride is horrendous !
Yeah, ended up putting toughdog HD ones in
Ended up watching that episode yesterday 👍
How much lift do u think I can get max out of adjusting that torsion bar? Thanks man
You'll get a fair bit if you respline them, just depends how harsh of a ride you want. Think I kept 10-20mm off the bump stops when I adjusted mine
hey mate hows the laws when taking the mud guard off the front? any dramas ?
i got defected for not having them
Hey mate, Deciding if I should get this fulcrum lift kit or raw. would raw be worth the money or save a couple 100 and buy the fulcrum?
Good video
Hey man, have you got anything weird happening with your steering since you’ve lifted it?
@@anthonyjamescatania I’ve got a 3” snake racing kit in and it’s been nothing but trouble since I got it.. I’ve replaced everything to do with the steering plus all ball joints and control arm bushes and my tie rods and draglink are clashing with my chassis and control arm mount and I’m getting a lot of independent steering movement between my front wheels whenever I lift one or when it extends .. I’ve attributed the independent movement to roll throughout the six ball joints and there’s nothing I can do about that but it’s not even driveable off road with the steering/chassis clearance issues.. was hoping you could shed some light but starting to think the d22 simply can’t run a 3 inch kit
@@intolerance9677 I'm running a 3 inch lift and had to buy drag link designed for big lift. PSR make one for $250. The standard one won't last long at all and then you start having the problems you described.
When I got the ute it looked like it was still running the original steering components with stock tyres, as soon as the lift and 32s went on it flogged out within a few drives.
@@083sean thanks man, you would have just solved my problem. I just put a psr drag link in a couple weeks ago but and it’s sweet as now, I was getting roll through the 6 ball joints in my steering. The psr drag link has swivel joints only allowing rotation.. I replaced every bush and joint also got the snake racing HD drag link but nothing solved my problem until the psr drag link.
Can you help me to install my 2inch body lift 😁🤙
Mate I'm thinking of getting 31s on mine but it's got no lift kit , do you think it'll fit .
Cheers
Not too sure, maybe ask on the Facebook forums
Can you tell me how you lifted the rear?
Just with the new leafs that came with the kit
Shit, I got 285/75/R16 could be a problem aye. What do you reckon
Thanks mate have the bilstein 2” in the back it’s just really stiff so I can’t actually do it myself which is shit. But thanks for the speedy reply should go for a off road wheel some day. Kidding
Hi,I'm looking aftermarket upper control arm, would u let me know where can get it? Thanks mate
Hey mate, I got the superior engineering ones
Что у тебя за инженерные решения,где взять нестандартный рычаг?
Where is the Torno cover from
Ute covers direct
i would love to get a d22 navara
Alreddy got one
Where'd you buy your kit?
From fulcrum
Supper looking good picup
Noice Nav mate.
How the f#ck did you get a full kit for $850 ?!
Cheers man, got it when the sales were on haha
I’m Etelvino Vieira António and I text you from Luanda, Angola 🇦🇴
Good video mate, but try an stop saying "umm" as much haha driving me nuts 😅