With the proper dipstick tool 10323A the fluid is measured from top of the fluid check hole. Dipstick in video measures from bottom of the pan. Fluid level will not be at right level.
What do I loosen the top starter bolt with?? I'm having trouble getting that bolt loose, it's not strip I don't have enough clearance so what else can I use??
I got you. for anybody that needs help with this. You need an a short 16/17 I believe with a swivel and a long extension and a rachet. You have to angel your self and the rachet in the same angle. Brace yourself in a way and boom u should be able to get it lose . It's all in the angel where u have it at.
Do you have a video on changing the transmission valve body on a 2015 Chrysler 200?
Thanks for the video. What size is the fill plug? Also, some videos say its allen-type and others say torx.
Drain plug = 8mm allen
Check plug = 6mm allen
With the proper dipstick tool 10323A the fluid is measured from top of the fluid check hole. Dipstick in video measures from bottom of the pan. Fluid level will not be at right level.
What do I loosen the top starter bolt with?? I'm having trouble getting that bolt loose, it's not strip I don't have enough clearance so what else can I use??
I got you. for anybody that needs help with this. You need an a short 16/17 I believe with a swivel and a long extension and a rachet. You have to angel your self and the rachet in the same angle. Brace yourself in a way and boom u should be able to get it lose . It's all in the angel where u have it at.
Make sure your alined with the bolt and u should have enough leverage to get it off
Does it need to be in neutral?
In park
8mm allen is what mine was