@opticsmedia.official That was why I made the video. I always heard of people fitting it but never found a explanation of it. I don't mind questions at all.
If you run it through the factory wiring and connector it will more than likely melt the wiring or damage the Fuel pump controller. Make sure you do a hardwire on it either I wire or custom
Also, which Iwire fuel pump wire kit you got? Im looking to do the same set up, and I dont have a Radium hanger, I want to do the same thing you did lol
@opticsmedia.official the kit i installed was actually for a 2002-2007 chasis. From a buddies car. But get the year for your car cause I'm sure the lengths are different
Yes, I currently have it in the car and will post videos of what I saw and how it changed everything for the better. Im making well over 500whp no problem, rock solid fuel pressure!
@sergiosegovia7845 I have a I-wire hardwire kit so it has its own connection. It no longer uses the factory connector on the top of the fuel pump housing
@denniswilliams3993 Unfortunately I did not make a video of the install of my I wire kit but I don't mind making one. If you have any specific questions I can answer I have no problem doing so
I know it’s not recommended but I tried to use oem plugs and pump prime but I had no fuel pressure nothing melted just No pressure any suggestions? Not sure if an oring Wa not in right or not.. also had difficulty getting it to fully seat on clips
@denniswilliams3993 did you use the clip off the oem pump on the bottom like I did in the video? Also I know I didn't remove the fuel pump in the video but I stated I cut about 1/4 inch off the top nipple to allow the pump to fully seat
I did remove about a 1/4” and mine wasn’t oem it was a dw65c from previous owner but I did use a clip off of it I think my wiring may be in the way of it fully seating.. have to disassemble again and have a look
@@opticsmedia.official iwireusa.com/products/fuel-pump-controller-hardwire-kit-in-tank-single-pump Just choose the chasis and the fuel pump hanger your using.
I just bought the 450Walbro today and was lookin into using stock Hanger and your the only vid I seen and Sorry to ask you much questions.
@opticsmedia.official That was why I made the video. I always heard of people fitting it but never found a explanation of it. I don't mind questions at all.
How did it work for you? What did you modify? And did it stutter at all?
@Xenoviathewrx you shouldn't be modifying anything on the housing other than setting up the hanger for hardwire with the two studs
@@D-TunedGarage how do I make studs? Rn I'm just using the plug. Could that cause my stuttering?
@Xenoviathewrx That is absolutely dangerous and should not be done. That pump will melt the wires and can cause a 🔥. Radium sells a simple stud kit
Mine just came in today and I’m currently about to watch this
If you run it through the factory wiring and connector it will more than likely melt the wiring or damage the Fuel pump controller. Make sure you do a hardwire on it either I wire or custom
@@D-TunedGarage I bought 2 installation kits the one MAP recommended was dw and just the universal installation walbro has just incase 😂
@@JermJermFlores hell yeah, if you have any questions hit me back up
@@D-TunedGarage will do 😂 so probably within the next few days
Also, which Iwire fuel pump wire kit you got? Im looking to do the same set up, and I dont have a Radium hanger, I want to do the same thing you did lol
@opticsmedia.official the kit i installed was actually for a 2002-2007 chasis. From a buddies car. But get the year for your car cause I'm sure the lengths are different
Have you ran the car with it like that?
Yes, I currently have it in the car and will post videos of what I saw and how it changed everything for the better. Im making well over 500whp no problem, rock solid fuel pressure!
I also wanted to ask where does that connection up top connect to? I’m planning to run it just like you meanwhile I save up for that radium hanger!
@sergiosegovia7845 I have a I-wire hardwire kit so it has its own connection. It no longer uses the factory connector on the top of the fuel pump housing
Do you have a video of how you wired it up? I know ya used iwire just wondering how it all hooks up
@denniswilliams3993 Unfortunately I did not make a video of the install of my I wire kit but I don't mind making one. If you have any specific questions I can answer I have no problem doing so
I know it’s not recommended but I tried to use oem plugs and pump prime but I had no fuel pressure nothing melted just No pressure any suggestions? Not sure if an oring Wa not in right or not.. also had difficulty getting it to fully seat on clips
@denniswilliams3993 did you use the clip off the oem pump on the bottom like I did in the video? Also I know I didn't remove the fuel pump in the video but I stated I cut about 1/4 inch off the top nipple to allow the pump to fully seat
I did remove about a 1/4” and mine wasn’t oem it was a dw65c from previous owner but I did use a clip off of it I think my wiring may be in the way of it fully seating.. have to disassemble again and have a look
Do you have the Link to that Iwire kit?
@@opticsmedia.official iwireusa.com/products/fuel-pump-controller-hardwire-kit-in-tank-single-pump
Just choose the chasis and the fuel pump hanger your using.
Anybody that completed this install. Did you have any issues with stuttering while driving?
@Xenoviathewrx I never have...and if it's installed correctly it shouldn't affect the driveability